LG WM2240CS Manuale utente
OWNER’S MANUAL
WASHING MACHINE
WM2240CS
P/No.:MFL62526883 www.lg.com
Please read this manual carefully bef re perating
y ur set and retain it f r future reference.
ENGLISH ESPAÑOL
roduct Feature
P
ontents
C
2
Warnings...............................................................................................3
Specification..........................................................................................4
Installation.............................................................................................5
Care before washing...........................................................................10
Using the dispenser ............................................................................11
Function ..............................................................................................13
ow to use washer .............................................................................14
Maintenance .......................................................................................20
Troubleshooting guide ........................................................................23
■Ultra Capacity
The Larger drum enables not just higher head drop and stronger
centrifugal force, but also less tangling and wrinkling of the laundry.
eavier loads, such as king size comforters, blankets, and curtains, can
be washed.
■Direct Drive System
The advanced Brushless DC motor directly drives the drum without belt
and pulley.
■Tilted Drum and Extra Large Door Opening
Tilted drum and extra large opening make it possible to load
and unload clothing more easily.
■Automatic Wash Load Detection
Automatically detects the load and optimizes the washing time.
■Child Lock
The Child lock prevents children from pressing any button to change the
settings during operation.
■Magnetic Door Plunger
Safely and conveniently secure the door slightly ajar with a magnetic door
plunger. This will promote air circulation and allow the interior of the
machine to dry. To use this feature, after the load has been removed, do
not close the door completely. When the magnetic door plunger comes
into contact with the metal washer cabinet, it will secure the door slightly
open allowing the interior of the washer to dry.
추가선택 예약
추가선택 예약
arnings
W
3
ENGLISH
For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.
!
READ ALL INSTRUCTIONS BEFORE USE
WARNING!
• Read all instructions before using the washer.
• Do not wash articles that have been previously
cleaned in, washed in, soaked in, or spotted with
gasoline, dry cleaning solvents, or other
flammable or explosive substances, as they give
off vapors that could ignite or explode.
• Do not add gasoline, dry cleaning solvents, or
other flammable or explosive substances to the
wash water. These substances give off vapors
that could ignite or explode.
• Under certain conditions, hydrogen gas may be
produced in a hot water system that has not
been used for 2 weeks or more. YDROGEN
GAS IS EXPLOSIVE. If the hot water system
has not been used for such a period, before
using the washing machine, turn on all hot water
faucets and let the water flow from each for
several minutes. This will release any
accumulated hydrogen gas. As the gas is
flammable, do not smoke or use an open flame
during this time.
• Do not allow children to play on or in the washer.
Close supervision of children is necessary when
the washer is used near children.
• Before the washer is removed from service or
discarded, remove the door to prevent children
from hiding inside.
• Do not install or store the washer where it will be
exposed to the weather.
• Do not tamper with controls.
• Do not repair or replace any part of the washer
or attempt any servicing unless specifically
recommended in the user-maintenance
instructions or published user-repair instructions
that you understand and have the skills to carry
out.
• See Installation Instructions for grounding
requirements.
• ALWAYS follow the fabric care instructions
supplied by the garment manufacturer.
• Do not place items exposed to cooking oil in
your washer. Items contaminated with cooking
oils may contribute to a chemical reaction that
could cause a load to catch fire.
• Do not use fabric softeners or products to
eliminate static unless recommended by the
manufacturer of the fabric softener or product.
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk
of electric shock by providing a path of least resistance for electric current. This appliance is equipped with
a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
• Do not use an adapter or extension cord.
• Do not remove ground prong.
• If you don’t have the proper outlet, consult an electrician.
IMPORTANT SAFETY INSTRUCTIONS
WARNING :To reduce the risk of fire, electric shock, or injury to persons when using
the washer, follow basic precautions, including the following:
SAVE THESE INSTRUCTIONS
WARNING :Improper connection of the equipment-grounding conductor can result in risk of electric
shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance
is properly grounded. Do not modify the plug provided with the appliance - if it does not fit the outlet,
have a proper outlet installed by a qualified electrician.
!
!
pecification
S
4
Name : Front loading washing machine
Power supply : 120 V~, 60 z
Size : 686 mm(W)×756 mm(D)×983 mm( ) /
1297 mm (D, door open)
Weigh : 87 kg (191.8 libras)
Wash capacity : 15 kg (33 libras)
Max. Watt : 600 W
Spin speed : 1200 rpm max.
Permissible water pressure : 0.3-10kgf/cm2(30-1000kPa)
❋The appearance and specifications may be varied without notice to raise the units quality.
Accessories
Inlet hose 2EA Spanner Caps (4EA) Tie Strap Elbow Bracket Non-skid
pads
nstallation
I
5
ENGLISH
1. To prevent internal damage during
transport, the special 4 bolts are locked.
Before operating the washer, remove
the bolts along with the rubber bungs.
• If they are not removed, it may cause severe
vibration, noise and malfunction.
3. Take out the 4 bolts along with the rubber
bungs by slightly twisting the bung. Keep
the 4 bolts and the spanner for future use.
• Whenever the appliance is transported, the
transit bolts must be refitted.
The appliance is fitted with transit bolts to prevent internal damage during transport.
2. Unscrew the 4 bolts with
the spanner supplied.
4. Close the holes with the caps supplied.
Removing transit bolts
cap
Install or store where it will not be exposed to temperat res below freezing or exposed to the weather.
Properly gro nd washer to conform with all governing codes and ordinances.
To red ce the risk of electric shock, do not install the washer in h mid spaces.
The base opening m st not be obstr cted by carpeting when the washing machine is installed on a
carpeted floor.
In co ntries where there are areas which may be s bject to infestation by cockroaches or other
vermin, pay partic lar attention to keeping the appliance and its s rro ndings in clean condition at
all times.
Any damage which may be ca se by cockroaches or other vermin will not be covered by the appliance
g arantee.
Transit bolts
6
nstallation
I
■Installation clearances
The location must be large enough to fully open
the washer door.
■Washer dimensions
• Most installations require a minimum
10 cm clearance behind the washer.
■Minimum installation spacing for recessed
area installation.
The following dimensions shown are for the
minimum spacing allowed.
Additional spacing should be considered for
installation and servicing.
• Additional clearances might be required
for wall, door and floor moldings.
• Additional spacing of 2.5 cm on all
sides of the washer is recommended to
reduce noise transfer.
Companion appliance spacing should also be
considered.
[Front view]
[Side view]
129.7 cm
68.6 cm
75.6 cm
98.3 cm
■Level floor
• Allowable slope under entire washer is 1°.
• To minimize noise and vibration, the washer
MUST be installed on a solidly constructed floor.
• Carpeting and soft tile surfaces are not
recommended.
• Never install the washer on a platform or weakly
supported structure.
NOTE: A firm, solid floor is even more critical to a front-
loading washer than to a top-loader.
If yo r floor is wood and/or frame constr ction, yo
may need to reinforce it. Front-loaders se
s bstantially faster spin speeds than top-loaders,
ca sing greater vibration. If the floor is not solid,
yo r washer will vibrate. Yo will hear and feel the
vibration thro gho t yo r ho se.
■Power outlet
• Must be within 60 in. (1.5 m) of either side of the
washer. Do not overload the outlet with more
than one appliance.
• Time-delay fuse or circuit breaker is recommended.
NOTE: It is the personal responsibility and obligation of the
c stomer to have a proper o tlet installed by a
q alified electrician.
7
ENGLISH
nstallation
I
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit
which powers only that appliance and has no additional outlets or branch circuits. Check the
specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have
the cord replaced with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched,
closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where
the cord exits the appliance.
CAUTION
▶
Water supply pressure must be between 30kPa and 1000kPa
(0.3~10kgf/cm2)
▶
D n’t strip r cr ssthread when c nnecting Inlet h se t the valve.
▶
If the water supply pressure is m re than 1000kPa, a dec mpressi n device
sh uld be installed.
• Two rubber seals are supplied with the water inlet hoses these are in
order to prevent water leaks.
• Check water tightness of washing machine connections by turning the
tap completely on.
• Periodically check the condition of the hose and replace the hose if
necessary.
• Make sure that there is no kink on the hose and that it is not crushed.
▶
When y ur washer has tw valves,
• The Inlet hose which has red connector is for the hot water tap.
• If the washer has two valves, the energy is saved by using hot valve.
Washing Machine is to be connected to the water mains using new hose-sets and that old
hose-sets should not be used.
Connecting water supply hose
1. Do not use an extension cord or double adapter.
2. If the supply cord is damaged, it must be replaced by the manufacturer or its service agents or
similarly qualified person in order to avoid a hazard.
3. Always unplug the machine and turn off the water supply after use.
4. Connect the machine to an earthed socket in accordance with current wiring regulations.
5. The appliance must be positioned so that the plug is easily accessible.
• Repairs to the washing machine must only be carried out qualified personnel. Repairs carried out by
inexperienced persons may cause injury or serious malfunctioning. Contact your local service center
• Do not install your washing machine in rooms where temperatures below freezing may occur. Frozen hoses
may burst under pressure. The reliability of the electronic control unit may be impaired at temperatures below
freezing point.
• If the appliance is delivered in the winter months and temperatures are below freezing : Store the washing
machine at room temperature for a few hours before putting it into operation.
Electrical connection
ose connector
Rubber seal
ot water tap
ot(Option)Cold
Cold water
tap
8
nstallation
I
Installation of drain hose
about
about
about
max. 100cm
min. 60cm
ose
Retainer
Laundry tub
Tie
strap
max. 100cm
min. 60cm
about
about
about
• The drain hose should not be placed
higher than 100 cm above the floor.
• Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
• When the drain hose is too long, do
not force back into the washer. This
will cause abnormal noise.
• When installing the drain hose sink,
secure it tightly with a string.
• Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
• Place the end of the drain hose in the
hole of the floor drain system.
This equipment is not designed for maritime use or for use mobile installations such as
caravans, aircraft etc.
Turn off the stopcock if the machine is to be left for any length of time (e.g. holiday),
especially if there is no floor drain(gully) in the immediate vicinity.
When disposing of the appliance, cut off the mains cable, and destroy the plug Disable the
door lock to prevent young children being trapped inside.
Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is a risk
of suffocation !
Keep all packaging well away from children.
9
ENGLISH
nstallation
I
Level adjustment
Installation of non-skid pads (optional)
1. Adjusting the washing machine level properly prevents
excessive noise and vibration.
Install the appliance on a solid and level floor surface,
preferably in a corner of the room.
NOTE: Extend the feet no more than necessary to level the
washer. The more the feet are extended, the more the
washer will vibrate.
2. If the floor is uneven, adjust the adjustable feet as
required. (Do not insert pieces of wood etc. under the
feet)
Make sure that all four feet are stable and resting on the
floor and then check that the appliance is perfectly level.
(Use a spirit level)
❊After the washer is level, tighten the lock nuts up towards
of the base of the washer. All lock nuts must be tightened.
NOTE: If there are vibration and noise d ring the spin cycle,
re-check the leveling of the washer, adj st the feet as
req ired, and tighten the lock n ts sec rely to prevent
changes in adj stment.
R n the washer with a test load to make certain yo r
washer is properly leveled. P t approximately 6 po nds
of la ndry in the machine. Then, press POWER,
RINSE+SPIN, and START/PAUSE, in that order.
When the machine spins at high speed, verify that it is
stable. If not, adj st
❊ Diagonal Check
When pushing down the edges of the washing machine top
plate diagonally, the machine should not move up and down at
all. (Please, check both of two directions)
f machine rocks when pushing the machine top plate
diagonally, adjust the feet again.
Some floor surfaces are too slippery to
prevent the washer from moving on the floor
during heavily unbalanced loads. While it is
normal for an occasional load to be out of
balance, excess noise and vibration can
result from the washer moving out of position.
If these conditions are encountered, follow
the instructions below for installation of the
non-skid pads. These pads will help prevent
the washer from moving during heavy out of
balance conditions thereby reducing noise
and vibration.
• Non-skid pads
✼ Place the pads under both front feet.
Adjustable feet Adjustable feet
Lock nut
This side up
Stick adhesive side to floor
Remove backing
10
are before washing
C
1. Fabric Care Labels
Look for a care label on your clothes. This will tell you about the fabric content of your
garment and how it should be washed.
2. Sorting
To get the best results, sort clothes into loads that can be washed with the same wash
cycle.
Different fabrics need to be washed in different ways.
Always sort dark colors from pale colors and whites. Wash separately as dye and lint
transfer can occur causing discoloration of white clothing. If possible, do not wash
heavily soiled items with lightly soiled ones.
Soil (Heavy, Normal, Light) Separate clothes according to amo nt of soil.
Color (White, Lights, Darks) Separate white fabrics from colored fabrics.
Lint (Lint Prod cers, Collectors) Wash lint prod cers and lint collectors separately.
3. Check before loading
Combine large and small items in a load. Load large items first.
Large items should not be more than half the total wash load.
Do not wash single items. This may cause an out-of-balance load. Add one or two similar
items.
• Check all the pockets to make sure that they
are empty. Things such as clip, matches,
pens, coins, and keys can damage both your
washer and your clothes.
• Close zippers, hooks, and strings to make
sure that these items do not snag on other
clothes.
• Pretreat dirt and stains by brushing a little
detergent dissolved in water onto stains like
collars and cuffs to help lift dirt.
WARNING
To reduce the risk of fire, electric shock, or injury to persons, read the
IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
NOTE: Do not wash or spin water-proof clothes.
Indice
Lingue:
Altri manuali LG Rondella
LG
LG F4J5QNP Series Manuale utente
LG
LG P8071R3F Manuale utente
LG
LG TH2518DSAW Manuale utente
LG
LG WM25BV2S6BR Manuale utente
LG
LG WM3800H A Series Manuale utente
LG
LG Steam Washer WM0742H series Guida all'installazione
LG
LG T9508TEFTW Manuale utente
LG
LG F4V712WTSE Manuale utente
LG
LG WTS21HHBK Manuale utente
LG
LG T8008TEDLH Manuale utente
LG
LG WD22 V2S6R Series Manuale utente
LG
LG WTL3-09W Manuale utente
LG
LG WM1455HPA Manuale utente
LG
LG WD-15436RD Manuale utente
LG
LG F1495BD(1~9) Manuale utente
LG
LG WM8100H A Series Manuale utente
LG
LG WTV09BSL Manuale utente
LG
LG F1280FD Manuale utente
LG
LG T1693EFHSKL Manuale utente
LG
LG WD-MD658 Manuale utente
