Lightcloud LCGATEWAY RCL Manuale utente
Welcome
Daylight
LCDAYLIGHT RCL
1 (844) LIGHTCLOUD
WE’RE HERE TO HELP:
Bienvenue!
Lumière du jour
NOUS SOMMES LÀ POUR VOUS AIDER :
®
1 (844) 544-4825
Hello
The Lightcloud Daylight
is a remote, self-powered,
open-loop light sensor
that can switch and dim
Lightcloud Controllers
and other Lightcloud
devices.
Product Features
Wireless Sensing & Configuration
Ambient Light Sensor
Innovative Self-Powered Design
No Batteries
Patent Pending
Contents
Specifications
Lightcloud Daylight Instruction Manual Mounting Screws
Straight & Angled
Mounting Brackets
Power Supply for Setup USB Cable for Setup
PART NUMBER
LCDAYLIGHT RCL
OPERATING TEMPERATURE
-10°C to 40°C
OPERATING HUMIDITY
10% RH to 95% RH
OVERALL DIMENTIONS
5.25” x 3.16” x 1”
USB POWER SPECIFICATIONS
Nominal Input Voltage 100-240VAC
Nominal Input Current 6mA
Nominal Power 0.2W
Frequency 47Hz-63Hz
Indoor Rated
What You Need
Lightcloud Gateway
A Lightcloud installation requires
at least one Lightcloud Gateway to
manage your devices.
Lightcloud Controller
(Or similar Lightcloud actuation device)
The Daylight is designed to remotely
control one or more Lightcloud devices
that are capable of switching or dimming,
such as the Lightcloud Controller or
Ceiling Sensor.
1 (844) LIGHTCLOUD
1 (844) 544-4825
WE’RE HERE TO HELP:
Setup & Installation
Plug in the Daylight device (setup only)
To join Daylight to a Lightcloud network, plug it in with the included
Micro USB power adapter. The white Power Indicator will come on and
the Device Status Indicator will blink red every 10 seconds until it is joined
to your network. For setup purposes, you can plug the device in anywhere
that’s convenient, but please stay near the location where it will be perma-
nently installed in order to ensure continued network connectivity. Once
setup has been completed, you can unplug the device and it will operate
exclusively on solar power—no batteries necessary.
1
2Contact RAB to add your Daylight
and we’ll get your Daylight device added to your Lightcloud network
immediately. When USB power is removed, it is normal for this LED
to be unlit.
DEVICE STATUS INDICATOR
Setup & Installation (cont’d)
3Find a Suitable Location
3a The Daylight needs sunlight to operate, and must be within range
of another Lightcloud device. Direct sunlight is ideal, but indirect
sunlight may be acceptable if there’s enough of it.
Exam ple of
idealplacem ents
Example of
ideal placement
3b A skylight is a great location for the Lightcloud Daylight. Be aware of
where shadows will land throughout the day and position the device
where it will recieve the most direct sunlight.
SKYLIGH T
NOTE: Remember, south-facing surfaces usually receive more direct sunlight
than north-facing surfaces.
SUNLIGHT
Setup & Installation (cont’d)
3c The Daylight includes an angled mouting bracket that can be used
to maximize the amount of sunlight landing on the device’s face.
DIRECT
SUNLIGHT
Use angledbracket to
getmo re directsunlight
USE ANGLED BRACKET TO
GET MORE DIRECT SUNLIGHT
3d In some cases, you may want to use an extension of some kind
(not included) to mount the device from the ceiling. Just be sure
it ends up in direct sunlight as much as possible.
DIRECT
SUNLIGHT
Ma yneed
to use
an
extension
to
obtain directsunlight
!
!
The Daylight must be within range of a Lightcloud device or
Gateway. See “Finding a Location”
The Daylight will not act as a “repeater” to extend the range of
your LIightcloud network. If you need to extend your network
range, use a Lightcloud Controller or other AC-powered device.
May need to use
an extension to
obtain direct sunlight
CEILING
WINDOW
Setup & Installation (cont’d)
Screw the straight or angled
mounting bracket to the
mounting surface.
Snap the Daylight onto
the mounting bracket.
Login at lightcloud.ca and click on Devices to associate a zone
at your site. The application will show the last measured light level
so you can configure actions to take at dierent levels. Or, simply
call or email us:
4Install
4a
4b
5
1 (844) LIGHTCLOUD
1 (844) 544-4825
WE’RE HERE TO HELP:
Functionality
Overview
AMBIENT
LIGHT SENSOR
DEVICE
BUTTON
USB POWER
INDICATOR
DEVICE STATUS
INDICATOR
DEVICE STATUS INDICATOR:
• Unlit: When not powered by USB, indicates that the device is joined to a
Lightcloud network and is operating normally
• Solid green: When powered by USB, indicates that the device is joined to a
Lightcloud network
• Green blink: After pressing the Device Button, indicates that a light level
measurement has been transmitted
• Single red blink every 10 seconds: Not joined to a Lightcloud network
• Green/Red alternating: Resetting to factory defaults
USB POWER INDICATOR:
• White: Powered by USB
DEVICE BUTTON:
• Press: Indicate in Lightcloud application and measure light level
• Hold for 10 seconds while USB powered: Force device to leave current
Lightcloud network
• Hold for 10 seconds while connecting USB power: Reset to factory defaults
and leave current network
DAYLIGHT HARVESTING:
Daylight Harvesting is the use of daylight to oset the use of electric lighting to
light a space. If there’s enough daylight in a space, the Lightcloud Daylight can
make sure the lights are turned down or o, and turn them back on when the sun
goes down.
The Lightcloud Daylight automatically takes light level measurements every 10
minutes. Pressing the Device Button will make an immediate measurement. Call
or email RC, or log in to lightcloud.ca to configure actions to take at dierent
light levels, such as turning o a zone when the light level exceeds 50 foot-candles.
Industry Canada (IC) Compliant Statement
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate
using an antenna of a type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential radio interference to other
users, the antenna type and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than that necessary for suc-
cessful communication.
To comply with Industry Canada RF exposure limits for general population/
controlled exposure, this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or
operating in conjunction with any other antenna or transmitter.
CAUTION: Changes or modifications to this equipment not expressly
approved by RC Lighting may void the user’s authority to operate this
equipment.
Bonjour!
Lightcloud Daylight (de jour)
est un télécollectron à circuit
ouvert qui peut commuter
et régler l’intensité des
commandes Lightcloud et
d’autres dispositifs Lightcloud.
Caractéristiques du produit
Détection et configuration sans fil
Détecteur d’éclairage ambiant
Conception à alimentation propre novatrice
Pas de pile
Brevet en instance
Indice
Lingue:
Manuali Portale popolari di altre marche
LST
LST M500RFE-AS Manuale utente
Kinnex
Kinnex Media Gateway Manuale utente
2N Telekomunikace
2N Telekomunikace 2N StarGate Manuale utente
Mitsubishi Heavy Industries
Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuale utente
ZyXEL Communications
ZyXEL Communications ZYWALL2 ET 2WE Manuale utente
Telsey
Telsey CPVA 500 - SIP Manuale utente
