Lifetime 90180 Manuale utente
Keep this Product ID Number and use when contacting Customer Service:
MODEL N° 90180
OWNER’S MANUAL
For Customer Service in mainland Europe:
E-mail: [email protected]
COPY
2
REGISTER YOUR PRODUCT ONLINE AT WWW.LIFETIME.COM
LIFETIME’S PROMISE TO YOU:
We invite you to read our privacy policy at www.lifetime.com
REGISTER today!
At Lifetime®, we are committed to providing innovative and quality products. While registering, you will have the opportunity to give us your feedback. Your
input is valuable to us.
• You can also opt in to receive new product notifications or promotions.
• In the unlikely event of a product recall or safety modification, your registration provides the information we need to notify you
directly.
• Registration is fast, easy, and completely voluntary.
Maintaining your privacy is our long-standing policy at Lifetime®. And you can rest assured that Lifetime®will not sell or provide
your personal data to other third parties, or allow them to use your personal data for their own purposes.
Save this instruction in the event that the manufacturer has to be contacted for replacement parts.
Most injuries are caused by misuse and/or not following instructions. Use caution when using this system.
To ensure safety, do not attempt to assemble this product without reading and following all instructions carefully. Check the entire
box and inside all packing materials for parts and/or additional instruction material. Before beginning assembly, identify and inventory
all parts and hardware using the parts and hardware lists and identifiers in this document. Proper and complete assembly, use and
supervision are essential for proper orientation and to reduce the risk of accident or injury. A high probability of serious injury exists
if this product is not installed, maintained, and/or operated properly. Failure to comply with any of the warnings in this instruction
manual may result in serious personal injuries such as cuts, broken bones, nerve damage, paralysis, brain injury, or death. Failure to
comply may also result in property damage. Please heed all warnings and cautions.
FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY OR PROPERTY
DAMAGE AND WILL VOID WARRANTY.
• If using a ladder during assembly, use extreme caution.
• At least six capable adults are recommended for this operation.
• Assemble the pole properly. Failure to do so could cause serious injury or property damage.
SAFETY INSTRUCTIONS
**U.S. and Canada customers ONLY**
FOR CUSTOMERS OUTSIDE THE U.S. OR CANADA, PLEASE CONTACT THE STORE FOR ASSISTANCE.
DO NOT CONTACT THE STORE!
CALL OUR CUSTOMER SERVICE DEPARTMENT at 1 (800) 225-3865
HOURS: 7:00 a.m. to 5:00 p.m. Monday through Friday (Mountain Standard Time)
**Call, or visit our Web site for Saturday hours**
Questions or Missing Parts? ID:
TO SAVE TIME WHEN CONTACTING CUSTOMER SERVICE, PLEASE HAVE THE PRODUCT ID AVAILABLE BEFORE YOU CALL; IT’S LOCATED AT THE
BOTTOM-LEFT CORNER OF THE FRONT PAGE OF THIS MANUAL.
INSTRUCTION #1183320 B 2/6/2018
COPY
3
SAFE HANDLING OF THE GLASS BACKBOARD
BEFORE & DURING ASSEMBLY
1. Thoroughly inspect the Backboard before beginning assembly. Do not use the Backboard if there are any chips, cracks,
or other defects in the board. Call our Customer Service Department if any problems are found.
2. Use extreme caution when handling or working around the Backboard.
3. Keep tools, hardware, and other sharp and heavy objects away from the Backboard.
4. Never rest the Backboard directly on a hard surface, such as concrete or pavement. Always place cardboard or other
cushioning material between the Backboard and the ground or other hard surfaces.
5. Always lay the Backboard flat. Never place it in a position where it might tip over and break.
6. Glass is very heavy. Always use at least two adults when picking up or moving the Backboard.
GENERAL HANDLING & CARE
1. Inspect the Backboard before each use. Do not use the Backboard if there are any chips, cracks, or other defects in the
board. If any signs of damage are found, follow the instructions for “Handling Broken Glass” below.
3. Use extreme caution when handling or working around the Backboard.
4. The Backboard was designed for use with a Basketball. Do not use other types of balls or other objects with the system.
Do not use this system for any purpose other than its designed purpose.
HANDLING BROKEN GLASS
At the first sign of breakage:
1. Keep everyone, especially children, away from the immediate area of the Backboard.
2. Put on eye protection, and wear thick utility gloves and long sleeves. Small pieces of tempered glass may pop out of the
Backboard.
3. Lower the Backboard to its lowest height, and completely cover the Backboard with a tarp.
4. Do not remove the Backboard from the system without first lowering the system to its lowest setting. Carefully read and
follow the “Removing Backboard from System” instructions below.
REMOVING BACKBOARD FROM SYSTEM
See Section 7 of this manual for instructions on how to safely remove the backboard from the system.
*Six adults required to
complete assembly*
Only adults should set up the product. Do not allow children
in the setup area until assembly is complete.
COPY
4
BEFORE BEGINNING ASSEMBLY
A. Keep the hardware bags and their contents separate. If any parts are missing, call our Customer
Service Department.
B. Test fit all Bolts by inserting them into their respective holes. If necessary, carefully scrape away any
excess powder coating buildup from inside the holes. Do not scrape away all of the powder coating.
Bare metal may rust. You may need to pound some Bolts into place with a hammer or mallet.
TOOLS AND PARTS REQUIRED FOR THIS ASSEMBLY
*This system comes in 3 boxes.
Do not attempt assembly until all 3 boxes have arrived.*
(1)
3/4”
(1)
Cement
Rubber Mallet
(1)
1/2”
(2)
1/4” Allen Wrench
(1)
9/16”
(2)
3/8” Allen Wrench
(1)
Shovel Carpenter’s Level
(1) (1)
Tape Measure
(1)
Ladder
(2+)
Adjustable Wrench
(1, optional)
Flathead Screwdriver
15/16”
(2)
(1,680 lb / 762 kg)
COPY
This area is located at the top, left-hand
corner of the page and indicates which tools
and hardware are needed to complete the
assembly steps on a page.
This area is located at the top, right-hand
corner of the page and shows an image of the
product with shaded parts indicating which
section is being assembled.
SEC
#
Note:
!
Refer to the following areas throughout the instructions
to assist in the assembly process:
This area is usually located in the bottom,
left-hand corner of a step and indicates that
special attention is needed to perform a
particular part of a step.
These areas are usually located in the bottom,
right-hand corner of a step and indicate that
damage to the product or serious injury may
occur if the caution or warning is not heeded.
Throughout the Parts & Hardware List, Part
& Hardware Identifiers, and instructions
are three-letter IDs. These IDs are below
the images of the parts and hardware to
help you locate and identify the parts and
hardware during assembly. These IDs are not
necessarily on the parts themselves.
WARNING
ASSEMBLY GUIDES
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
CAUTION
ADZ (x10)
1/4” x 5/8” Pan-Head Screw
This area is located at the top, left-hand
corner of the page and indicates which tools
and hardware are needed to complete the
assembly steps on a page.
This area is located at the top, right-hand
corner of the page and shows an image of the
product with shaded parts indicating which
section is being assembled.
SEC
#
Note:
!
Refer to the following areas throughout the instructions
to assist in the assembly process:
This area is usually located in the bottom,
left-hand corner of a step and indicates that
special attention is needed to perform a
particular part of a step.
These areas are usually located in the bottom,
right-hand corner of a step and indicate that
damage to the product or serious injury may
occur if the caution or warning is not heeded.
Throughout the Parts & Hardware List, Part
& Hardware Identifiers, and instructions
are three-letter IDs. These IDs are below
the images of the parts and hardware to
help you locate and identify the parts and
hardware during assembly. These IDs are not
necessarily on the parts themselves.
WARNING
ASSEMBLY GUIDES
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
CAUTION
ADZ (x10)
1/4” x 5/8” Pan-Head Screw
6
HARDWARE LIST
PARTS LIST
ID Item Description Qty
CZA Parts Box 1
ALG Pole 1
AKD Upper Extension Arm 2
AKE Lower Extension Arm Assembly 1
AJR Gas Spring 2
AKG Gas Spring Cover 2
ALS Lifter Arm 2
AEZ 36” Rebar 4
AEI J-Bolt 4
AKT J-Bolt Template 1
CXY Left Cam Plate 1
CXZ Right Cam Plate 1
AMT Warning Sticker (Applied to Pole) 1
ID Item Description Qty
CZB Parts Box 2
AJI Backboard 1
CZC Parts Box 3
ALX Rim 1
AKZ Net 1
AKI Lift Handle 1
AMA Rim Cover Plate 1
CYA Handle Bracket 2
AMO Trigger Pin 1
AKX Handle Lock Bracket 1
ALC Pad Lock with Key (not pictured) 1
AKP Height Sticker 1
ID Item Description Qty
CZD Setup Hardware
AEO 5/8” x 2” Hex Bolt 1
CYV 5/8” Hex Nut Coupler 1
AER 5/8” Hex Nut 8
CZE Handle to Pole Assembly Hardware
CYL 5/16” x 5” Grade 2 Bolt 1
EKW .5” x 8.75” Bolt 3
EKV .625” x 8.875” Bolt 1
CYC 5/8” Large Poly Spacer 2
EKO 1/2” x 1 5/8” Spacer 4
CYQ 5/8” x 1” Spacer 1
EKN 5/8” x .9” Small Spacer 4
AAX 1/2” Centerlock Nut 3
CYN 5/16” Nylock Nut 1
EIP 5/8” Centerlock Nut 1
AEG 1/2” Plastic Washer 2
AEH 5/8” Plastic Washer 2
AJZ Dark Lithium Grease (not pictured) 1
AKH Silicone Grease (White) (not pictured) 1
CZF Extension Arms to Pole Assembly Hardware
CYI 5/8” x 11 1/4” Grade 5 Bolt 2
CYJ 5/8” x 8 1/4” Grade 5 Bolt 1
CYU 1/2” x 3 3/4” Grade 2 Bolt 4
DEF 1/2” x 9” Grade 8 Bolt 1
CYO 5/8” x 4 3/4” Spacer 1
CYQ 5/8” x 1” Spacer 2
CYP 5/8” x 2.9” Rubber Spacer 2
AEG 1/2” Plastic Washer 4
AEH 5/8” Plastic Washer 4
CYM 1/2” x 7/8” Washer 4
CYF 1/2” Grade 2 Nylock Nut 5
CYG 5/8” Grade 2 Nylock Nut 3
ID Item Description Qty
BCR Backboard to Pole Assembly Hardware
CYJ 5/8” x 8 1/4” Grade 5 Bolt 1
CYT 1/2” x 1 1/4” Grade 2 Bolt 2
AEH 5/8” Plastic Washer 2
AEG 1/2” Plastic Washer 6
CYG 5/8” Grade 2 Nylock Nut 1
CYF 1/2” Grade 2 Nylock Nut 2
CZG Pole to J-Bolt Template Assembly Hardware
ADL 5/8” Nylock Nut 4
AMS 5/8” Nylon Cap 4
BIP 5/8” USS Washer 8
CUA 5/8” Lock Washer 4
BCS Rim to Backboard Assembly Hardware
ABY 3/8” x 1 3/4” Hex Bolt 4
ADU M8 x 0.8 Panhead Screw 2
AAF 3/8” Flat Washer 8
AAA 3/8” Nylock Nut 4
7
Parts shown at 10% of Actual Size
PARTS IDENTIFIER
AKZ (x1)
Net
AEZ (x4)
36” Rebar
AKE (x1)
Lower Extension Arm Assembly
AKD (x2)
Upper Extension Arm
ALS (x2)
Lifter Arm
AJR (x2)
Gas Spring
AKG (x2)
Gas Spring Cover
ALX (x1)
Rim Assembly
AMA (x1)
Rim Cover Plate
AKI (x1)
Lift Handle
AKT (x1)
J-Bolt Template
AEI (x4)
J-Bolt
AKP (x1)
Height Sticker
8
Part shown at 25% of Actual Size
CXZ (x1)
Right Cam Plate
CXY (x1)
Left Cam Plate
CYA (x2)
Handle Bracket
ALG (x1)
Pole
AJI (x1)
Backboard
AKX (x1)
Handle Lock Bracket
AMO (x1)
Trigger Pin
Parts shown at 5% of Actual Size
PARTS IDENTIFIER
9
HARDWARE IDENTIFIER
SETUP HARDWARE [CZD]
Hardware shown at Actual Size
HANDLE TO POLE ASSEMBLY HARDWARE [CZE]
Hardware shown at Actual Size
CYV (x1)
5/8” Hex Nut Coupler
AER (x8)
5/8” Hex Nut
AEO (x1)
5/8” x 2” Hex Bolt
CYC (x2)
5/8” Large Poly Spacer
CYL (x1)
5/16” x 5” Grade 2 Bolt
EKO (x4)
1/2” x 1 5/8” Spacer
CYN (x1)
5/16” Nylock Nut
AEG (x2)
1/2” Plastic Washer
CYQ (x1)
5/8” x 1” Spacer
EKN (x4)
5/8” x .9” Spacer
AEH (x2)
5/8” Plastic Washer
(Not actual length)
(Not actual length)
EKV (x1)
.625” x 8.875”Bolt
EKW (x3)
.5” x 8.75”Bolt
8.875”
8.75”
AAX (x3)
1/2” Centerlock Nut
EIP (x1)
5/8” Centerlock Nut
10
HARDWARE IDENTIFIER
EXTENSION ARMS TO POLE ASSEMBLY HARDWARE [CZF]
Hardware shown at Actual Size
(Not actual length)
11 1/4”
CYG (x3)
5/8” Grade 2
Nylock Nut
CYP (x2)
5/8” x 2.9” Rubber Spacer
CYI (x2)
5/8” x 11 1/4” Grade 5 Bolt
CYF (x5)
1/2” Grade 2
Nylock Nut
CYM (x4)
1/2” x 7/8” Washer
CYU (x4)
1/2” x 3 3/4” Grade 2 Bolt
AEH (x4)
5/8” Plastic Washer
CYQ (x2)
5/8” x 1” Spacer
CYO (x1)
5/8” x 4 3/4” Spacer
AEG (x4)
1/2” Plastic Washer
(Not actual length)
9”
DEF (x1)
1/2” x 9” Grade 8 Bolt
CYJ (x1)
5/8” x 8 1/4” Grade 5 Bolt
8 1/4”
(Not actual length)
Indice
Altri manuali Lifetime Accessori
Lifetime
Lifetime QUICK ADJUST 90023 Manuale utente
Lifetime
Lifetime Quick Adjust 1079 Manuale utente
Lifetime
Lifetime Elite 51546 Scheda tecnica
Lifetime
Lifetime 51544 Manuale utente
Lifetime
Lifetime 71559 Manuale utente
Lifetime
Lifetime FREESTANDINGPOWER LIFT 71730 Scheda tecnica
Lifetime
Lifetime 90179 Manuale utente
Lifetime
Lifetime 71523 Manuale utente
Lifetime
Lifetime 90192 Manuale utente
Lifetime
Lifetime 90191 Manuale utente
