LG 32LM3400 Manuale utente
User Guide
This is a 「User Guide」 installed on the TV.
The contents of this guide are subject to change without prior notice for quality
improvement.
GP2
GP2
eng
❐Automatically Setting Up Programme
SETTINGS ➾ SETUP ➙Auto Tuning
Automatically tunes the programmes.
1 Select Country where the TV is used. Programme settings change depending
on the country you choose.
2 Initiate Auto Tuning.
3 Select Input Source of your choice.
4 Set Auto Tuning following screen instructions.
✎If Input Source is not connected properly, programme registration may not
work.
✎Auto Tuning only finds programmes that are currently broadcasting.
✎If Lock System is turned on, a pop-up window will appear asking for
password.
GP2
eng
❓Cable DTV Setting option
When searching for programmes using FULL setting it can take a long time. The
following values are needed in order to search all available programmes quickly
and correctly. The commonly used values are provided as “default”.
• Frequency : Enter a user-defined frequency.
• Symbol rate : Enter a user-defined symbol rate (Symbol rate: Speed at which
a device such as modem sends symbols to a programme).
• Modulation : Enter a user-defined modulation. (Modulation: Loading of audio
or video signals onto carrier).
• Network ID : Unique identifier allocated for each user.
• Start Frequency : Enter a user-defined start frequency range.
• End Frequency : Enter a user-defined end frequency range.
GP2
eng
❐Cable DTV Setting
SETTINGS ➾ SETUP ➙ Cable DTV Setting
[In Cable mode only]
When Channel Auto Update is On, you can update information for all the
programmes that can be updated, including the programme currently being
watched. When Channel Auto Update is Off, you can only update information for
the programme currently being watched.
✎The range that a user can select from the Service Operator menu differs
depending on number of Service Operator supported by each country.
✎If number of supported Service Operator for each country is 1, corresponding
function becomes inactive.
✎You can not select the Cable DTV Setting when the service operator is set to
“Ziggo”.
GP2
eng
❐To use Manual Tuning
SETTINGS ➾ SETUP ➙ Manual Tuning
Adjusts programmes manually and saves the results.
For digital broadcasting, signal strength and signal quality can be checked.
For analogue broadcasting, you can set up station names and use fine tuning.
Normally fine tuning is only necessary if reception is poor.
GP2
eng
❐To edit programmes
SETTINGS ➾ SETUP ➙ Programme Edit
Edits the saved programmes.
Set as favourite programme, block/unblock programme, skip programme etc. of
the selected programme.
GP2
eng
Press TEXT button.
[depending on the country]
Teletext is a free service provided by the TV station that offers text-based
information about TV programmes, news and weather.
The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT
systems.
• Colour button: To select the preceding or following page.
• Number button: Enters the desired page number.
• ꔵ: To select the preceding or following page.
GP2
eng
❐Special Teletext Function
Press T. OPT button.
Select the Text Option menu.
• ꔻIndex : Select each index page.
• ꔾTime : When viewing a TV programme, select this menu to display the
time at the top right hand corner of the screen.
• ꕀHold : Stops the automatic page change which will occur if a teletext
page consists of 2 or more sub pages.
GP2
eng
• ꔽReveal : Select this menu to display concealed information, such as
solutions to riddles or puzzles.
• ꔼUpdate : Displays the TV picture on the screen while waiting for a new
teletext page.
• Language [In Digital Mode Only] : Sets Teletext language.
Altri manuali per 32LM3400
2
Indice
Altri manuali LG TV
LG
LG 55EC9300 Manuale utente
LG
LG 26LC2R Series Manuale utente
LG
LG KB-14P2B Manuale utente
LG
LG SM86 Series Manuale utente
LG
LG 47LW5300UC Manuale utente
LG
LG 30FZ4D Manuale utente
LG
LG Centric 37LT777H Manuale utente
LG
LG Flatron L3200TF Manuale utente
LG
LG CE-29Q46ET Manuale utente
LG
LG RT-29FD15R Manuale utente
