Lightspeed GPRS-100S Manuale utente
Quick Guide for GPRS PCMCIA modem
Install Mobile Phone Tool.
Click Setup, Mobile Phone Tool will install automatically.
Select the modem you have installed.
If BV P can not detect modem correctly, please click on Menu, Configuration,
Change Configuration, Change Modem, then select the correct modem you have installed.
You also can open Exchange dialog box to view how to control GP S modem.
If you have any question, please contact
GPRS-100S Modem Installation ithout using BVRP soft are.
To install the GP S-100S as a modem, you need the MDM_LSMO1XX.inf file. This file exists on CD’s
sub-directory “ Driver” section.
Double-click the "Modems" icon in the "Control panel"
Start - Settings -Control - Modems
Click Add to install the driver Check the control box "Don't detect my modem,I ill select
it from a list" and click the "Next" button. Click on Have Disc to select an external driver
from CD. Enter the drive and folder the MDM_LSMO1XX.inf file is stored in. You can select GPRS
Modem for PCMCIA modem.
With the "Browse" button you can search the file, should you be uncertain as to where you stored it.
Choose the inf file. Then Open. Check if you have selected the right driver. Then Next
Choose the serial interface e.g.COM1 .your mobile is connected to.
Click on Next Finish the installation.
Now the modem has been successfully installed
Ho to Connect to Internet?
Usually you can use Dialing Netwook to dial
“ *99# ” or “ *99***1#”
to connect to Internet. Please check with your ISP,
this may be different in varies ISP.
Ho to use Windo s generic PCMCIA modem driver?
You also can use Windows generic standard PCMCIA modem as driver.
For Windows XP, plug GP S PC card in to PCMCIA slot. XP will auto-detect it is a standard PCMCIA modem.
Click “Yes” and “Next”, XP will auto-install PCMCIA driver.
Ho to use HyperTerminal to control GPRS modem?
Please open HyperTerminal, select correct COM port. choose correct DTE speed to match
speed you use for driver. Type in “ATI3” for modem ID. If it response “MO1XX”, then modem is
connected. You can use GP S AT command set to control this modem.
If there is any question, you are welcome to contact Peter Chen at peter@lightspeed.com.tw
Hard are
a. ANT (sho n on housing): Antenna for GSM net ork
The antenna has fix by horizontal ay on unit.
b. SIM : It is for inserting SIM card.
c. Earphone : It is for plugging earphone cable for voice communication.
d. NET: When unit connects to cellular service station, LED illstart blinking.
e. PWR: When po er is provided. This card needs 5VDC po er.
FCC INFORMATION
The Federal Communication Commission Radio Frequency Interference Statement includes the
follo ing paragraph:
The equipment has been tested and found to comply ith the limits for a Class B Digital Device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance ith
the instruction, may cause harmful interference to radio communication. Ho ever, there is no
grantee that interference ill not occur in a particular installation. If this equipment dose cause
harmful interference to radio or television reception, hich can be determined by turning the
equipment off and on , the user is encouraged to try to correct the interference by one or more
of the follo ing measures:
--Reorient or relocate the receiving antenna.
--Increase the separation bet een the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to hich the receiver is
connected.
--Consult the dealer or an experienced radio/TV technician for help.
The changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
To comply ith the FCC RF exposure compliance requirements, this device and its antenna
must not be co-located or operating to conjunction ith any other antenna or transmitter.
This device complies ith Part 15 of the FCC Rules. Operation is subject to the follo ing t o
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Indice
Altri manuali Lightspeed Modem
