Light Sky TX1810 BEAM Manuale utente

USER MANUAL

PROFESSIONAL SHOW LIGHTING

LED

TX1810 BEAM

www.lightsky.com.cn/www.lightsky-china.com

FLY DRAGON LIGHTING EQUIPMENT CO., LTD

AC100~240V 50/60Hz

LIGHT SKY FLY DRAGON LIGHTING EQUIPMENT CO.,LTD

www.lightsky.com.cn

www.lightsky-china.com

CONTENTS

1. General information 2

2. Safety instructions 3

3. Trait and skill specifications 4

4. Operation panel 5

5. Dimensional drawings 6

6. Photometric data 6

7. Mounting and Installation 7

8. Power supply and Signal connection 9

9. Display menu 11

10. DMX traits 20

11. Circuit connecting diagram 25

12. Trouble dispose 26

13. Cleaning and Maintenance 27

14. Duty exonerative and Copyright protection 27

LIGHT SKY FLY DRAGON LIGHTING EQUIPMENT CO.,LTD

www.lightsky.com.cn

www.lightsky-china.com

1. GENERAL INFORMATION

INTRODUCTION: Congratulations, you have just purchased one of the

most innovative and reliable LED fixtures on the market today. Our

company has been designed to perform reliably for years when the

guidelines in this booklet are followed. Please read and understand the

instructions in this manual carefully and thoroughly before attempting to

operate this unit. These instructions contain important information

regarding safety during use and maintenance.

UNPACKING: Thank you for purchasing our company products. Every

product has been thoroughly tested and has been shipped in perfect

operating condition. Carefully check the shipping carton for damage that

may have occurred during shipping. If the carton appears to be damaged,

carefully inspect your fixture for damage and be sure all accessories

necessary to operate the fixture have arrived intact. In the event damage

has been found or parts are missing, please contact our customer support

team for further instructions. Inside the box you should find: the fixture,

a DMX XLR cable, a power cable, and this user manual.

Please do not discard the shipping carton in the trash. Please recycle

whenever possible.

Notice: As part of our ongoing commitment to continuous

products update, company will keep the right to improve

this products, the information in this menu may be

changed in the future, the company reserve the right to

change the data without any advises.

LIGHT SKY FLY DRAGON LIGHTING EQUIPMENT CO.,LTD

www.lightsky.com.cn

www.lightsky-china.com

2. SAFETY INSTRUCTIONS

●1. In order to ensure the light could operate normally, the ambient

temperature couldn't be higher than 38℃ and no lower than- 2℃.

●2. Under normal condition, the highest sectional surface temperature

may be up to 60 ℃.

●3.These projectors are designed depends on the electric shock

protection, the projector should be connected with the power supply

system which connected ground enough. The projector's ground

cable should be connected with the ground cable of the power

supply system as well. The ground mark of the light metal cover

should be connecting with the installation bricked steadily.

●4. Don't use the power cable when the insulation is damaged.

It must be the manufacturer or distributor or the professional person

to change the damaged power cable in order to avoid any

dangerous.

●5.Please check the voltage, frequency data of power supply system is

suitable for the mentioned on the projector. Please do avoid the

different voltage between them and burn the projector.

●6.Do not attempt to operate this fixture if the power cord has become

damaged or frayed.

●7.Never open this fixture while in use.

●8.Never look directly into the light source. You risk injury to your

retina, which may induce blindness.

●9.Please be aware that damages caused by modifications to the device

are not subject to warranty.

Notice: To guarantee proper and consistent operation, it is

important to follow the guidelines in this manual. Our

company will not accept responsibility for damages

resulting from the misuse of this fixture due to the

disregard of the information printed in this manual.

LIGHT SKY FLY DRAGON LIGHTING EQUIPMENT CO.,LTD

www.lightsky.com.cn

www.lightsky-china.com

3. PERFORMANCE TRAIT AND SKILL SPECIFICATIONS

◎ Voltage：AC100~240V 50/60Hz.

◎ Power：264W.

◎ LED chip：10W，RGBW 4 in 1 LED chip.

◎ LED QTY：18PCS.

◎ LED life：50000H.

◎ Lens degree：1.5°.

◎ Beam angle：min.6°,max.60°.

◎ Color: RGBW macro color system.

◎ Strobe：1-30 times/ second electronic strobe and random strobe.

◎ Dimmer：65536 class dimmer.

◎ Pan/Tilt ： Pan ：540° times /2.0 seconds Tilt：180°/1.2 seconds.

◎ Control Mode: DMX512, RDM, Stand-alone mode ,Voice Control

mode , Mater-Slave mode , Wireless DMX512.

◎ Channel: Simple(11CH),Standard(17CH), Extended1(21CH),

Extended2(25CH)

◎ Display Menu:

1. 2.4 inches TFT touch screen, Chinese and English two version

language.

2, Display board can record device’s using time , show device’s

temperature, channel data and software version .

3, Edit the procedure

LIGHT SKY FLY DRAGON LIGHTING EQUIPMENT CO.,LTD

www.lightsky.com.cn

www.lightsky-china.com

◎ Other feature :

1.Extend IP address function , each IP address maximum can set 64

2.Support DMX signal priority identification, when lose the signal

it would be turn into Black , default scene , Automatic function

etc according to your set.

3.Remote control function: control the procedure, speed etc function

by the remote controller when the product under the condition

without signal.

4.Software upgrade : upgrade software by XRL cable.

◎ Outlooking: adopt ABS anti-fire plastic.

◎ Carton size : 412×287×525MM.

◎ N.W.: 8.5KG G.W.: 11.1KG

◎ Light size:322×242×336MM

4. OPERATION PANEL

LIGHT SKY FLY DRAGON LIGHTING EQUIPMENT CO.,LTD

www.lightsky.com.cn

www.lightsky-china.com

5. DIMENSIONAL DRAWINGS

6. PHOTOMETRIC DATA

LIGHT SKY FLY DRAGON LIGHTING EQUIPMENT CO.,LTD

www.lightsky.com.cn

www.lightsky-china.com

7. MOUNTING AND INSTALLATION

Cautions:

For added protection mount the fixtures in areas outside walking

paths, seating areas, and away from areas were unauthorized personnel

might reach the fixture. Before mounting the fixture to any surface, make

sure that the installation area can hold a minimum point load of 10 times

the device's weight. Fixture installation must always be secured with a

secondary safety attachment, such as an appropriate safety cable. To

avoid injury, never stand directly below the device when mounting,

removing, or servicing the fixture.

Mounting points:

Overhead mounting requires extensive experience, including

amongst others calculating working load limits, a fine knowledge of the

installation material being used, and periodic safety inspection of all

installation material and the fixture. If you lack these qualifications, do

not attempt the installation yourself. Improper installation can result in

bodily injury. Be sure to complete all rigging and installation procedures

before connecting the main power cord to the appropriate wall outlet.

Mounting

Our company is fully operational in any mounting position, hanging

upside-down, side mounted, or set on a flat level surface, etc. Be sure this

fixture is kept at least 0.5m (about 1.6feet) away from any flammable

materials (decoration etc.).

When clamp mounting; always use and install the supplied safety

cable as an added safety measure to prevent accidental damage in the

event of a clamp failure. See the image below.

LIGHT SKY FLY DRAGON LIGHTING EQUIPMENT CO.,LTD

www.lightsky.com.cn

www.lightsky-china.com

LIGHT SKY FLY DRAGON LIGHTING EQUIPMENT CO.,LTD

www.lightsky.com.cn

www.lightsky-china.com

8. POWER SUPPLY AND SIGNAL CONNECTION

1. Power supply

Use the professional plug to connect the projector and main power

supply. Please pay attention to the voltage, frequency the same as the

mentioned on the projector. Suggest each light has separately switched of

the power supply so that could turn on or turn off each projector

desultorily.

2. Signal connection

Please use the round 3/5-pin XLR plugs &sockets offered by menu

facture to connect the first projector's output to the second projector'

input and connect the second projector's output to the third device's input.

And in the same way for the rest, eventually connect the last device's

output, all the devices are together as the following figure.

The devices’ control signal output or input by using the 3/5-pin XLR pug

and socket. If need to long then the communication cable, please make

sure the both side of 3/5-pin plug is one to one. (one to one, two to two,

three to three). Otherwise, the communication cable will be interrupted.

The communicate cable is 2-pin shielded cable 75Ω

Resistance with each core is at least a 0.5mm diameter. (Caution: All the

inside leading wire of 3/5-pin XLR plug couldn't touch each other or

plinth).

Recommend to use the DMX signal terminator for the installation to

avoid the electronic noise damage the digital control signal. Simply

Indice

Altri manuali Light Sky Apparecchio di illuminazione

Light Sky

Light Sky PL61W3 Manuale utente

Light Sky

Light Sky MINI LUNAR Manuale utente

Light Sky

Light Sky BUMBLEBEE 2 Series Manuale utente

Light Sky

Light Sky BUMBLEBEE Series Manuale utente

Light Sky

Light Sky IP Aquabeam Series Manuale utente

Light Sky

Light Sky F400LL Manuale utente

Light Sky

Light Sky Tornado Series Manuale utente

Manuali Apparecchio di illuminazione popolari di altre marche

Emos

Emos CLASSIC ZY1431T Manuale utente

Westinghouse

Westinghouse Outdoor Lighting Fixture Manuale utente

Hedler

Hedler C 12 silent Manuale utente

Blizzard Lighting

Blizzard Lighting Puck: CSI Manuale utente

Energetic Lighting

Energetic Lighting ELYSL-5004 Series Manuale utente

Lightmaxx

Lightmaxx Shaft 5R Manuale utente

Triarch

Triarch 31083 Manuale utente

Philips

Philips 32614 Series Manuale utente

IKEA

IKEA TIVED Manuale utente

Lightolier

Lightolier LP200 Manuale utente

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH Manuale utente

Martin

Martin MAC 250 Krypton Manuale utente

Cooper Lighting

Cooper Lighting Halo L3232E Manuale utente

Stageline

Stageline ODW-2410RGBW Manuale utente

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U Manuale utente

Lightolier

Lightolier Lytespan 83ED17S Manuale utente

Lightolier

Lightolier Calculite CS8226 Manuale utente

ArtFox

ArtFox Beam 15R extreme Manuale utente