Life Smart LS099GD Manuale utente
Simply Brilliant
Video Smart Door Lock Model. LS099GD
User Guide V 1.0
Setting up your Video Smart Door Lock
Copyright©2017 Hangzhou LifeSmart Technology Co., Ltd. All rights reserved.
Features
Specifications
Components
Lock Body
01
03
05
07
09
11
14
14
14
16
17
19
21
INSTALLATION
Installation Notice
Installation Instructions
09
14
INSTRUCTION
Initial Use
Keyboard Operation
Unlock / Lock Operation
Finerprint Operation
Password Operation
NFC Operation
Settings
LifeSmart App 25
FAQ & Answers 27
Warranty Description
28
Declaration 29
CONTENTS
INTRODUCTION 01
LifeSmart’s Video Smart Door Lock defines a new generation of door
locks, by innovatively featuring a HD camera built in a bezel-less
design with a stylish finish and an emphasis on ergonomics.
This Video Smart Door Lock is your home guardian, a real time
surveillance device. It is not only built as a standard door lock, but
also a real-time surveillance device. Through the camera on the door
lock, you can monitor a live vision outside your door on your mobile
device anywhere and anytime. It reads your fingerprint, password,
NFC card, key to verify your ID home. The fingerprint scanner is
equipped with leading RF fingerprinting technology to ensure a
higher accuracy and a faster response speed. Connect the smart
door lock with the LifeSmart Smart Home system, it creates more
possibilities to make your home safer and smarter.
1 . Video Call
LifeSmart’s Video Smart Door Lock defines a new generation of door
locks, by innovatively featuring a HD camera built in a bezel-less
design with a stylish finish and an emphasis on ergonomics.
2 . Multiple Ways for Access
You can open your door with fingerprint, password, NFC card, a
traditional key or through LifeSmart App.
3 . Safe Mode
It requires a combination of TWO door open methods (fingerprint,
password or NFC card) to grant the access.
4 . Anti Password Leak Lock Down
If password is entered wrong 10 times, the door lock locks down for
10 minutes automatically.
5 . Brute Force Attack Protection
An alarm will be triggered if the door is broken in by force.
6 . Scramble Pin Code
You can input your correct password in order in any place in the
sequence as long as it’s within 24 characters.
7 . Hostage Alarm
You can pre-set your hostage password. When an abduction
happens, just input your hostage password to inform your family for
help.
8 . Bezel-less Tempered Glass Panel
Touch panel is made of tempered glass and embed within the the
body for durable protection.
01 02
PRODUCT INTRODUCTION
1.1 Features
1.2 Specifications
385 * 75 *33 mm (Handle excluded)
Gold
Zinc Alloy
F.2.5
Fill Flash
≤1%
≤0.001%
6068 Lock Body,
Compatible with TDG Anti-theft Spindles
Fingerprint/Password/NFC card
Emergency Key/LifeSmart App
Size
Color
Material
Lens
Night Vision
False Reject Rate
False Accept Rate
Compatible Lock Body
Ways of Access
255 Fingerprints, 30 Combinations,
255 NFC Cards
RF Fingerprinting Scanner
6~12 Characters
AA Batteries * 8
USB Ported Power
CoSS/Wi-Fi
400m (Open Field)
-30~60℃
20~90%
Storage
Fingerprint Recognition
Password Length
Power
Emergency Power
Radio Type
Radio Range
Operating Temperature
Operating Humidity
03 04
1.3 Components
Release Button
Battery Compartment
Bolt Component
Microphone
Built-in Camera
Fingerprint Scanner
Touchscreen Keypad
NFC Reader
Doorbell
Screen
Latch Bolt
Dead Bolt
Speaker
Keyhole USB Emergency
Power Supply Port
Reset Button
Stop Button
Code Button
05 06
24 * 240 Lock Body (Standard)
30 * 240 Lock Body (Optional)
388 Lock Body (Optional)
Latch Bolt
Square Shaft Port
Dead Bolt
Latch Bolt
Secure Bolt
Secure Bolt
Front Plate
Front Plate
Dead Bolt
Hook Bolt
Hook Bolt
Front Plate
Latch Bolt
Dead Bolt
Secure Bolt
TDG Anti-theft Spindle
TDG Anti-theft Spindle
TDG Anti-theft Spindle
Latch Bolt Reversal Button
Latch Bolt Reversal Button
Latch Bolt Reversal Button
Square Shaft Port
Square Shaft Port
Emergency Key Pin Hole
Emergency Key Pin Hole
Secure Bolt Pin Hole
Emergency Key Pin Hole
Securer Bolt Pin Hole
Securer Bolt Pin Hole
TDG Anti-theft Spindle
TDG Anti-theft Spindle
TDG Anti-theft Spindle
1.4 Lock Body Description
07 08
Oriental Screw
Pull outside to right
1
Outside Outside
Push inside to right
2
2.1 Installation Notice
1 . Change Direction of the Handle
2 . Direction of Opening
3 . Door Thickness and Front Plate Length /Thickness Measurement
Adjust the handle to the position as
the dashed line shows (see right).
Fix the orientation screw.
Twist square hole towards handle
direction until it is fixed.
Same steps are applied to both front
and back panels.
The lock body is compatible for doors with thickness ranged
45mm-55mm. If your door is thicker than 55cm, components will have
to be customized. Please check before installation, and contact your
retailer if the lock body does not fit in.
INSTALLATION
2
3
4
1
Outside Outside
Pull outside to left
3Push inside to left
4
Measuring the
thickness of
the door
ATTENTION
Measuring the
thickness of the
front plate
Measuring the
length of the
front plate
09 10
2.2 Installation Instructions
1 . Drill openings according to the
template, and then place the lock
body into door jamb.
5 . Insert a square strip into the lock body from inside the door
to outside (the longer side of the square strip facing the
front plate and springs inserted both sides of the strip).
6 . Place the cable of the front panel
through the opening and seal the panel.
7 . Separate the back panel and its
cover case (silicone pad and
stainless steel cover).Place cables
from front panel through the matched
openings, then fix the cylinder crews.
8 . Connect cables from front panel to
the right sockets on back panel.
Remove the cover of the battery
compartment, adjust it and tighten fix
4 screws on the panel.
2 . Connect the TDG anti-theft
spindles with the lock body.
(Skip this step if it is a wooden door)
4 . Connect the threaded rod according
to the thickness of your door. Install the
handle in line with the direction of
openings. Use a cross tip screwdriver to
tighten the oriental screw and fasten the
square hole towards handle.
3. Fix 4 screws on the lock body.
The oriental screw is on loose in the lever handle when it is shipped.
Please pull it out from the right handle direction and tighten it accord-
ing to your opening direction.
ATTENTION
11 12
Outside Indoor
Cable
Square Shaft Spring
Lock body
INSTRUCTION
3.1 Initial Use
3.2 Keyboard Operation
3.3 Unlock/Lock Operation
1 . Make sure that the door lock is installed properly and batteries are
already placed in compartment. (AA Battery * 8)
2 . Add two admin accounts to activate at least one unlocking method
(from fingerprint, password and NCF card).
3 . Now the door lock is good to use. You can now authorize more
fingerprints, passwords or NFC card to grant access.
1 . How to Unlock in Semi-Locked State
1 . Slide to activate keyboard, input your password and press # to finish.
2 . Only 2, 8, * and # are lit under Admin Mode. Press 2 to scroll up, 8 to
scroll down, * to go back, # to confirm.
9 . nstall batteries. Close battery
compartment.
10 . Please check the handle from
both sides of the door, stop
button, emergency key and other
components after installation to
confirm the door lock working
properly.
Back
Scroll Up
Scroll Down
Confirm
Semi-Locked State : Only latch bolt is
locked; the lock goes semi-locked
automatically after released in 5
seconds.
13 14
X
3.4 Fingerprint Operation
Please use the traditional metal key only if you’re having an emergency.
ATTENTION
2 . How to Unlock in Full-Locked State
1 . Fingerprint to Unlock
2 . Add a New Fingerprint
3 . Delete User’s Fingerprint
Full-Locked State : latch bolt and dead bolt both locked at the same
time; pull up the handle from outside the door to go full-locked.
Unlock from Inside : Push down the handle to unlock.
Unlock from Outside : It requires fingerprint, password, NFC card or
emergency key to unlock.
3 . How to Unlock in Counter Locked State
Counter Locked State : latch bolt,
dead bolt and stop button all
secured; launch counter lock by
switching the stop button.
Unlock from Inside : switch the
stop button back and push down
the handle to unlock.
Unlock from Outside : you can’t
unlock in any way.
Unlock from Inside : Push down the handle to unlock .
Unlock from Outside : It requires fingerprint, password, NFC card
or emergency key to unlock.
Slide to active keyboard
Press “*” 2 twice
Enter Admin Mode by authorisation
of an Admin’s fingerprint, password
or NFC card
Select “Fingerprint Management”
Select “Add a User”
Select “Empty” (no “*” after a
user’s name)
Follow the voice instructions to
complete the process
2
3
4
5
6
7
1
Slide to active keyboard
Press “*” 2 twice
Enter Admin Mode by authorisa-
tion of an Admin’s fingerprint,
password or NFC card
1
2
3
Select “Fingerprint Management”
Select “Delete a User”
Select the name of the user you
want to delete
Deletion completed
4
5
6
7
Add a User’s Fingerprint
Slide to active keyboard
Press “*” 2 twice
Enter Admin Mode by authorisa-
tion of an Admin’s fingerprint,
password or NFC card
Select “Fingerprint Management”
Select “Add an Admin”
Select “Empty” (no “*” after a
user’s name)
Follow the voice instructions to
complete the process
2
3
4
5
6
7
1
Add an Admin’s Fingerprint
15 16
Indice
Altri manuali Life Smart Serratura della porta
