Life Gear 97910 Manuale utente

MOTION CAPTURE

MOTORIZED TREADMILL

OWNER'S MANUAL

MODEL# 97910

Get active for life

2006, Feb.

TABLE OF CONTENTS

ONE YEAR LIMTED WARRANTY

LifeGear Inc. warrants to the original purchaser that this product is free from defects in material and workmanship when used for the purpose

intended, under the conditions that it has been installed and operated in accordance with LifeGear's Owner's Manual. LifeGear's

obligation under this warranty is limited to replacing or repairing, free of charge, any parts which may prove to be defective under normal home

use. This warranty does not include any damage caused by improper operation, misuse or commercial application.

From the date of purchase, the frame is warranted to be free from defects for 1 (one) year. This warranty is extended only to the original owner

and is not transferable. When ordering replacement parts please have the following information ready:

1. Owner's Manual

2. Model Number

3. Description of Parts

4. Part Number

5. Date of Purchase

WARRANTY 1

SAFETY INSTRUCTIONS 2

OVERVIEWDRAWING 4

PARTS LIST 5

HARDWARE PACKING LIST 7

ASSEMBLY INSTRUCTIONS 8

CAUTION 9

FOLDUP&INCLINEADJUSTMENT 10

COMPUTER OPERATION 11

LUBRICATION & RUNNING BELTADJUSTMENT 14

Observe the following prior to use of the treadmill:

DANGER: To reduce the risk of electric shock, please observe the following:

zAlways unplug the treadmill from the electrical outlet immediately after using and before cleaning, assembling, or servicing.

NOTE: Failure to follow these instructions may lead to personal injury and cause damage to the treadmill.

WARNING: To reduce the risk of burns, fire, electric shock please observe the following:

zNever leave the treadmill unattended when plugged in.Disconnect by turning off the master power switch, and unplugging from outlet.

zNever operate this treadmill if it has a damaged cord or plug, is not working properly, if it has been dropped or damaged, or if it has been

exposed to water.

zDo not attempt any maintenance or adjustments other than those described in this manual. Should any problems arise, discontinue use and

consult theAuthorized Service Representative.

zDo not use outdoors.

zDo not operate where aerosol (spray can) products are being used or where oxygen is being administered.

zDo not pull the treadmill by its power cord or use the cord as a handle.

zClose supervision is necessary if this treadmill is used by, or near children, persons with disabilities, or pets.

zKeep Dry-do not operates in a wet or moist condition. Save these instructions.

zDo not operate under a blanket. Excessive heating can occur and cause fire, electrical shock, or injury to

persons.

zKeep electrical cord away from heated surfaces.

zNever insert any object into any opening.

zKeep the treadmill on a solid, level surface with sides at least two feet from any wall. Be sure the area around

the treadmill remains clear during use and has adequate clearance, see illustration below.

WARNING: Connect the treadmill to a properly grounded outlet only.

FRONT

REAR

TOP

VIEW

2 FEET MIN. 2 FEET MIN.

4 FEET MINIMUM

LEFT

SIDE

RIGHT

SIDE

SAFETY INSTRUCTIONS

zThis product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current reducing

the risk of electric shock. * This treadmill is equipped with a cord having equipment grounding connector and a grounding plug. The plug must

be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

DANGER: Improper connection of the treadmill grounding connector can result in the risk of electric shock. Check with a qualified

electrician, if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the

treadmill. If it will not fit your outlet, have a properly grounded outlet installed by a qualified electrician.

zThis unit must be plugged into a normal 220 volt 50/60 hz, which has a grounding.

zKeep hands clear of all moving parts. Never place hands, feet under the treadmill.

zDo not use the treadmill on a carpet that is greater than 1/2 inch in height.

zBefore each use, check that the running belt is aligned and centered on the treadmill bed and all visible fasteners on the treadmill are

sufficiently tightened and secure.

WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM CONSULT YOUR PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR

INDIVIDUALS OVER THE AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL INSTRUCTIONS BEFORE

USING ANY FITNESS EQUIPMENT. WE ASSUME NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE

SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT. DO NOT OPERATE THIS EXERCISE EQUIPMENT WITHOUT

PROPERLY FITTED GUARDS, AS THE MOVING PARTS CAN PRESENT A RISK OF SERIOUS INJURY TO YOUNG CHILDREN.

CAUTION: Read all instructions carefully before operating this product. Retain this Owner’s Manual for future reference.

OVERVIEWDRAWING

81 77

80 78

34L34L

34R

37R

37L

Part # Description Quantity Part # Description Quantity

1 Main Frame 1

2 Stabilizer 1

3 End Cap for Stabilizer 2

4 Adjustable Pad (M8) 2

5 Moving Wheel 2

6 Running Belt 1

7 Running Deck 1

8 Front Roller 1

9 Rear Roller 1

10 Motor 1

11 Motor Bracket 1

12 Bushing (Ø25.4*Ø10*20) 2

13 Axis (Ø10*539) 1

14 Cap Nut (Ø 12.7) 2

15 Belt 5PJ190 1

16 Bracket forDrive Motor 1

17 Power Control Board 1

18 Switch, AC Power (KB97) 1

19 Power Cord (1900mm) 1

20 Fuse Box (10A) 1

21 Wire Cap 1

22 Sensor Cable I (850 mm.) 1

23 Sensor Cable II (1100 mm.) 1

24 Sensor Cable III (600 mm.) 1

25 Foot Pad 2

26 Sensor (7R26-17F) 1

27 Bracket for Sensor 1

28 Incline Beam 1

29 Cover for Incline Beam 2

30 Spacer (Ø18*Ø10.5*15.5mm) 2

31 Deck Bumper 8

32 End Cap ( 25*50) 2

33 Side Rail (947mm) 2

34R Rear Cap (Right) 1

34L Rear Cap (Left) 1

35 Dust Cover, Upper 1

36 Dust Cover, Lower 1

37R Handlebar Support (Right) 1

37L Handlebar Support (Left) 1

38 Handlebar 1

39 Foam Grip (Ø30*Ø37*410) 2

40 Speed Button W/Wire 2

41 Connecting Wire of Ring

for Cable Power 750mm 2

42 End Cap for Handlebar 2

43 Computer (SD4053-1) 1

44 Safety Tether Key 1

45 Safety Tube A 1

46 Bushing 1

47 Spring Knob 1

48 Safety Tube B 1

49 Square End Cap ( 25.4) 1

50 Square End Cap ( 20) 1

51 Spacer (Ø13.5*Ø8.5*14mm) 2

52 Spring Washer (M8) 16

53 Hex Socket Head Cap Bolt (M8*40mm) 2

54 Nylon Nut (M6) 8

55 Tapping Screw (M4*16mm) 16

PARTS LIST

56 Bolt (M6*33mm) 8

57 Bolt (M8*60mm) 2

58 Screw (M3x10mm) 2

59 Hex Socket Button Head

Cap Bolt (M8*40mm) 1

60 Nylon Washer (M8) 2

61 Nylon Nut (M8) 3

62 Bolt (M8*35mm) 1

63 Bolt (M10*40mm) 2

64 Nylon Nut (M10) 4

65 Screw (M4*60mm) 4

66 Bolt (M8*12) 2

67 Bolt (M10*100mm) 2

68 Screw (M4*12) 11

69 Nylon Nut (M4) 7

70 Bolt (M8*16mm) 12

71 Washer (Ø11*Ø21*1.8) 2

72 Washer (Ø8.5*Ø18*1.5) 6

73 Washer (Ø4.2*Ø12*0.8) 4

74 Computer Knob (M5) 4

75 Choke (34MH-40MH) 1

76 Wave Filter (06SS4-2DC1) 1

77 Wire for Fuse Box (CM-125) 2

78 Cable Switch/PCB (CM-90) 2

79 Wire Cap (10A) 1

80 Earth Lead (CM-115) 1

81 Ring for Cable Power (Ø26*13) 1

Part # Description Quantity Part # Description Quantity

PARTS LIST

52 Spring Washer (M8)----------------------------------------------------------------------------------------12

70 Bolt (M8*16mm) ------------------------------------------------------------------------------------12

72 Washer (Ø8.5*Ø18*1.5)-----------------------------------------------------------------------------6

74 Computer Knob (M5)--------------------------------------------------------------------------------4

PLACE WASHER, BOLT’S END, OR

SCREW ON CIRCLE TO CHECK FOR

CORRECT SIZE.

INCHES

MILLIMETERS

Part # Description Quantity

HARDWARE PACKING LIST

Step 1

Connect the Sensor Cable II (23) from the Right Handlebar Support (37R) to the Sensor Cable

III (24) from the Stabilizer (2).Attach the Right and Left Handlebar Supports (37R,37L) to the

Stabilizer (2) with six Spring Washers (52) and Bolts (70).

Step 2

Connect the Sensor Cable I (22) from the Handlebar (38) to the Sensor Cable II (23) from the

Right Handlebar Support (37R). Attach the Handlebar (38) to the Right and Left Handlebar

Supports (37R,37L) with six Washers (72), Spring Washers (52), and Bolts (70).

Step 3

Connect the Sensor Cable I (22) and Speed Wires (40) to the wires that come from the

Computer (43). Then attach the Computer (43) onto the Handlebar (38) with four Computer

Knobs (74). Finally, install the Safety Tether Key (44) onto the Computer (43).

ASSEMBLY INSTRUCTIONS

37R

37L

37R

37L

72 22

Before beginning a workout session ensure Safety Tether Key is properly installed onto the Computer Console and the

Safety Clip is securely attached to an article of your clothing.

Always begin the treadmill standing on the side rails-not on the running belt. Allow the treadmill to reach a speed of at

least 0.8km before walking on the running belt.

Operating in Quick Start Mode

Ensure this treadmill is plugged into a nominal 220 volt 50/60hz, which has a grounding plug.

Step 1: Power Up

zPress the Master Power Switch located at the front of the treadmill to ON position. The LCD console will immediately run a self

diagnostic display. After that it will display current system status.

Step 2: Begin Workout

zPress the START/STOP button and then press the FAST button to begin operation.

zAs the running belt speed reaches 0.8km, you can start walking on the treadmill. Adjust to the desired speed by pressing the

FAST button. Press the SLOW button to decrease speed. The LCD console will immediately display when you adjust the speed.

CAUTION

Indice

Altri manuali Life Gear Tapis roulant

Life Gear

Life Gear 98850 Manuale utente

Life Gear

Life Gear 97630 Manuale utente

Life Gear

Life Gear 97988T Manuale utente

Life Gear

Life Gear 97430 Manuale utente

Life Gear

Life Gear 97415 Manuale utente

Life Gear

Life Gear 97780 Manuale utente

Life Gear

Life Gear 97010 Manuale utente

Life Gear

Life Gear 40120 Manuale utente

Life Gear

Life Gear PACE MAKER PRO 97320 Manuale utente

Life Gear

Life Gear STEP MAKER PRO 97340 Manuale utente

Life Gear

Life Gear 98840 Manuale utente

Life Gear

Life Gear 97530 Manuale utente

Life Gear

Life Gear MARK X 97582H Manuale utente

Life Gear

Life Gear POWER TRACK PLUS 97362 Manuale utente

Life Gear

Life Gear FLIP TRACK II 97270 Manuale utente

Life Gear

Life Gear 97620 Manuale utente

Life Gear

Life Gear Energetic Pro Manuale utente

Life Gear

Life Gear CAMINADORA 97001 Manuale utente

Life Gear

Life Gear 97240 Manuale utente

Life Gear

Life Gear 97875 Manuale utente

Life Gear

Life Gear 97830 Manuale utente

Life Gear

Life Gear 97295 Manuale utente

Life Gear

Life Gear 40120 Manuale utente

Life Gear

Life Gear 97114 Manuale utente

Manuali Tapis roulant popolari di altre marche

Treadly

Treadly TREADLY 2 Manuale utente

HEALTH ONE

HEALTH ONE Walk Ro Manuale utente

NordicTrack

NordicTrack NTL12941 Manuale utente

NordicTrack

NordicTrack T7.5 S Manuale utente

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Manuale utente

Merax

Merax MS282992 Manuale utente

FYTTER

FYTTER RU-2SX Manuale utente

Precor

Precor 903 Manuale utente

FitLogic

FitLogic freewill d225 Manuale utente

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Manuale utente

Horizon Fitness

Horizon Fitness Adventure 5 Plus Manuale utente

Stamia

Stamia InMotion II Manuale utente

Smooth Fitness

Smooth Fitness EVO 3i Manuale utente

NordicTrack

NordicTrack NETL81810.0 Manuale utente

Schwinn

Schwinn 830/Journey 8.0 Manuale utente

Keys Fitness

Keys Fitness HealthTrainer HT-740T Manuale utente

Spirit

Spirit XT8 Manuale utente

NordicTrack

NordicTrack T 14.0 Treadmill Manuale utente