Lightolier LyteMode Manuale utente
Lightolier Controls
2828 Trade Center Dr. Ste. 130B
Carrollton, TX 75007
+1-800-526-2731 (In the United States and Canada)
214-647-7880
Fax: 214-647-8032
www.lolcontrols.com
This manual is for informational use only and is subject to change without notice.
Lightolier Controls assumes no responsibility or liability for any claims resulting
from errors or inaccuracies that may appear in this manual.
Version as of: July 16, 2008
Document: P/N: 85-6353A0
Lytemode Classic Digital Keypad User’s Guide
©2008 Philips Group. All Rights Reserved.
Lightolier Controls is a Philips group brand.
Classic Digital Keypad User’s Guide 1
Table of Contents
Customer Service .....................................................................2
Classic Digital Keypads Overview ..........................................3
Quick Start ...............................................................................4
Classic Digital Keypad Configurations ...................................5
Installation ...............................................................................6
Setting ILS Network ID ...........................................................7
Basic Setup ..............................................................................9
Mode .................................................................................9
ID Address ......................................................................11
LED Intensity .................................................................12
Operation ...............................................................................13
Selecting a Scene ............................................................13
Factory Defaults and Troubleshooting ..................................14
Resetting Factory Defaults .............................................14
Troubleshooting ..............................................................15
Specifications ........................................................................16
2Customer Service
Customer Service
Technical and Sales assistance for Lytemode products is available
worldwide.
Phone: +1-800-526-2731 (In the United States and Canada)
+1-214-647-7880 (Worldwide)
Classic Digital Keypad User’s Guide 3
Classic Digital Keypads Overview
Lightolier Controls Classic Digital Keypads offer intuitive user
control of lighting circuits in a broad range of applications.
Classic Digital Keypads are compatible with IntelliSight
Occupancy Sensors, Photocells, and Power Packs, Lyteswitch
Low-Voltage Lighting Control Panels, and Lytemode
Architectural Dimming Systems including Optio and Capio
Plus.
The architecturally neutral appearance and robust construction
provide years of trouble-free service. Field applied labels allow
button descriptions to be easily changed to match the most common
control functions.
Programming of keypads is both fast and simple. Walk-Around-
Programming allows complete setup of a keypad within minutes
without having to remove the device from the wall, or configure
DIP switches or dials.
Backlit buttons feature variable intensity and an audible alert to
provide confirmation and warn occupants of changes to the lighting
levels.
Classic Digital Keypads are available in a variety of button counts,
and are provided white White buttons and a white screwless
faceplate, or with black buttons and a stainless-steel faceplate.
4Quick Start
Quick Start
To get a Classic Digital Keypad up and running quickly, use the
following checklist:
Step 1. Install unit (refer to “Installation” on page 6).
Step 2. Connect to Lytemode ILS Network or ITS Network (refer
to “Setting ILS Network ID” on page 7).
Step 3. Set the mode (refer to “Mode” on page 9).
The unit should now be ready for operation.
Classic Digital Keypad User’s Guide 5
Classic Digital Keypad Configurations
The Classic Digital Keypad is available in the following button
configurations, and may be ordered as either White with a white
screwless faceplate, or Black with a stainless-steel faceplate:
* Standard keypad labeling shown. Each Classic Digital Keypad includes a
sheet of labels featuring common descriptions that may be installed easily
in the field.
ON A
BC
DE
ON
OFF
ON A
BC
DE
FOFF
ON A ON A
BOFF
AB
CD
OFF
ON
OFF OFF
2 BUTTON 3 BUTTON 4 BUTTON
6 BUTTON 7 BUTTON 8 BUTTON
6Installation
Installation
The Lytemode ILS Network consists of a single CAT5e cable
connecting all ILS modules in a daisy chain manner. All units
connect to the network using a 9-pin connector (included).
To install:
Step 1. Unpack unit and inspect for any signs of shipping damage.
Ensure that two mounting screws are included.
Step 2. Connect ILS Network Cable to 9-pin connector at back of
Classic Digital Keypad.
Step 3. Insert unit into single-gang, standard deep box (not
included). Secure with two supplied mounting screws.
1WH/OR(+Data)
2 OR (- Data)
3SHIELD
4WH/GN(+Volts)
5 GN (Ground)
6WH/BL(+Volts)
7 BL (Ground)
8WH/BR(+Volts)
9 BR (Ground)
9-Pin Connector Wiring
PIN SIGNAL
9-Pin
Faceplate
Connector
Classic
Digital Keypad
Single-Gang, Standard
Deep Box (not included)
Classic Digital Keypad User’s Guide 7
Step 4. For white screwless faceplates, snap faceplate into place.
For stainless-steel faceplates, mount using two supplied
screws.
Setting ILS Network ID
Lytemode products are controlled by the Intelligent Lytemode
System (ILS) protocol. All Lytemode ILS devices must be given an
ID (or address), which identifies the device on the network and
allows it to avoid network collisions when transmitting data.
Standard IDs are in the range of 1 to 255. An ID of 0 will disable
the unit and prevent it from transmitting on the network.
IDs are typically unique. For example, an ILS Master will require a
unique ID to allow dimmers to track its channel levels. However,
ILS Remotes should be given the same ID as the ILS Master it
controls. ILS Remotes rely on the fact that they are manually
triggered to avoid network collisions with other ILS Remotes
having the same ID.
The table on the following page provides guidelines for addressing.
8Setting ILS Network ID
ILS Network Addressing:
* Notes:
1 – Matches ILS Master ID.
2 – ILS Masters must be programmed to accept.
3 – Will respond to Remote Polls, Status Requests and Commands.
Note: Refer to the instructions included with your particular
device(s) in order to set corresponding control IDs.
Device ID Sub-ID Devices / ID Remotely
Polled? Notes *
Remote 1-255 0 Multiple No 1
Global Remote 1-255 0 Multiple No 2
Remote Keypad 1-255 0-7 1 Yes 3
IntelliSight (ITS) 1-255 0-7 1 Yes 3
Channel Master 1-255 0-7 1 Yes 3
Indice
