Lighthouse REMOTE 3104P Manuale utente
00
Lighthouse Worldwide Solutions
REMOTE 3104P, 5104P Airborne Particle Counter
Operating Manual
Copyright © 2008, 2012 by Lighthouse Worldwide Solutions. All rights reserved. No part of this
document may be reproduced by any means except as permitted in writing by Lighthouse
Worldwide Solutions.
The information contained herein constitutes valuable trade secrets of Lighthouse Worldwide
Solutions. You are not permitted to disclose or allow to be disclosed such information except as
permitted in writing by Lighthouse Worldwide Solutions.
The information contained herein is subject to change without notice. Lighthouse Worldwide
Solutions is not responsible for any damages arising out of your use of the LMS program.
REMOTE 3014P™, 5104P™, Elite™ and LMS™ are trademarks of Lighthouse Worldwide
Solutions.
Microsoft
®
, Microsoft Windows™, and Excel™ are trademarks of Microsoft Corporation.
LWS PN 248083336-1 Rev 3
EU DECLARATION OF CONFORMITY
Manufacturer’s Name: Lighthouse Worldwide Solutions, Inc.
Manufacturer’s Address: Lighthouse Worldwide Solutions, Inc.
1221 Disk Drive
Medford, OR 97501 USA
Declares that the product:
Product Name: Remote Airborne Particle Counter
Model Number(s):
REMOTE 3104P and 5104P
Conforms to the following Product Specifications:
SAFETY EN61010-1:2001 Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use Part 1:
General Requirements IEC 61010-1:2000
Safety Requirements for Electrical Equipment for
Measurement, Control and Laboratory Use, Part 1:
General Requirements
LASER SAFETY Guidance on Laser Products: Conforms to FDA 21 CFR
Chapter 1 Subchapter 1
EMC EN61326 Electrical Equipment for Measurement, Control and
Laboratory Use EMC Requirements Part 1: General
Requirements Includes Amendment A1:1998; IEC
61326:1997 + A1:1998
UL 61010A-1 - UL Standard for Safety Electrical Equipment for Laboratory Use; Part 1: General Requirements
Replaces UL 3101-1
Supplementary information
The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC amended by
Directive 93/68/EEC and the EMC Directive 89/336/EEC amended by Directive 93/68/EEC and carries the
CE marking accordingly.
William Shade - V.P. Engineering
Fremont, CA. March 7, 2008
CAN/CSA C22.2
No. 1010.1-1992
IEC 60825-1 Am. 2
IEC 60601-2-22
(Laser Notice 50)
00
248083336-1 Rev 3 t-i
Table of Contents
About this Manual
Text Conventions ................................................................................................................ i
Additional Help ................................................................................................................... i
Chapter 1 General Safety
Laser Safety Information ............................................................................................... 1-1
Sampling Safety ............................................................................................................. 1-2
Chapter 2 Introduction
Overview ........................................................................................................................ 2-1
Description ..................................................................................................................... 2-1
Terms Used .................................................................................................................... 2-2
Accessories .................................................................................................................... 2-2
Annual Calibration ......................................................................................................... 2-2
REMOTE 3104P Specifications .................................................................................... 2-3
REMOTE 5104P Specifications .................................................................................... 2-4
Chapter 3 Getting Started
Initial Inspection ............................................................................................................ 3-1
Shipping Instructions ..................................................................................................... 3-1
Before Power Up ............................................................................................... 3-2
Understanding the LEDs .................................................................................... 3-2
Connections ................................................................................................................... 3-3
Sample Inlet Connection .................................................................................... 3-3
Optional 4-20mA Analog Inputs ....................................................................... 3-4
Optional Analog Sensors ....................................................................... 3-5
Ethernet Communications .................................................................................. 3-6
RS-485 Communications ................................................................................... 3-6
Using the RS-485 Port to Connect to a PC ............................................ 3-8
USB Communications ....................................................................................... 3-9
Using the USB Port to connect to a PC ............................................... 3-10
DIP Switches .................................................................................................... 3-11
Power ............................................................................................................... 3-11
Lighthouse REMOTE 3014P, 5104P Operating Manual
t-ii 248083336-1 Rev 3
Power Switch ................................................................................................... 3-11
Optional Analog Input Ports ............................................................................ 3-11
Remote Display Connector .............................................................................. 3-11
Peripheral Interface Connector .................................................................................... 3-12
Data .............................................................................................................................. 3-12
Chapter 4 Programming
General Information ....................................................................................................... 4-1
DIP Switches .................................................................................................................. 4-1
DIP Switch Settings ....................................................................................................... 4-2
GENERAL DEFINITIONS ............................................................................... 4-2
Communications Mode (DIP #8) ........................................................... 4-2
REMOTE Display Mode (DIP#7) ......................................................... 4-2
Addressing (DIP 1-6) ............................................................................. 4-3
Communicating with the Instrument ............................................................................. 4-4
RS-232 via USB Communications .................................................................... 4-5
RS-485 Port ........................................................................................................ 4-5
RS-485 Communications ................................................................................... 4-5
Configuring with REMOTE Display ............................................................................. 4-5
Configuring with the MODBUS Protocol ..................................................................... 4-5
Setting the Real Time Clock .............................................................................. 4-6
Changing the Default Instrument Parameters .................................................... 4-6
Running the Instrument ................................................................................................. 4-8
MANUAL Counting Mode ................................................................................ 4-9
AUTOMATIC Counting Mode ......................................................................... 4-9
Chapter 5 Maintenance Procedures
Safety ............................................................................................................................. 5-1
Calibration ..................................................................................................................... 5-1
Cleaning ......................................................................................................................... 5-1
Purge Test ...................................................................................................................... 5-1
Chapter 6 Ethernet Installation
Overview ........................................................................................................................ 6-1
Definitions of Terms Used ............................................................................................. 6-2
Preparing for Network Installation ................................................................................ 6-3
Equipment Required: ......................................................................................... 6-3
Software Required: ............................................................................................ 6-3
Additional Requirements: .................................................................................. 6-3
Configure Device ........................................................................................................... 6-4
Ethernet Port Configuration ............................................................................... 6-4
Straight-through Cat5 Setup: ................................................................. 6-4
Table of Contents
248083336-1 Rev 3 t-iii
Cross-over Cat5 Setup: .......................................................................... 6-5
Program the Interface ..................................................................................................... 6-5
Windows Telnet Programming: ......................................................................... 6-5
Connect REMOTE 3104P or 5104P to Ethernet LAN ................................................ 6-11
Connect Ethernet Cable to REMOTE .............................................................. 6-11
Appendix A MODBUS Register Map v1.48, Rx104P
COMM Settings ............................................................................................................ A-1
Supported MODBUS Commands ................................................................................. A-1
Sensor Settings Registers .................................................................................. A-2
Device Status .................................................................................................... A-7
Data Registers ............................................................................................................... A-9
Data Status Byte (30007 - 30008) ................................................................... A-11
Alarm Flags in Channels (30076) ................................................................... A-12
Data Type Registers ........................................................................................ A-12
Data Units Registers ....................................................................................... A-13
Data and Alarm Registers ........................................................................................... A-14
Data and Alarm Enable Registers ................................................................... A-14
Enable Alarming for a Channel ...................................................................... A-16
Threshold Setup Registers .............................................................................. A-17
Setting the Alarm Threshold Value .................................................... A-18
Appendix B Zero Count Test
How to Run the Test ...................................................................................................... B-1
Appendix C Limited Warranty
Limitation Of Warranties: .................................................................................. C-1
Warranty Of Repairs After Initial Two (2) Year Warranty: .............................. C-1
Index
Lighthouse REMOTE 3014P, 5104P Operating Manual
t-iv 248083336-1 Rev 3
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Lighthouse Banco cassa
Lighthouse
Lighthouse Remote 3014PN Manuale utente
Lighthouse
Lighthouse solair 3100 Manuale utente
Lighthouse
Lighthouse NanoCount 30+ Manuale utente
Lighthouse
Lighthouse REMOTE-2 PN Series Manuale utente
Lighthouse
Lighthouse SOLAIR 1001 + Manuale utente
Lighthouse
Lighthouse SOLAIR 3350 Manuale utente
Lighthouse
Lighthouse Handheld 2016 Manuale utente
Lighthouse
Lighthouse RLPC 0.1m Manuale utente
Lighthouse
Lighthouse SOLAIR 2010+ Manuale utente
Lighthouse
Lighthouse RLPC 0.5mm Manuale utente
