LIGHTSIDE DOUBLE BEAM Manuale utente

1. Specifications

Power Supply:

AC100-240V,50-60Hz

Power Consumption:

60W

LED Source:

2*10W 4IN1 (RGBW) CREE LEDs

Beam Angle:

25°

Dimmer:

0~100% Linear Dimming

Control mode:

DMX 512,Master-slave,Auto run,Sound-activated

DMX Channel:

9/17CH

Rotation Angle:

X 540 degree / Y unlimited rotation

Dimming: 0%-100% linear dimming

Connector:

DMX via 3-pin XLR cable

Date In and out:

3-pin XLR cathode and anode plug

Advantages:

1.Infinite rotation

2.Novelty double sided beam effect

3.Control each side individually

4.LCD display,small size,compact design

Cooling System:

Low noise and efficient fan cooling system

N.W/G.W:

2.5kg/3kg

Dimension:

155*140*230 mm

Outer Packing size:

380*350*300mm(4pcs/CNS)

2. SAFETY INTRODUCTION

• If the device has been exposed to temperature changes due to environmental changes,

do not switch it on immediately. The arising condensation could damage the device.

Leave the device switched off until it has reached room temperature.

• It is essential that the device is earthed. A qualified person must carry out the electric

connection.

• Make sure that the available voltage is not higher than stated at the end of this manual.

• Make sure the power cord is never crimped or damaged. If it is damaged, ask your

dealer or authorized agent to replace the power cord.

• Always disconnect from the mains, when the device is not in use or before cleaning it.

Only handle the power cord by plug. Never pull out the plug by tugging the power cord.

• DISCONNECT DEVICE: Where the MAINS plug or an appliance coupler is used

as the disconnect device, the disconnect device shall remain readily operable.

• Due to the magnifying type lens, please keep the lens out of contact with direct us.

Direct we can cause heat to build up inside of the unit, which will seriously damage

unit.

CAUTION:

1. Be very careful during installation. Since you will be working with a dangerous

voltage you can suffer a life-threatening electric shock when touching live wired.

2. Never look directly into the light source, as sensitive persons may suffer an

shock.

3. Please be aware that damages caused by manual modifications to the device are not

subject to warranty. Keep away from children and non-professionals.

4. The light doesn’t include any spare parts for repair, please check if all the parts are

well installed and screws are fitted tightly before operating. Do not use the light when

the cover is open.

GENERAL GUIDELINES

• This device is only allowed to be operated with an alternating current of max.

220-240VAC/50-60Hz and was designed for indoor use only.

• Do not shake the device. Avoid brute force when installing or operating it.

• Operate the device only after having familiarized yourself with its functions. Do not

permit operation by person not qualified for operating the device. Most damages are

the result of unprofessional operation.

• Please use the original packaging if the device is to be transported.

• For safety reasons, please be aware that all modifications on the device are

forbidden. Furthermore, any other operation may lead to short-circuit, burns, electric

shock, lamp explosion, crash, etc. If this device will be operated in any way different

to the one described in this manual, the product may suffer damages and the guarantee

becomes void.

3. Operation

1.Illustration Part

：

A.Menu

A B C D B.Up

C.Down

D.Enter

Operating Instructions: Press button A

“

”

to choose different functions ，

Press button “B” or “C” to amend parameter values, Press button “D” to“Enter”

LCD display different functions:（Press button“Enter” to enter）

NO. Display Function

ADDR

A001-A512 address settings

CHND

9CH, 17CH channel selection

SLND

MAST, SLAVE selection

4 SHND

Select SOUD, AUTO(SP0

—

SP9) control

5 SOUD

ON,OFF switch of sound

control

6 SENS

Sensitivity of sound control(0

closed, 100 is most sensitive)

7 BLND

YES, NO; the switch of

standby

8 LED

YES, NO; the switch of Back

light

DISP

YES, NO; reverse display

PAN

YES, NO; level motor reverse

11 TILT

YES,NO; vertical motor

reverse

12 MANU

PAN, TILT, COLOR,

GOBO,DIMM,

STROB,Manual testing

TEST

Automatic testing

14 HOUR

0 ---- 9999 time of use

machine

15 VER

V101 software version

number

16 RSET

YES, NO reset factory

settings

4. DMX512 Channels:

Mode 1: 9 Channels

No Functions Illustration

0-255

X motor operation

0-255

Y motor operation

Dimming

0-255 1-100%

Red Dimming

—

255 0-----100%

Green Dimming

—

255 0-----100%

Blue Dimming

—

255 0-----100%

White Dimming

—

255 0-----100%

Strobe

0-15 open light, 16-131 strobe

from slow to fast , 132-139

open light, 140-181 fast off,

slowly open, 182-189 open

light, 190-231 slow off, quick

open, 232-239 open light,

240-247 random strobe light,

248-255 open light.

Marco

0-69 no functional, 70-89

Close light effective when the

horizontal or vertical motor

moves, 90-109 close light

invalid when X or Y axis

moving, 110-129 close light

effectively when the color

wheel move , 130-149 invalid

to close light when the color

wheel move , 150-169 close

light effectively when Gobo

move. 170-189 close light

invalidly when Gobo move,

190-199 no functional,

200-209 overall reset,

210-249 no functional,

250-255 sound control effect

nonfunctional, 200-209

overall reset, 210-249 free

function, 250-255 random

sound control effect

Mode 2:17 Channels

No Data Illustration

0-255

The level of motor

travel,0

-------540

0-255

The level of motor tuning

0-255

Vertical Motor:

0-127, 360-degree stroke

positioning;

128-191, forward rotation

from fast to slow;

192 --- 255 reverse rotation

from slow to fast.

0-255

Vertical Motor trimming: 0

---- 255 (CH3 value is valid

when 0 --- 127)

Marco

0-69 non-functional, 70-89

when the horizontal or

vertical motor motor moves

off the light and effective,

90-109 when moving off light

invalid X or Y axis, 110-129

when the color wheel to move

off the light effectively,

130-149 when the color wheel

to move off the light invalid,

150-169 Gobo move off when

the light effectively, 170-189

Gobo move off when the light

is invalid, 190-199

nonfunctional, 200-209

overall reset, 210-249 free

function, 250-255 random

sound control effect

0-255

dimming

Strobe

0-7 close light, 8-15

opening,16-131 strobe from

slow to fast , 132-139 open

light, fast off slowly open

140-181, 182-189 opening,

190-231 slow off quick

opening, 232-239 opening,

240-247 random strobe,

248-255 opening

Red Dimming 1

—

255 0-----100%

Green Dimming 1

—

255 0-----100%

Blue Dimming 1

—

255 0-----100%

White Dimming 1

—

255 0-----100%

Red Dimming 2

—

255 0-----100%

Green Dimming 2

—

255 0-----100%

Blue Dimming 2

—

255 0-----100%

White Dimming 2

—

255 0-----100%

Self-run color

0 --- 7 No function; 8 --- 127

fixed color:15 kinds; 128 ---

191 color transitions; 192 ---

255 color gradient

Self-run Speed of Color

0 --- 255 from slow to fast

Motor fine-tuning operations:

Press the Menu key "MENU", enter the menu, press the Enter key

"ENTER" for at least 3 seconds or more, the menu screen displays "Pan

(X-axis motor tuning)", by plus or minus keys to select "Tilt (Y-axis

motor tuning) "press the ENTER button in the steering motor position

value range -127 ---- 127,finally, press the ENTER button to save trim

value what you have set.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali LIGHTSIDE Attrezzatura per DJ

LIGHTSIDE

LIGHTSIDE LS 125 Manuale utente

LIGHTSIDE

LIGHTSIDE LED MINI BEAM Manuale utente

LIGHTSIDE

LIGHTSIDE NANO PAR Manuale utente

LIGHTSIDE

LIGHTSIDE LED SPOT RGBW Manuale utente

LIGHTSIDE

LIGHTSIDE SLIM PAR Q7 Manuale utente

LIGHTSIDE

LIGHTSIDE Mirror Ball Set 20 Manuale utente

LIGHTSIDE

LIGHTSIDE MINI WASH Q4 Manuale utente

LIGHTSIDE

LIGHTSIDE LED MINI BEAM MK2 Manuale utente

Manuali Attrezzatura per DJ popolari di altre marche

ALPHA LITE

ALPHA LITE ALPHA 1500 Manuale del proprietario

Chauvet

Chauvet OVATION E-930VW Manuale utente

Zumtobel

Zumtobel APHRODITE Home Manuale utente

Snow Masters

Snow Masters Zig Oscillator Manuale utente

EuroLite

EuroLite 50530554 Manuale utente

Beamz

Beamz BUV243 Manuale utente

thomann

thomann Stairville DJ Lase 40-G MK-III Manuale utente

Eagletone

Eagletone 6 Eyes Flower Manuale utente

EuroLite

EuroLite FLD-1508 Manuale utente

Technical Pro

Technical Pro LG8xSEA Manuale utente

JB Systems

JB Systems Lounge Laser DMX Manuale utente

Lightmaxx

Lightmaxx Vega Halo 90 Manuale utente

Elation

Elation FUZE WASH Z350 Manuale utente

Maverick

Maverick MK3 WASH Manuale utente

Infinity

Infinity TF-260C7 Fresnel Manuale utente

Chauvet

Chauvet EVE E-50Z Manuale utente

Eliminator Lighting

Eliminator Lighting E 138 Manuale utente

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manuale utente