LIMITLESS DigiClock LIM-DCLK Manuale utente

WHAT’S INCLUDED

• (1) DigiClock

• (1) 36” Type-C to USB Cable

• (1) USB Wall Adapter

• (1) CR2016 Coin Battery (Installed)

• (1) User Manual

DigiClock ™, and Limitless™ are trademarks of

Limitless Innovations, Inc. Design and

speciﬁcations subject to change without

notice. Products may vary from images shown.

Accessories sold separately.

LimitlessInnovations.com

Support@LimitlessInnovations.com

(855) 843-4828

Limitless Innovations, Inc.

4800 Metalmaster Way

McHenry, IL 60050

SAFETY INFORMATION WARNINGS

By using the DigiClock, you hereby

agree that Limitless Innovations, Inc.,

an Illinois corporation and its aliates

(“Limitless”) shall have no liability for

any losses associated with property

damage, personal injury or loss of life

that are incurred by you or by any third

party in connection with or relating in

any manner whatsoever to your use of

the DigiClock. By using the DigiClock,

you hereby agree at all times to comply

fully with all safety warnings, operating

instructions and general safety

information in this user manual. By

using the DigiClock, you further agree

to hold harmless Limitless, (and

Limitless’ ocers, directors, shareholders

and employees) in connection with any

losses sustained by you (including,

without limitation, losses arising in

whole or in part from property damage,

personal injury or loss of life) relating in

any manner whatsoever to your use of

the DigiClock.

• The DigiClock is NOT a toy and

should be kept away from children.

• Do NOT use the DigiClock near a

magnetic or electric ﬁeld.

• Do NOT use the DigiClock in

direct sunlight or extreme heat

for extended periods of time.

• Do NOT use the DigiClock if it has

been damaged and/or modiﬁed.

• Do NOT subject the DigiClock to

harsh chemicals.

• Do NOT submerge the DigiClock

or its accessories in water.

• Do NOT store the DigiClock

where temperatures will exceed

140° F (60° C).

• Do NOT insert any foreign objects

into the openings or port of the

DigiClock.

• Do NOT charge the DigiClock in

high humidity conditions.

• Do NOT attempt to disassemble,

repair, or open the DigiClock or its

accessories in any way.

• Do NOT paint or apply coatings to

the DigiClock as you might aect

moving parts or damage internal

components.

• Batteries should be recycled or

disposed of, as per state and local

guidelines.

To view the complete

user manual, please visit:

LimitlessInnovations.com/DigiClock

DigiClock™

Quick Start Guide

TECH SPECS

Model: LIM-DCLK-XXX

2x USB Output: 5V/2A (Max)

Type-C Input: 5V/2A

Size: 6.22” x 3.07” x 0.51”

Weight: 0.23 lb

WHAT’S INCLUDED

• (1) DigiClock

• (1) 36” Type-C to USB Cable

• (1) USB Wall Adapter

• (1) CR2016 Coin Battery (Installed)

• (1) User Manual

DigiClock ™, and Limitless™ are trademarks of

Limitless Innovations, Inc. Design and

speciﬁcations subject to change without

notice. Products may vary from images shown.

Accessories sold separately.

LimitlessInnovations.com

Support@LimitlessInnovations.com

(855) 843-4828

Limitless Innovations, Inc.

4800 Metalmaster Way

McHenry, IL 60050

SAFETY INFORMATION WARNINGS

By using the DigiClock, you hereby

agree that Limitless Innovations, Inc.,

an Illinois corporation and its aliates

(“Limitless”) shall have no liability for

any losses associated with property

damage, personal injury or loss of life

that are incurred by you or by any third

party in connection with or relating in

any manner whatsoever to your use of

the DigiClock. By using the DigiClock,

you hereby agree at all times to comply

fully with all safety warnings, operating

instructions and general safety

information in this user manual. By

using the DigiClock, you further agree

to hold harmless Limitless, (and

Limitless’ ocers, directors, shareholders

and employees) in connection with any

losses sustained by you (including,

without limitation, losses arising in

whole or in part from property damage,

personal injury or loss of life) relating in

any manner whatsoever to your use of

the DigiClock.

• The DigiClock is NOT a toy and

should be kept away from children.

• Do NOT use the DigiClock near a

magnetic or electric ﬁeld.

• Do NOT use the DigiClock in

direct sunlight or extreme heat

for extended periods of time.

• Do NOT use the DigiClock if it has

been damaged and/or modiﬁed.

• Do NOT subject the DigiClock to

harsh chemicals.

• Do NOT submerge the DigiClock

or its accessories in water.

• Do NOT store the DigiClock

where temperatures will exceed

140° F (60° C).

• Do NOT insert any foreign objects

into the openings or port of the

DigiClock.

• Do NOT charge the DigiClock in

high humidity conditions.

• Do NOT attempt to disassemble,

repair, or open the DigiClock or its

accessories in any way.

• Do NOT paint or apply coatings to

the DigiClock as you might aect

moving parts or damage internal

components.

• Batteries should be recycled or

disposed of, as per state and local

guidelines.

To view the complete

user manual, please visit:

LimitlessInnovations.com/DigiClock

DigiClock™

Quick Start Guide

TECH SPECS

Model: LIM-DCLK-XXX

2x USB Output: 5V/2A (Max)

Type-C Input: 5V/2A

Size: 6.22” x 3.07” x 0.51”

Weight: 0.23 lb

WHAT’S INCLUDED

• (1) DigiClock

• (1) 36” Type-C to USB Cable

• (1) USB Wall Adapter

• (1) CR2016 Coin Battery (Installed)

• (1) User Manual

DigiClock ™, and Limitless™ are trademarks of

Limitless Innovations, Inc. Design and

speciﬁcations subject to change without

notice. Products may vary from images shown.

Accessories sold separately.

LimitlessInnovations.com

Support@LimitlessInnovations.com

(855) 843-4828

Limitless Innovations, Inc.

4800 Metalmaster Way

McHenry, IL 60050

SAFETY INFORMATION WARNINGS

By using the DigiClock, you hereby

agree that Limitless Innovations, Inc.,

an Illinois corporation and its aliates

(“Limitless”) shall have no liability for

any losses associated with property

damage, personal injury or loss of life

that are incurred by you or by any third

party in connection with or relating in

any manner whatsoever to your use of

the DigiClock. By using the DigiClock,

you hereby agree at all times to comply

fully with all safety warnings, operating

instructions and general safety

information in this user manual. By

using the DigiClock, you further agree

to hold harmless Limitless, (and

Limitless’ ocers, directors, shareholders

and employees) in connection with any

losses sustained by you (including,

without limitation, losses arising in

whole or in part from property damage,

personal injury or loss of life) relating in

any manner whatsoever to your use of

the DigiClock.

• The DigiClock is NOT a toy and

should be kept away from children.

• Do NOT use the DigiClock near a

magnetic or electric ﬁeld.

• Do NOT use the DigiClock in

direct sunlight or extreme heat

for extended periods of time.

• Do NOT use the DigiClock if it has

been damaged and/or modiﬁed.

• Do NOT subject the DigiClock to

harsh chemicals.

• Do NOT submerge the DigiClock

or its accessories in water.

• Do NOT store the DigiClock

where temperatures will exceed

140° F (60° C).

• Do NOT insert any foreign objects

into the openings or port of the

DigiClock.

• Do NOT charge the DigiClock in

high humidity conditions.

• Do NOT attempt to disassemble,

repair, or open the DigiClock or its

accessories in any way.

• Do NOT paint or apply coatings to

the DigiClock as you might aect

moving parts or damage internal

components.

• Batteries should be recycled or

disposed of, as per state and local

guidelines.

To view the complete

user manual, please visit:

LimitlessInnovations.com/DigiClock

DigiClock™

Quick Start Guide

TECH SPECS

Model: LIM-DCLK-XXX

2x USB Output: 5V/2A (Max)

Type-C Input: 5V/2A

Size: 6.22” x 3.07” x 0.51”

Weight: 0.23 lb

WHAT’S INCLUDED

• (1) DigiClock

• (1) 36” Type-C to USB Cable

• (1) USB Wall Adapter

• (1) CR2016 Coin Battery (Installed)

• (1) User Manual

DigiClock ™, and Limitless™ are trademarks of

Limitless Innovations, Inc. Design and

speciﬁcations subject to change without

notice. Products may vary from images shown.

Accessories sold separately.

LimitlessInnovations.com

Support@LimitlessInnovations.com

(855) 843-4828

Limitless Innovations, Inc.

4800 Metalmaster Way

McHenry, IL 60050

SAFETY INFORMATION WARNINGS

By using the DigiClock, you hereby

agree that Limitless Innovations, Inc.,

an Illinois corporation and its aliates

(“Limitless”) shall have no liability for

any losses associated with property

damage, personal injury or loss of life

that are incurred by you or by any third

party in connection with or relating in

any manner whatsoever to your use of

the DigiClock. By using the DigiClock,

you hereby agree at all times to comply

fully with all safety warnings, operating

instructions and general safety

information in this user manual. By

using the DigiClock, you further agree

to hold harmless Limitless, (and

Limitless’ ocers, directors, shareholders

and employees) in connection with any

losses sustained by you (including,

without limitation, losses arising in

whole or in part from property damage,

personal injury or loss of life) relating in

any manner whatsoever to your use of

the DigiClock.

• The DigiClock is NOT a toy and

should be kept away from children.

• Do NOT use the DigiClock near a

magnetic or electric ﬁeld.

• Do NOT use the DigiClock in

direct sunlight or extreme heat

for extended periods of time.

• Do NOT use the DigiClock if it has

been damaged and/or modiﬁed.

• Do NOT subject the DigiClock to

harsh chemicals.

• Do NOT submerge the DigiClock

or its accessories in water.

• Do NOT store the DigiClock

where temperatures will exceed

140° F (60° C).

• Do NOT insert any foreign objects

into the openings or port of the

DigiClock.

• Do NOT charge the DigiClock in

high humidity conditions.

• Do NOT attempt to disassemble,

repair, or open the DigiClock or its

accessories in any way.

• Do NOT paint or apply coatings to

the DigiClock as you might aect

moving parts or damage internal

components.

• Batteries should be recycled or

disposed of, as per state and local

guidelines.

To view the complete

user manual, please visit:

LimitlessInnovations.com/DigiClock

DigiClock™

Quick Start Guide

TECH SPECS

Model: LIM-DCLK-XXX

2x USB Output: 5V/2A (Max)

Type-C Input: 5V/2A

Size: 6.22” x 3.07” x 0.51”

Weight: 0.23 lb

WHAT’S INCLUDED

• (1) DigiClock

• (1) 36” Type-C to USB Cable

• (1) USB Wall Adapter

• (1) CR2016 Coin Battery (Installed)

• (1) User Manual

DigiClock ™, and Limitless™ are trademarks of

Limitless Innovations, Inc. Design and

speciﬁcations subject to change without

notice. Products may vary from images shown.

Accessories sold separately.

LimitlessInnovations.com

Support@LimitlessInnovations.com

(855) 843-4828

Limitless Innovations, Inc.

4800 Metalmaster Way

McHenry, IL 60050

SAFETY INFORMATION WARNINGS

By using the DigiClock, you hereby

agree that Limitless Innovations, Inc.,

an Illinois corporation and its aliates

(“Limitless”) shall have no liability for

any losses associated with property

damage, personal injury or loss of life

that are incurred by you or by any third

party in connection with or relating in

any manner whatsoever to your use of

the DigiClock. By using the DigiClock,

you hereby agree at all times to comply

fully with all safety warnings, operating

instructions and general safety

information in this user manual. By

using the DigiClock, you further agree

to hold harmless Limitless, (and

Limitless’ ocers, directors, shareholders

and employees) in connection with any

losses sustained by you (including,

without limitation, losses arising in

whole or in part from property damage,

personal injury or loss of life) relating in

any manner whatsoever to your use of

the DigiClock.

• The DigiClock is NOT a toy and

should be kept away from children.

• Do NOT use the DigiClock near a

magnetic or electric ﬁeld.

• Do NOT use the DigiClock in

direct sunlight or extreme heat

for extended periods of time.

• Do NOT use the DigiClock if it has

been damaged and/or modiﬁed.

• Do NOT subject the DigiClock to

harsh chemicals.

• Do NOT submerge the DigiClock

or its accessories in water.

• Do NOT store the DigiClock

where temperatures will exceed

140° F (60° C).

• Do NOT insert any foreign objects

into the openings or port of the

DigiClock.

• Do NOT charge the DigiClock in

high humidity conditions.

• Do NOT attempt to disassemble,

repair, or open the DigiClock or its

accessories in any way.

• Do NOT paint or apply coatings to

the DigiClock as you might aect

moving parts or damage internal

components.

• Batteries should be recycled or

disposed of, as per state and local

guidelines.

To view the complete

user manual, please visit:

LimitlessInnovations.com/DigiClock

DigiClock™

Quick Start Guide

TECH SPECS

Model: LIM-DCLK-XXX

2x USB Output: 5V/2A (Max)

Type-C Input: 5V/2A

Size: 6.22” x 3.07” x 0.51”

Weight: 0.23 lb

HOW TO USECONTROL PANEL

Setting the Clock:

1. Press and hold the Mode Button for 2

seconds to enter the time setting mode.

2. Use the Plus (+) and Minus (-) Buttons

to adjust the values and the Mode (M)

Button to switch to the next sequence.

Time Setting Sequence:

Setting & Using the Alarm:

1. Press the Minus (-) Button to turn the

Alarm on/o. You should see the “AL”

Alarm Indicator on the Digital Display

when the Alarm is activated.

2. With the alarm turned on, click the

Mode (M) Button to view the current

alarm time setting.

3. Press and hold the Mode (M) Button for

2 seconds to enter the alarm time

setting mode.

4. Use the Plus (+) and Minus (-) Buttons

to adjust the values and the Mode (M)

Button to switch to the next sequence.

Alarm Time Setting Sequence:

Turning O the Alarm

The alarm will ring for 2 minutes before

the automatic shut-o triggers.

1. Snooze the Alarm

a. Press the Snooze Button to

enter the Snooze mode. The

“AL” Alarm Indicator will blink.

b. Press the Mode (M), Plus (+), or

Minus (-) Button to turn o

Snooze mode.

2. Press the Mode (M), Plus (+), or

Minus (-) Button to turn o the

alarm.

COMPONENTS

Mirrored Digital Display

“AL” Alarm Indicator

12-Hour PM Indicator

Light Sensor

Mode Button (M)

Plus Button (+)

Minus Button (-)

Snooze Button

Keyhole

Backup Battery Slot

Removable Base

USB Output 1

USB Output 2

Type-C Input

Adjusting the Brightness:

Click the Plus (+) Button to adjust

the brightness.

Brightness Levels:

Light Sensitivity Function:

There is a built-in light sensor that can

automatically adjust the brightness of the

Digital Display based on the environment.

Press and hold the Plus (+) Button to turn

this feature on/o.

Night Mode:

This feature will automatically adjust

the brightness of the Digital Display

to the Dark brightness level at the

programmed time.

1. Double click the Mode Button to enter

the Night Mode selection.

2. Press the Plus (+) or Minus (-) Button to

turn the Night Mode on/o.

3. With Night Mode turned on, press and

hold the Mode (M) Button to enter the

Night Mode time setting.

4. Use the Plus (+) and Minus (-) Buttons

to adjust the values and the Mode (M)

Button to switch to the next sequence.

Night Mode Time Setting Sequence:

NOTE: The Light Sensitivity Function and

Night Mode cannot be used at the same

time.

Charging a Mobile Device:

Plug a USB cable into one of the USB-A

Outputs & into a device. The device will

begin to charge.

Backup Battery:

The CR2016 Coin Battery is pre-installed

in the Backup Battery Slot to enable the

alarm-save in case of a power outage.

10.

11.

12.

13.

14.

MSingle Click:

Check Alarm Time

Double Click:

Night Mode

Press & Hold (2 Seconds):

Enter Time Setting Mode

+Single Click:

Adjust the Brightness

Press & Hold:

Turn On/O Light Sensitivity Mode

In Time Setting Mode:

Single Click:

Increase the Value By 1

Press & Hold:

Increase the Value 8 / Second

–Single Click:

Turn On/O the Alarm

In Time Setting Mode:

Single Click:

Decrease the Value By 1

Press & Hold:

Decrease the Value 8 / Second

Hours Minutes Snooze Duration

24-Hour 12-Hour Hours Minutes

Bright Medium Dark

PMAL

Start Hour Start Minute End Hour End Minute

HOW TO USECONTROL PANEL

Setting the Clock:

1. Press and hold the Mode Button for 2

seconds to enter the time setting mode.

2. Use the Plus (+) and Minus (-) Buttons

to adjust the values and the Mode (M)

Button to switch to the next sequence.

Time Setting Sequence:

Setting & Using the Alarm:

1. Press the Minus (-) Button to turn the

Alarm on/o. You should see the “AL”

Alarm Indicator on the Digital Display

when the Alarm is activated.

2. With the alarm turned on, click the

Mode (M) Button to view the current

alarm time setting.

3. Press and hold the Mode (M) Button for

2 seconds to enter the alarm time

setting mode.

4. Use the Plus (+) and Minus (-) Buttons

to adjust the values and the Mode (M)

Button to switch to the next sequence.

Alarm Time Setting Sequence:

Turning O the Alarm

The alarm will ring for 2 minutes before

the automatic shut-o triggers.

1. Snooze the Alarm

a. Press the Snooze Button to

enter the Snooze mode. The

“AL” Alarm Indicator will blink.

b. Press the Mode (M), Plus (+), or

Minus (-) Button to turn o

Snooze mode.

2. Press the Mode (M), Plus (+), or

Minus (-) Button to turn o the

alarm.

COMPONENTS

Mirrored Digital Display

“AL” Alarm Indicator

12-Hour PM Indicator

Light Sensor

Mode Button (M)

Plus Button (+)

Minus Button (-)

Snooze Button

Keyhole

Backup Battery Slot

Removable Base

USB Output 1

USB Output 2

Type-C Input

Adjusting the Brightness:

Click the Plus (+) Button to adjust

the brightness.

Brightness Levels:

Light Sensitivity Function:

There is a built-in light sensor that can

automatically adjust the brightness of the

Digital Display based on the environment.

Press and hold the Plus (+) Button to turn

this feature on/o.

Night Mode:

This feature will automatically adjust

the brightness of the Digital Display

to the Dark brightness level at the

programmed time.

1. Double click the Mode Button to enter

the Night Mode selection.

2. Press the Plus (+) or Minus (-) Button to

turn the Night Mode on/o.

3. With Night Mode turned on, press and

hold the Mode (M) Button to enter the

Night Mode time setting.

4. Use the Plus (+) and Minus (-) Buttons

to adjust the values and the Mode (M)

Button to switch to the next sequence.

Night Mode Time Setting Sequence:

NOTE: The Light Sensitivity Function and

Night Mode cannot be used at the same

time.

Charging a Mobile Device:

Plug a USB cable into one of the USB-A

Outputs & into a device. The device will

begin to charge.

Backup Battery:

The CR2016 Coin Battery is pre-installed

in the Backup Battery Slot to enable the

alarm-save in case of a power outage.

10.

11.

12.

13.

14.

MSingle Click:

Check Alarm Time

Double Click:

Night Mode

Press & Hold (2 Seconds):

Enter Time Setting Mode

+Single Click:

Adjust the Brightness

Press & Hold:

Turn On/O Light Sensitivity Mode

In Time Setting Mode:

Single Click:

Increase the Value By 1

Press & Hold:

Increase the Value 8 / Second

–Single Click:

Turn On/O the Alarm

In Time Setting Mode:

Single Click:

Decrease the Value By 1

Press & Hold:

Decrease the Value 8 / Second

Hours Minutes Snooze Duration

24-Hour 12-Hour Hours Minutes

Bright Medium Dark

PMAL

Start Hour Start Minute End Hour End Minute

HOW TO USECONTROL PANEL

Setting the Clock:

1. Press and hold the Mode Button for 2

seconds to enter the time setting mode.

2. Use the Plus (+) and Minus (-) Buttons

to adjust the values and the Mode (M)

Button to switch to the next sequence.

Time Setting Sequence:

Setting & Using the Alarm:

1. Press the Minus (-) Button to turn the

Alarm on/o. You should see the “AL”

Alarm Indicator on the Digital Display

when the Alarm is activated.

2. With the alarm turned on, click the

Mode (M) Button to view the current

alarm time setting.

3. Press and hold the Mode (M) Button for

2 seconds to enter the alarm time

setting mode.

4. Use the Plus (+) and Minus (-) Buttons

to adjust the values and the Mode (M)

Button to switch to the next sequence.

Alarm Time Setting Sequence:

Turning O the Alarm

The alarm will ring for 2 minutes before

the automatic shut-o triggers.

1. Snooze the Alarm

a. Press the Snooze Button to

enter the Snooze mode. The

“AL” Alarm Indicator will blink.

b. Press the Mode (M), Plus (+), or

Minus (-) Button to turn o

Snooze mode.

2. Press the Mode (M), Plus (+), or

Minus (-) Button to turn o the

alarm.

COMPONENTS

Mirrored Digital Display

“AL” Alarm Indicator

12-Hour PM Indicator

Light Sensor

Mode Button (M)

Plus Button (+)

Minus Button (-)

Snooze Button

Keyhole

Backup Battery Slot

Removable Base

USB Output 1

USB Output 2

Type-C Input

Adjusting the Brightness:

Click the Plus (+) Button to adjust

the brightness.

Brightness Levels:

Light Sensitivity Function:

There is a built-in light sensor that can

automatically adjust the brightness of the

Digital Display based on the environment.

Press and hold the Plus (+) Button to turn

this feature on/o.

Night Mode:

This feature will automatically adjust

the brightness of the Digital Display

to the Dark brightness level at the

programmed time.

1. Double click the Mode Button to enter

the Night Mode selection.

2. Press the Plus (+) or Minus (-) Button to

turn the Night Mode on/o.

3. With Night Mode turned on, press and

hold the Mode (M) Button to enter the

Night Mode time setting.

4. Use the Plus (+) and Minus (-) Buttons

to adjust the values and the Mode (M)

Button to switch to the next sequence.

Night Mode Time Setting Sequence:

NOTE: The Light Sensitivity Function and

Night Mode cannot be used at the same

time.

Charging a Mobile Device:

Plug a USB cable into one of the USB-A

Outputs & into a device. The device will

begin to charge.

Backup Battery:

The CR2016 Coin Battery is pre-installed

in the Backup Battery Slot to enable the

alarm-save in case of a power outage.

10.

11.

12.

13.

14.

MSingle Click:

Check Alarm Time

Double Click:

Night Mode

Press & Hold (2 Seconds):

Enter Time Setting Mode

+Single Click:

Adjust the Brightness

Press & Hold:

Turn On/O Light Sensitivity Mode

In Time Setting Mode:

Single Click:

Increase the Value By 1

Press & Hold:

Increase the Value 8 / Second

–Single Click:

Turn On/O the Alarm

In Time Setting Mode:

Single Click:

Decrease the Value By 1

Press & Hold:

Decrease the Value 8 / Second

Hours Minutes Snooze Duration

24-Hour 12-Hour Hours Minutes

Bright Medium Dark

PMAL

Start Hour Start Minute End Hour End Minute

HOW TO USECONTROL PANEL

Setting the Clock:

1. Press and hold the Mode Button for 2

seconds to enter the time setting mode.

2. Use the Plus (+) and Minus (-) Buttons

to adjust the values and the Mode (M)

Button to switch to the next sequence.

Time Setting Sequence:

Setting & Using the Alarm:

1. Press the Minus (-) Button to turn the

Alarm on/o. You should see the “AL”

Alarm Indicator on the Digital Display

when the Alarm is activated.

2. With the alarm turned on, click the

Mode (M) Button to view the current

alarm time setting.

3. Press and hold the Mode (M) Button for

2 seconds to enter the alarm time

setting mode.

4. Use the Plus (+) and Minus (-) Buttons

to adjust the values and the Mode (M)

Button to switch to the next sequence.

Alarm Time Setting Sequence:

Turning O the Alarm

The alarm will ring for 2 minutes before

the automatic shut-o triggers.

1. Snooze the Alarm

a. Press the Snooze Button to

enter the Snooze mode. The

“AL” Alarm Indicator will blink.

b. Press the Mode (M), Plus (+), or

Minus (-) Button to turn o

Snooze mode.

2. Press the Mode (M), Plus (+), or

Minus (-) Button to turn o the

alarm.

COMPONENTS

Mirrored Digital Display

“AL” Alarm Indicator

12-Hour PM Indicator

Light Sensor

Mode Button (M)

Plus Button (+)

Minus Button (-)

Snooze Button

Keyhole

Backup Battery Slot

Removable Base

USB Output 1

USB Output 2

Type-C Input

Adjusting the Brightness:

Click the Plus (+) Button to adjust

the brightness.

Brightness Levels:

Light Sensitivity Function:

There is a built-in light sensor that can

automatically adjust the brightness of the

Digital Display based on the environment.

Press and hold the Plus (+) Button to turn

this feature on/o.

Night Mode:

This feature will automatically adjust

the brightness of the Digital Display

to the Dark brightness level at the

programmed time.

1. Double click the Mode Button to enter

the Night Mode selection.

2. Press the Plus (+) or Minus (-) Button to

turn the Night Mode on/o.

3. With Night Mode turned on, press and

hold the Mode (M) Button to enter the

Night Mode time setting.

4. Use the Plus (+) and Minus (-) Buttons

to adjust the values and the Mode (M)

Button to switch to the next sequence.

Night Mode Time Setting Sequence:

NOTE: The Light Sensitivity Function and

Night Mode cannot be used at the same

time.

Charging a Mobile Device:

Plug a USB cable into one of the USB-A

Outputs & into a device. The device will

begin to charge.

Backup Battery:

The CR2016 Coin Battery is pre-installed

in the Backup Battery Slot to enable the

alarm-save in case of a power outage.

10.

11.

12.

13.

14.

MSingle Click:

Check Alarm Time

Double Click:

Night Mode

Press & Hold (2 Seconds):

Enter Time Setting Mode

+Single Click:

Adjust the Brightness

Press & Hold:

Turn On/O Light Sensitivity Mode

In Time Setting Mode:

Single Click:

Increase the Value By 1

Press & Hold:

Increase the Value 8 / Second

–Single Click:

Turn On/O the Alarm

In Time Setting Mode:

Single Click:

Decrease the Value By 1

Press & Hold:

Decrease the Value 8 / Second

Hours Minutes Snooze Duration

24-Hour 12-Hour Hours Minutes

Bright Medium Dark

PMAL

Start Hour Start Minute End Hour End Minute

HOW TO USECONTROL PANEL

Setting the Clock:

1. Press and hold the Mode Button for 2

seconds to enter the time setting mode.

2. Use the Plus (+) and Minus (-) Buttons

to adjust the values and the Mode (M)

Button to switch to the next sequence.

Time Setting Sequence:

Setting & Using the Alarm:

1. Press the Minus (-) Button to turn the

Alarm on/o. You should see the “AL”

Alarm Indicator on the Digital Display

when the Alarm is activated.

2. With the alarm turned on, click the

Mode (M) Button to view the current

alarm time setting.

3. Press and hold the Mode (M) Button for

2 seconds to enter the alarm time

setting mode.

4. Use the Plus (+) and Minus (-) Buttons

to adjust the values and the Mode (M)

Button to switch to the next sequence.

Alarm Time Setting Sequence:

Turning O the Alarm

The alarm will ring for 2 minutes before

the automatic shut-o triggers.

1. Snooze the Alarm

a. Press the Snooze Button to

enter the Snooze mode. The

“AL” Alarm Indicator will blink.

b. Press the Mode (M), Plus (+), or

Minus (-) Button to turn o

Snooze mode.

2. Press the Mode (M), Plus (+), or

Minus (-) Button to turn o the

alarm.

COMPONENTS

Mirrored Digital Display

“AL” Alarm Indicator

12-Hour PM Indicator

Light Sensor

Mode Button (M)

Plus Button (+)

Minus Button (-)

Snooze Button

Keyhole

Backup Battery Slot

Removable Base

USB Output 1

USB Output 2

Type-C Input

Adjusting the Brightness:

Click the Plus (+) Button to adjust

the brightness.

Brightness Levels:

Light Sensitivity Function:

There is a built-in light sensor that can

automatically adjust the brightness of the

Digital Display based on the environment.

Press and hold the Plus (+) Button to turn

this feature on/o.

Night Mode:

This feature will automatically adjust

the brightness of the Digital Display

to the Dark brightness level at the

programmed time.

1. Double click the Mode Button to enter

the Night Mode selection.

2. Press the Plus (+) or Minus (-) Button to

turn the Night Mode on/o.

3. With Night Mode turned on, press and

hold the Mode (M) Button to enter the

Night Mode time setting.

4. Use the Plus (+) and Minus (-) Buttons

to adjust the values and the Mode (M)

Button to switch to the next sequence.

Night Mode Time Setting Sequence:

NOTE: The Light Sensitivity Function and

Night Mode cannot be used at the same

time.

Charging a Mobile Device:

Plug a USB cable into one of the USB-A

Outputs & into a device. The device will

begin to charge.

Backup Battery:

The CR2016 Coin Battery is pre-installed

in the Backup Battery Slot to enable the

alarm-save in case of a power outage.

10.

11.

12.

13.

14.

MSingle Click:

Check Alarm Time

Double Click:

Night Mode

Press & Hold (2 Seconds):

Enter Time Setting Mode

+Single Click:

Adjust the Brightness

Press & Hold:

Turn On/O Light Sensitivity Mode

In Time Setting Mode:

Single Click:

Increase the Value By 1

Press & Hold:

Increase the Value 8 / Second

–Single Click:

Turn On/O the Alarm

In Time Setting Mode:

Single Click:

Decrease the Value By 1

Press & Hold:

Decrease the Value 8 / Second

Hours Minutes Snooze Duration

24-Hour 12-Hour Hours Minutes

Bright Medium Dark

PMAL

Start Hour Start Minute End Hour End Minute

Indice

Altri manuali LIMITLESS Sveglia

LIMITLESS

LIMITLESS PowerTrio Manuale utente

Manuali Sveglia popolari di altre marche

Steren

Steren CLK-210 Manuale utente

COP-USA

COP-USA ALCDVR32-SL Manuale utente

Philips

Philips HF3505/70 Manuale tecnico

Casio

Casio PQ-70 Manuale utente

iHome

iHome IA63 Manuale utente

Coopers

Coopers 9765 Manuale utente

ANJANK

ANJANK AC-190 Guida

TFA

TFA 98.1075 Manuale utente

Sharper Image

Sharper Image 204050 Manuale utente

Lumie

Lumie Zest Manuale utente

Dexford

Dexford RCT200 Manuale utente

Philips

Philips AJL303/37B Manuale utente

RST

RST Q754 Manuale utente

iHome

iHome iKT50 Manuale utente

Sony

Sony dash HID-B7 Manuale utente

SVINZ

SVINZ SCC009 Manuale utente

Clas Ohlson

Clas Ohlson 918863 Manuale utente

IKEA

IKEA FNURRA Manuale utente