LG LT36 Series Manuale utente
www.lg.com
OWNER’S MANUAL
LED LCD TV
Please read this manual carefully before operating your
set and retain it for future reference.
LT36**
2
ENG
ENGLISH
TABLE OF CONTENTS
TABLE OF CONTENTS
3 LICENSES
3 OPEN SOURCE SOFTWARE NOTICE
4 INSTALLATION PROCEDURE
4 ASSEMBLING AND PREPARING
4 Unpacking
7 Parts and buttons
8 Lifting and moving the TV
9 Setting up the TV
9 - Attaching the stand
11 Mounting on a table
12 Mounting on a wall
14 Tidying cables
14 MAKING CONNECTIONS
15 Adapter connection
15 External speaker out
15 Antenna connection
16 HDMI connection
16 DVI to HDMI connection
17 Composite connection
17 RGB-PC connection
17 USB connection
18 REMOTE CONTROL
19 MAINTENANCE
19 Cleaning your TV
19 - Screen, frame, cabinet and stand
19 - Power cord
19 TROUBLESHOOTING
20 SPECIFICATIONS
23 IR CODES
24 EXTERNAL CONTROL DEVICE
SETUP
24 RS-232C Setup
24 Type of connector;
D-Sub 9-Pin Male
24 RS-232C Configurations
25 Communication Parameters
25 Command reference list
26 Transmission / Receiving Protocol
WARNING
yIf you ignore the warning message, you may
be seriously injured or there is a possibility
of accident or death.
CAUTION
yIf you ignore the caution message, you may
be slightly injured or the product may be
damaged.
NOTE
yThe note helps you understand and use
the product safely. Please read the note
carefully before using the product.
3
LICENSES / OPEN SOURCE SOFTWARE NOTICE
ENGENGLISH
LICENSES
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby Laboratories.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays
DivX video. Visit divx.com for more information and software tools to convert your
files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered
in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete your registration.
“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”
“DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or
its subsidiaries and are used under license.”
Covered by one or more of the following U.S. patents :
7,295,673; 7,460,668; 7,515,710; 7,519,274
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this
product, please visit http://opensource.lge.com .
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are
available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of media, shipping and handling) upon email request to
product.
4INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
ENG
ENGLISH
NOTE
yImage shown may differ from your TV.
yYour TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
yThe available menus and options may differ from the input source or product model that you are
using.
yNew features may be added to this TV in the future.
yThe TV can be placed in standby mode in order to reduce the power consumption. And the TV should
be turned off if it will not be watched for some time, as this will reduce energy consumption.
yThe energy consumed during use can be significantly reduced if the level of brightness of the picture
is reduced, and this will reduce the overall running cost.
INSTALLATION PROCEDURE
1 Open the package and make sure all the accessories are included.
2 Attach the stand to the TV set.
3 Connect an external device to the TV set.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
CAUTION
yDo not use any unapproved items to ensure the safety and product life span.
yAny damages or injuries by using unapproved items are not covered by the manufacturer’s warranty.
ySome models have a thin film attached on to the screen and this must not be removed.
NOTE
yThe items supplied with your product may vary depending on the model.
yProduct specifications or contents of this manual may be changed without prior notice due to upgrade
of product functions.
yFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick
and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory
stick does not fit into your TV’s USB port.
A
B
A
B
*A
<
=
10 mm
*B
<
=
18 mm
5
ASSEMBLING AND PREPARING
ENGENGLISH
Remote control and
batteries (AAA)
(See p. 18) Owner’s manual
Cable holder
(Depending on model)
(See p. 14) Power Cord
Stand Screws
4 EA, M4 x 12
2 EA, M4 x 16
(Only 22LT36**) (See p. 9)
Stand Screws
8 EA, M4 x 12
(Only 26LT36**) (See p. 9)
Stand Screws
8 EA, M4 x 14
(Only 32/37/42/47LT36**)
(See p. 10)
Desk-mount Screw
1 EA, M4 x 20
(Only 32/37/42/47LT36**)
(See p. 11)
Stand body / Stand base
(Only 22LT36**)
(See p. 9)
Stand body / Stand base
(Only 26LT36**)
(See p. 9)
Stand body / Stand base
(Only 32/37/42/47LT36**)
(See p. 10)
Protection cover
(Only 32/37/42/47LT36**)
(See p.13)
Power Cord holder
(Only 32/37/42/47LT36**)
(See p. 14)
Isolator
(Depending on model)
(See p. 6)
DC Adapter
(Only 22/26LT36**)
(See p. 15)
FREEZE
RATIO
L/RSELECT
ENTER
BACK EXIT
Q.MENU
INFO
MENU
CHVOL
P
A
G
E
FAV
3D
MUTE
1 2 3
4 5 6
7 8
0
9
MARK
LIST
FLASHBK
ENERGY
SAVING
TV
AVMODE
INPUT
LIST
Q.VIEW
TV/RAD
ENERGY
SAVING
RATIO
SETTINGS
GUIDE
Q.MENU
INFO
EXIT
FAV
MUTE
P
A
G
E
P
or
6ASSEMBLING AND PREPARING
ENG
ENGLISH
NOTE
yAntenna Isolator Installation Guide
- Use this to install TV in a place where there is a voltage difference between TV Set and GND of
antenna signal.
»If there is a voltage difference between TV Set and GND of antenna signal, the antenna contact
might be heated and excessive heat might cause an accident.
- You can improve the safety when watching TV by efficiently removing power voltage from TV an-
tenna. It is recommended to mount the isolator to the wall. If it cannot be mounted to the wall, mount
it on the TV. Avoid disconnecting the antenna Isolator after installation.
- Before starting, be sure that the TV antenna is connected.
ANTENNA/
CABLE IN
Cable / Antenna
Wall
Isolator
1. Connect to TV.
2. Connect to Set-Top box.
Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box.
“Equipment connected to the protective earthing of the building installation through the mains connection
or through other equipment with a connection to protective earthing - and to a cable distribution system
using coaxial cable, may in some circumstances create a re hazard. Connection to a cable distribution
system has therefore to be provided through a device providing electrical isolation below a certain
frequency range (galvanic isolator, see EN 60728-11)”
When applying the RF Isolator, a slight loss of signal sensitivity can occur.
or
7
ASSEMBLING AND PREPARING
ENGENGLISH
Parts and buttons
Button Description
v ^
Scrolls through the saved programmes.
- + Adjusts the volume level.
Turns the power on or off.
R
USB IN
AV IN 2
L/MONO
R
AUDIO
VIDEO
IN 3
USB IN
AV IN 2
L/MONO
R
AUDIO
SPEAKE R OUT
VIDEO
P
P
OK
INPUT
HOME
P
R
IN 3
Screen
Speakers
(Only 22/26LT36** )
(Only 32/37/42/47LT36**)
Power Indicator
(Can be adjusted using
the Power Indicator in the
OPTION menu.)
Remote control
8ASSEMBLING AND PREPARING
ENG
ENGLISH
Lifting and moving the TV
When moving or lifting the TV, read the following to
prevent the TV from being scratched or damaged
and for safe transportation regardless of its type
and size.
CAUTION
yAvoid touching the screen at all times, as this
may result in damage to the screen.
yIt is recommended to move the TV in the
box or packing material that the TV originally
came in.
yBefore moving or lifting the TV, disconnect
the power cord and all cables.
yWhen holding the TV, the screen should face
away from you to avoid damage.
yHold the top and bottom of the TV frame
firmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.
yWhen transporting a large TV, there should
be at least 2 people.
yWhen transporting the TV by hand, hold the
TV as shown in the following illustration.
yWhen transporting the TV, do not expose the
TV to jolts or excessive vibration.
yWhen transporting the TV, keep the TV
upright, never turn the TV on its side or tilt
towards the left or right.
9
ASSEMBLING AND PREPARING
ENGENGLISH
Setting up the TV
Image shown may differ from your TV.
Attaching the stand
Front
1 3
2
M4 x 12
4 EA
Stand Body
Stand Base
M4X20
Top View
22/26LT36**
M4 x 16
2 EA
(Only 22LT36**)
M4 x 12
4 EA
(Only 26LT36**)
10 ASSEMBLING AND PREPARING
ENG
ENGLISH
32/37/42/47LT36**
Front
Stand Body
Stand Base
M4X20
Top View
M4 x 14
4 EA
M4 x 14
4 EA
CAUTION
yWhen attaching the stand to the TV set,
place the screen facing down on a cushioned
table or flat surface to protect the screen
from scratches.
yMake sure that the screws are fastened
completely. (If they are not fastened securely
enough, the TV may tilt forward after being
installed.)
yDo not fasten the screws with too much
force; otherwise they may be worn out and
get loosened
NOTE
yRemove the stand before installing the TV
on a wall mount by performing the stand
attachment in reverse.
1 3
2
Altri manuali per LT36 Series
2
Indice
Altri manuali LG TV
LG
LG 32FS4D Manuale utente
LG
LG RT-21FB55M/R/RX/V/VE Manuale utente
LG
LG M237WAP-PM.ATH Manuale utente
LG
LG 32FS4RMP Manuale utente
LG
LG CA-21M60E Manuale utente
LG
LG Flatron M197WD Manuale utente
LG
LG 26LG3000 Manuale utente
LG
LG MC-059C Manuale utente
LG
LG 29FS2RKE Manuale utente
LG
LG 39LN51 Series Manuale utente
