Lightmybricks Fire Brigade Manuale utente

Light My Bricks : Fire Brigade LED Lighting Kit

Here is the instructions document for the LEGO Fire Brigade LED lighting kit. Please read

and follow the steps carefully to ensure this lighting kit is installed properly.

Package contents:

 1x Lamp Post with 30cm Bit Light installed

 4x White Bit Lights 30cm

 4x White Bit Lights 15cm

 2x White Flashing Bit Lights 15cm

 2x Red Flashing Bit Lights 30cm

 5x LED Strip Lights

 4x 15cm Connecting Cables

 1x 30cm Connecting Cable

 5x Adhesive Squares

 1x 12-port Expansion Board

 1x 8-port Expansion Board

 1x AA Battery Pack (Requires 3x AA Batteries)

 1x Flat Battery Pack (Requires 2x CR2032 Batteries)

Extra LEGO Pieces

 2x LEGO Trans Red 1×1 round bricks

 2x LEGO Light Grey 1L bar with mechanical claw clip

 4x LEGO Plates 1×6 for mounting Strip Lights

Important things to note:

Laying cables in between and underneath bricks

Cables can fit in between and underneath LEGO® bricks, plates, and tiles providing they

are laid correctly between the LEGO® studs. Do NOT forcefully join LEGO® together

around cables; instead ensure they are laying comfortably in between each stud.

CAUTION: Forcing LEGO® to connect over a cable can result in damaging the cable

and light.

Connecting cable connectors to Strip Lights

Take extra care when inserting connectors to ports on the Strip Lights. Connectors can be

inserted only one way. With the Strip Light facing up, ensure the side of the connector

with the wires exposed is facing down. If a plug won’t fit easily into a port connector, don’t

force it. Doing so will damage the plug and the connector.

Connecting cable connectors to Expansion Boards

Take extra care when inserting connectors to ports of Expansion Boards. Connectors can

be inserted only one way. With the expansion board facing up, look for the soldered “=”

symbol on the left side of the port. The connector side with the wires exposed should be

facing toward the soldered “=” symbol as you insert into the port. If a plug won’t fit easily

into a port connector, do not force it.

Incorrectly inserting the connector can result in bent pins inside the port or

possible overheating of the expansion board when connected.

Installing Bit Lights under LEGO® bricks and plates.

When installing Bit Lights under LEGO® pieces, ensure they are placed the correct way

up (Yellow LED component exposed). You can either place them directly on top of

LEGO® studs or in between.

OK, Let’s Begin!

Instructions for installing this kit

This section will guide you to install light to the fire truck first.

1) Start by removing the following pieces to allow us to remove one of the headlight

sections from the front.

Remove the trans yellow round plate and then take one White 15cm Bit Light and thread

the connector side through the front hole of the red brick as per below.

Altri manuali Lightmybricks Attrezzatura di illuminazione

Lightmybricks

Lightmybricks LEGO OBI-WAN KENOBI VS. DARTH VADER Manuale utente

Lightmybricks

Lightmybricks LEGO DC BATCAVE SHADOW BOX 76252 LIGHT KIT Manuale utente

Lightmybricks

Lightmybricks LEGO PARISIAN RESTAURANT 10243 LIGHT KIT Manuale utente

Lightmybricks

Lightmybricks 75954 Manuale utente

Lightmybricks

Lightmybricks 75252 Manuale utente

Lightmybricks

Lightmybricks LEGO CONCORDE Manuale utente

Lightmybricks

Lightmybricks 75322 Manuale utente

Lightmybricks

Lightmybricks 21058 Manuale utente

Lightmybricks

Lightmybricks 75329 Manuale utente

Lightmybricks

Lightmybricks LEGO Old Trafford Manchester United Manuale utente

Lightmybricks

Lightmybricks 76408 Manuale utente

Lightmybricks

Lightmybricks 75325 Manuale utente

Lightmybricks

Lightmybricks 76210 Manuale utente

Lightmybricks

Lightmybricks LEGO Porsche 911 RSR 42096 Lighting Kit Manuale utente

Lightmybricks

Lightmybricks LEGO BOOKSHOP Manuale utente

Lightmybricks

Lightmybricks LEGO Mos Eisley Cantina 75290 Manuale utente

Lightmybricks

Lightmybricks LEGO Winter Village Post Office 10222 Manuale utente

Lightmybricks

Lightmybricks LEGO FERRARI DAYTONA SP3 42143 LIGHT KIT Manuale utente

Lightmybricks

Lightmybricks LEGO Winter Village Fire Station 10263 Lighting... Manuale utente

Lightmybricks

Lightmybricks LEGO Assembly Square 10255 Manuale utente

Lightmybricks

Lightmybricks LEGO JAZZ CLUB 10312 Manuale utente

Lightmybricks

Lightmybricks LEGO Kessel Run Millennium Falcon 75212 Manuale utente

Lightmybricks

Lightmybricks 21338 Manuale utente

Lightmybricks

Lightmybricks 42156 Manuale utente

Manuali Attrezzatura di illuminazione popolari di altre marche

Brizo

Brizo 8SP-MU-4 Manuale utente

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuale utente

IKEA

IKEA BJÖRKSPIREA Manuale utente

Laserworld

Laserworld Evolution Series ES-400RGB Manuale utente

Alien

Alien RG STAR Manuale utente

EuroLite

EuroLite LED B-40 Manuale utente

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuale utente

Commercial Electric

Commercial Electric 54568141 Manuale utente

CREE LIGHTING

CREE LIGHTING 304 Series Manuale utente

Goobay

Goobay 49867 Manuale utente

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuale utente

Alkalite

Alkalite Krypton KT-81 Manuale utente

Clas Ohlson

Clas Ohlson GU10 Manuale utente

DTS

DTS DELTA 10 F Manuale utente

ring

ring Solar Steplight Manuale utente

One Stop Gardens

One Stop Gardens 57696 Istruzioni per il montaggio

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuale utente

SIREM

SIREM Swimeo A2 Manuale utente