Lightmybricks 75252 Manuale utente

Please note: This page lists instructions for the LED light kit only.

Package Contents:

34x Cool White 30cm Bit Lights

3x Flashing White 30cm Bit Light

4x Flashing Red 30cm Bit Light

5x Cool White 30cm Large Bit Lights

20x Green 15cm Micro Bit Lights

11x White 30cm Micro Bit Lights

Effects and Expansion Boards

1x Pulse Effects Board

1x Gun Effects Board

1x Multi Effects Board

1x Flicker Effects Board

7x Micro 4-Port Expansion Boards

1x Micro 8-Port Expansion Boards

1x 2-Port Expansion Board

6x 6-Port Expansion Boards

1x 8-Port Expansion Boards

3x 12-Port Expansion Boards

Connecting Cables:

9x 5cm Connecting Cables

6x 15cm Connecting Cables

5x 30cm Connecting Cables

2x 50cm Connecting Cable 1x USB

Power Cable

LEGO Pieces:

28x Trans Clear Round Plate 1×1

4x Trans Light Blue Round Plate 1×1

1x Trans Clear Tile 1×2

1x Trans Black Cone 1×1 with Top Groove

1x Trans Clear Slope 30 1x1x2/3

Important things to note:

Laying cables in between and underneath bricks

Cables can fit in between and underneath LEGO® bricks, plates, and tiles providing they are laid

correctly between the LEGO® studs. Do NOT forcefully join LEGO® together around cables;

instead ensure they are laying comfortably in between each stud.

CAUTION: Forcing LEGO® to connect over a cable can result in damaging the cable and light.

Connecting cable connectors to Expansion Boards

Take extra care when inserting connectors to ports of Expansion Boards. Connectors can be

inserted only one way. With the expansion board facing up, look for the soldered “=” symbol on

the left side of the port. The connector side with the wires exposed should be facing toward the

soldered “=” symbol as you insert into the port. If a plug won’t fit easily into a port connector, do

not force it.

Incorrectly inserting the connector can can result in bent pins inside the port or possible

overheating of the expansion board when connected.

Connecting cable connectors to Strip Lights

Take extra care when inserting connectors to ports on the Strip Lights.

Connectors can be inserted only one way. With the Strip Light facing up, ensure the side of the

connector with the wires exposed is facing down. If a plug won’t fit easily into a port connector,

don’t force it. Doing so will damage the plug and the connector.

Connecting Micro Cable connectors to Micro Expansion Board

Ports

Take extra care when inserting the micro connectors to micro ports of Micro Expansion Boards.

Connecting Micro Bit Lights to Micro Expansion Boards is similar to connecting lights and cables

to Strip Lights. With the expansion board facing up, ensure the side of the connector with the

wires exposed is facing down. If a plug won’t fit easily into a port connector, do not force it. Use

your fingernail to push the plastic part of the connector to the micro port.

Installing Bit Lights under LEGO® bricks and plates.

When installing Bit Lights under LEGO® pieces, ensure they are placed the correct way up (Yellow

LED component exposed). You can either place them directly on top of LEGO® studs or in

between.

OK, Let’s Begin!

1.) Start by disconnecting the following sections from the top of the ship.

Use your LEGO removal tool to disconnect the following pieces to allow us to remove the

two panels that make up the entire left section of the ship.

Indice

Altri manuali Lightmybricks Attrezzatura di illuminazione

Lightmybricks

Lightmybricks LEGO ALPINE LODGE Manuale utente

Lightmybricks

Lightmybricks LEGO STORMTROOPER HELMET LIGHT KIT Manuale utente

Lightmybricks

Lightmybricks 75336 Manuale utente

Lightmybricks

Lightmybricks LEGO HARRY POTTER THE SHRIEKING SHACK & WHOMPING... Manuale utente

Lightmybricks

Lightmybricks 75339 Manuale utente

Lightmybricks

Lightmybricks LEGO AT-TE WALKER 75337 LIGHT KIT Manuale utente

Lightmybricks

Lightmybricks 76408 Manuale utente

Lightmybricks

Lightmybricks LEGO BMW M 1000 RR 42130 Manuale utente

Lightmybricks

Lightmybricks 71016 Manuale utente

Lightmybricks

Lightmybricks LEGO WINTER HOLIDAY TRAIN 10254 Manuale utente

Lightmybricks

Lightmybricks LEGO AVENGERS TOWER Manuale utente

Lightmybricks

Lightmybricks 75349 Manuale utente

Lightmybricks

Lightmybricks 75968 Manuale utente

Lightmybricks

Lightmybricks LEGO JAZZ QUARTET 21344 Manuale utente

Lightmybricks

Lightmybricks LEGO THE MANDALORIAN HELMET 75328 Manuale utente

Lightmybricks

Lightmybricks LEGO Porsche 911 RSR 42096 Lighting Kit Manuale utente

Lightmybricks

Lightmybricks LEGO Hogwarts Castle 71043 Lighting Kit Manuale utente

Lightmybricks

Lightmybricks LEGO Ship In A Bottle 21313 Lighting Kit Manuale utente

Lightmybricks

Lightmybricks Downtown Diner Lighting Kit Manuale utente

Lightmybricks

Lightmybricks 21058 Manuale utente

Lightmybricks

Lightmybricks LEGO Kessel Run Millennium Falcon 75212 Manuale utente

Lightmybricks

Lightmybricks LEGO STAR WARS AT-AT 75288 Manuale utente

Lightmybricks

Lightmybricks 76989 Manuale utente

Lightmybricks

Lightmybricks 76210 Manuale utente

Manuali Attrezzatura di illuminazione popolari di altre marche

Brizo

Brizo 8SP-MU-4 Manuale utente

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuale utente

IKEA

IKEA BJÖRKSPIREA Manuale utente

Laserworld

Laserworld Evolution Series ES-400RGB Manuale utente

Alien

Alien RG STAR Manuale utente

EuroLite

EuroLite LED B-40 Manuale utente

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuale utente

Commercial Electric

Commercial Electric 54568141 Manuale utente

CREE LIGHTING

CREE LIGHTING 304 Series Manuale utente

Goobay

Goobay 49867 Manuale utente

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuale utente

Alkalite

Alkalite Krypton KT-81 Manuale utente

Clas Ohlson

Clas Ohlson GU10 Manuale utente

DTS

DTS DELTA 10 F Manuale utente

ring

ring Solar Steplight Manuale utente

One Stop Gardens

One Stop Gardens 57696 Istruzioni per il montaggio

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuale utente

SIREM

SIREM Swimeo A2 Manuale utente