Lian-Li O11 DYNAMIC XL Manuale utente
All manuals and user guides at all-guides.com
all-guides.com
* * Composants du boîtier * Case components Guía de instalación
*
* * Gehäusekomponenten機殼部品介紹
- 1 -
IO ports: USB 3.0 x 2, USB 3.1 x 1(Type-c) HD audio & mic,
ARGB control button (M: Mode, C: Color)
USB 3.0 x 2
Power switch / reset button
J
ARGB LED strip
Supporting 120 mm fan x 3 or 140 mm fan x 2 or 360 mm radiator x 1
Removable fan/SSD tray: Supporting 120 mm fan x 3 or 140 mm fan x 2 or 360 mm radiator x 1 or 2.5” SSD x 3
G H
I
J
K
Additional SSD trays x 3: Supporting 120 mm fan x 3 or 360 mm radiator x 1 or 2.5” SSD x 3
Removable SSD tray: Supporting 2.5” SSD x 3
Supporting 120mm fan x 1
Hot swappable drive trays: Supporting 3.5” HDD x 4 or 2.5” SSD x 4 or ATX PSU x 2
KPSU tray: Supporting ATX PSU x 1
All manuals and user guides at all-guides.com
- 2 -
* 零件盒部品一覽表
* Hardware list * Lista de materiales
* Liste des pièces
* Hardwareliste *
Rubber pad
for PSU mounting
Screws
for 2.5" SSD mount
24 pcs
d
for motherboard mount
Stand-off bolt
Screws
for motherboard &
2.5" SSD mount
(Spare parts)
b
3 pcs
g
28 pcs
a
Screws
for PSU mounting
c
8 pcs
16 pcs
Screws
for 3.5" HDD mount
ef
4 pcs
Velcro
for cable management
g
Exceeded quantity are spare parts.
多餘的零件數量是備品.
Zusätzliche Teile können als Ersatzteile verwendet werden.
Les pièces supplémentaires sont des pièces de rechange.
Exceeded quantity are spare parts.
For Graphics Card Anti-Sag Bracket (GB-001) installation
4 pcs2 pcs2 pcs
2 pcs 2 pcs 2 pcs
Screws
for fan mounting
4 pcs
d
2 pcs
All manuals and user guides at all-guides.com
* Remove top panel
* 卸下頂部面板
* Retirer le panneau supérieur
* Entfernen Sie die obere
Abdeckung
* Retire el panel superior
*トップパネルを取り外す
* Remove side glass & front
* 卸下側面玻璃及前面玻璃
* Enlever le verre latéral et frontal
* Entfernen Sie die Seiten-
und Frontscheibe
* Retire el vidrio lateral y frontal
*
glass
サイド＆フロントガラスを取り外す
- 3 -
Peel off the protective film
on both sides
!
Attention:
1
2
3
Pull to release
the glass.
All manuals and user guides at all-guides.com
- 4 -
Instalación de la fuente de alimentación
*
*
PSU installation
*
電源供應器安裝
*
Installation du plateau du bloc
d'alimentation
*
*PSU-Einsatz installieren
1
2
c
g
*
Kabel installieren
Guía de instalación de los cables
電源/系統指示燈接線定義
Diagramme d’installation des câbles
*
* Cable guideinstallation
*
*
*
POWER SW
BLACK / WHITE -
BLACK +
HDD LED
BLACK / WHITE -
BLACK +
RESET SW
BLACK / WHITE -
BLACK +
POWER LED
POWER LED
BLACK +
BLACK / WHITE -
To install 2 more PSUs, remove the 2 hot swappable drive trays.
All manuals and user guides at all-guides.com
- 5 -
To install a special spec MB (ex. MB including a LED module and/or a thicker shield),
please trim the rubber pads.
!
All manuals and user guides at all-guides.com
all-guides.com
- 6 -
1
2
3
1
2
e
Connecting to PSU
Connecting to MB
2.5" SSD / 3.5" HDD installation
Installation de 2.5" SSD / 3.5" HDD
2.5" SSD / 3.5" HDD-Installation
Instalación de 2.5" SSD / 3.5" HDD
a
2.5" SSD / 3.5" HDD
2.5" SSD / 3.5" HDD のインストール
All manuals and user guides at all-guides.com
- 7 -
Press to release the HDD tray
or
d
*
* 2.5
*Instalación
*
* 2.5" SSD-Installation
* 2.5" SSD installation
* 2.5" SSD
安裝
*Instalación de SSD 2.5"
*
*
Installation de 2.5" SSD
2.5" SSD の取り付け
*
3+1 additional SSD trays can be installed on the front right side and/or on the removable fan/SSD tray on the bottom
All manuals and user guides at all-guides.com
- 8 -
*
* 2.5 *Instalación
*
* 2.5" SSD-Installation* 2.5" SSD installation
* 2.5" SSD 安裝 *Instalación de 2.5" SSD
*
*
Installation de 2.5" SSD 2.5" SSD の取り付け
*
*
*
* Gestion des câbles
* Kabelmanagement
* Mantenimiento
de cable
*
整線
ケーブル
Cable management
管理
f
All manuals and user guides at all-guides.com
Top
Bottom
*
灰塵濾網拆卸
Remove the magnetic dust filters
*
* Retirez les filtres à air
* Entfernen Sie Luftfilter
* Retire los filtros de aire
*
Side
HD AUDIO
Blue
Black purple
Yellow
Gray
Red
10
8
6
4
2
9
7
5
3
1
Green
Key
Orange
N.C.
GND+H.S. TUBE
USB 3.0
Supports motherboard
USB 3.0 20 Pin header
11
20
10
1
*
* I/O port
* Installation du port E/S
* I/O-Port installieren
* Instalación de los puertos de E/S
*
I/O ports function
功能說明
I/O
USB 3.1 GEN.2
MODE
COLOR
TYPE-C MIC SPK
USB3.0-2 USB3.0-1 P_SW/HDD
9
— Mode
8 Lighting Effects:
1. 1st-7th: MCU Built-in Lighting Mode
2. 8th: Sync Up the ARGB Lighting With The Motherboard
(1) Connecting The Header To The Motherboard
(2) To Turn Off The Lighting, Press The Button For
3 Sec. To Turn It On, Press Again For 3 Sec
C- Color
Press C To Control The 7 Built-in Static Colors
M
C
All manuals and user guides at all-guides.com
Altri manuali per O11 DYNAMIC XL
2
Altri manuali Lian-Li Hardware per computer
Lian-Li
Lian-Li UNI FAN SL V2 Manuale utente
Lian-Li
Lian-Li O11 DYNAMIC EVO XL Manuale utente
Lian-Li
Lian-Li UNI FAN SL120 V2 RGB Manuale utente
Lian-Li
Lian-Li UNI FAN SL-INF Manuale utente
Lian-Li
Lian-Li O11DE-9X Manuale utente
Lian-Li
Lian-Li UNI FAN SL RGB Manuale utente
Lian-Li
Lian-Li A4-H2O Manuale utente
Manuali Hardware per computer popolari di altre marche
EMC2
EMC2 VNX Series Manuale del proprietario
Panasonic
Panasonic DV0PM20105 Manuale utente
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuale utente
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuale utente
Raidon
Raidon iT2300 Manuale utente
National Instruments
National Instruments PXI-8186 Manuale utente
