Lightmybricks 21321 Manuale utente

Questo manuale è adatto per i seguenti modelli

1

Indice

Altri manuali Lightmybricks Apparecchio di illuminazione

Lightmybricks

Lightmybricks 75257 Manuale utente

Lightmybricks

Lightmybricks The Louvre LED Lighting Kit Manuale utente

Lightmybricks

Lightmybricks 75953 Manuale utente

Lightmybricks

Lightmybricks 21339 Manuale utente

Lightmybricks

Lightmybricks 21322 Manuale utente

Lightmybricks

Lightmybricks LEGO Land Rover Defender 42110 Manuale utente

Lightmybricks

Lightmybricks 75351 Manuale utente

Lightmybricks

Lightmybricks LEGO LAMBORGHINI SIAN FKP 37 42115 Manuale utente

Lightmybricks

Lightmybricks 75257 Manuale utente

Lightmybricks

Lightmybricks 43197 Manuale utente

Lightmybricks

Lightmybricks 21325 Manuale utente

Lightmybricks

Lightmybricks LEGO R2-D2 75308 Manuale utente

Lightmybricks

Lightmybricks 21335 Manuale utente

Lightmybricks

Lightmybricks LEGO UCS IMPERIAL SHUTTLE 10212 Manuale utente

Lightmybricks

Lightmybricks Palace Cinema Manuale utente

Lightmybricks

Lightmybricks 10273 Manuale utente

Lightmybricks

Lightmybricks LEGO Book Shop 10270 Lighting Kit Manuale utente

Lightmybricks

Lightmybricks LEGO NASA Apollo 11 Lunar Lander Manuale utente

Lightmybricks

Lightmybricks 75181 Manuale utente

Manuali Apparecchio di illuminazione popolari di altre marche

Emos

Emos CLASSIC ZY1431T Manuale utente

Westinghouse

Westinghouse Outdoor Lighting Fixture Manuale utente

Hedler

Hedler C 12 silent Manuale utente

Blizzard Lighting

Blizzard Lighting Puck: CSI Manuale utente

Energetic Lighting

Energetic Lighting ELYSL-5004 Series Manuale utente

Lightmaxx

Lightmaxx Shaft 5R Manuale utente

Triarch

Triarch 31083 Manuale utente

Philips

Philips 32614 Series Manuale utente

IKEA

IKEA TIVED Manuale utente

Lightolier

Lightolier LP200 Manuale utente

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH Manuale utente

Martin

Martin MAC 250 Krypton Manuale utente

Cooper Lighting

Cooper Lighting Halo L3232E Manuale utente

Stageline

Stageline ODW-2410RGBW Manuale utente

Light Sky

Light Sky Tornado Series Manuale utente

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U Manuale utente

Lightolier

Lightolier Lytespan 83ED17S Manuale utente

Lightolier

Lightolier Calculite CS8226 Manuale utente

The following page is the instructions for the Light My Bricks International

Space Station (21321) LED light kit.

If you run into any issues, please refer to the online troubleshooting guide.

To ensure a trouble-free installation of your light kit, please read and follow

each step carefully. These instructions can be downloaded in PDF format here

Please note: This page lists instructions for the LED light kit only. If you are

wishing to purchase the Light My Bricks LEGO International Space Station

LIGHT MY BRICKS : LEGO International Space

Station 21321 Lighting Kit

(21321) LED light kit , please click here to view the product page

Package Contents:

9x Cool White 30cm Bit Lights

2x Blue 30cm Bit Light

1x Flashing White 15cm Bit Light

3x White 30cm Micro Bit Lights

1x White Strip Light

3x 6-Port Expansion Board

1x 8-Port Expansion Board

1x Micro 2-4 Port Expansion Board

1x Flicker Effects Board

4x 5cm Connecting Cables

2x 15cm Connecting Cables

1x USB Power Cable

12x Ahdesive Squares

LEGO Pieces:

4x Trans Clear Round Plate 1×1

3x Trans Orange Round Plate 1×1

Important things to note:

Laying cables in between and underneath bricks

Cables can ﬁt in between and underneath LEGO® bricks, plates, and tiles

providing they are laid correctly between the LEGO® studs. Do NOT forcefully

join LEGO® together around cables; instead ensure they are laying comfortably

in between each stud.

CAUTION: Forcing LEGO® to connect over a cable can result in damaging the

cable and light.

Connecting cable connectors to Expansion Boards

Take extra care when inserting connectors to ports of Expansion Boards.

Connectors can be inserted only one way. With the expansion board facing up,

look for the soldered “=” symbol on the left side of the port. The connector side

with the wires exposed should be facing toward the soldered “=” symbol as you

insert into the port. If a plug won’t ﬁt easily into a port connector, do not force it.

Incorrectly inserting the connector can can result in bent pins inside the port

or possible overheating of the expansion board when connected.

Connecting cable connectors to Strip Lights

Take extra care when inserting connectors to ports on the Strip Lights.

Connectors can be inserted only one way. With the Strip Light facing up, ensure

the side of the connector with the wires exposed is facing down. If a plug won’t

ﬁt easily into a port connector, don’t force it. Doing so will damage the plug and

the connector.

Connecting Micro Cable connectors to Micro

Expansion Board Ports

Take extra care when inserting the micro connectors to micro ports of Micro

Expansion Boards. Connecting Micro Bit Lights to Micro Expansion Boards is

similar to connecting lights and cables to Strip Lights. With the expansion

board facing up, ensure the side of the connector with the wires exposed is

facing down. If a plug won’t ﬁt easily into a port connector, do not force it. Use

your ﬁngernail to push the plastic part of the connector to the micro port.

Installing Bit Lights under LEGO® bricks

and plates.

When installing Bit Lights under LEGO® pieces, ensure they are placed the

correct way up (Yellow LED component exposed). You can either place them

directly on top of LEGO® studs or in between.

OK, Let’s Begin!

1.) We will ﬁrst light up the space shuttle. Disconnect and disassemble the three

jet pieces from the shuttle as shown below:

Take out a White 30cm Micro Bit Light and with the LED facing up, place it

inside one of the black rounded bricks. Secure the light by connecting a

provided Trans Orange Round Plate 1×1over the top.

Thread the connector end of the cable through the bottom of the black round

plate with open stud, then reconnect this along with the clip tile to the back as

shown below:

Reconnect this section to the back of the shuttle ensuring the cable is facing

the same way as shown in the below images.

2.) Repeat the previous step to install another 2x White 30cm Micro Bit Lights

to the two other jet sections (using the provided Trans Orange Round Plate 1×1

to secure the lights in place). Reconnect each jet section to the back of the

shuttle with the cable facing the same way.