Linak DESKLINE DL1A Manuale utente

Page 1 of 24

LINAK.COM/DESKLINE

DL1A and CBD4, CBD5, CBD6 system

User manual

Page 2 of 24

Contents

Preface ............................................................................................................................................. 3

Important information .................................................................................................................... 4

Safety instructions........................................................................................................................... 4

Before installation, re-installation or troubleshooting............................................................... 5

Before start-up................................................................................................................................. 5

During operation.............................................................................................................................. 5

Repairs ............................................................................................................................................. 7

Manufacturer’s declaration............................................................................................................. 7

Misc. on the DESKLINE®DL1A system........................................................................................... 8

Warranty............................................................................................................................................ 8

Maintenance..................................................................................................................................... 8

Description of the DESKLINE® DL1A system ................................................................................. 9

Mounting guidelines for the DESKLINE®DL1A .................................................................................... 10

Mounting guidelines CBD4/CBD5/CBD6 ............................................................................................. 12

Electrical connection of the DL1A system ............................................................................................ 13

Initialisation of the DESKLINE®DL1A parallel systems ......................................................................... 14

Accessories and repair .................................................................................................................. 15

Disposal of LINAK’s products........................................................................................................ 16

Labels ........................................................................................................................................... 17

Drawing appendix.......................................................................................................................... 18

Declaration of Conformity ............................................................................................................ 20

Addresses........................................................................................................................................ 24

Page 3 of 24

Preface

Dear User,

We are delighted that you have chosen a product from LINAK®.

LINAK systems are high-tech products based on many years of experience in the manufacture and development

of actuators, electric control boxes, controls and chargers.

This User Manual does not address the end-user. It is intended as a source of information for the manufacturer

of the equipment or system only, and it will tell you how to install, use and maintain your LINAK electronics. It

is the responsibility of the manufacturer of the end-use product to provide a User Manual where relevant safety

information from this manual is passed on to the end-user.

We are sure that your LINAK product will give you many years of problem-free operation.

Before our products leave the factory they undergo full function and quality testing. Should you nevertheless

experience problems with your systems, you are always welcome to contact your local dealer.

LINAK subsidiaries and some distributors situated all over the world have authorised service centres, which are

always ready to help you.

LINAK provides a warranty on all its products. This warranty, however, is subject to correct use in accordance

with the speciﬁcations, maintenance being done correctly and any repairs being carried out at a service centre,

which is authorised to repair LINAK products.

Changes in installation and use of LINAK systems can affect their operation and durability. The products are not

to be opened by unauthorised personnel.

The User Manual has been written based on of our present technical knowledge. We are constantly working on

updating the information and we therefore reserve the right to carry out technical modiﬁcations.

LINAK A/S

Page 4 of 24

Safety instruction

General

Important information

Important information on LINAK®products can be found under the following

headings:

Warning!

Failure to comply with these instructions may result in accidents involving

serious personal injury.

Failing to follow these instructions can result in the product being damaged

or being destroyed.

Safe use of the system is possible only when the operating instructions are read

completely and the instructions contained are strictly observed.

Failure to comply with instructions marked with the ”NOTE” symbol may result in

serious damage to the system or one of its components.

It is important for everyone who is to connect, install, or use the systems to

have the necessary information and access to this User Manual. Follow the

instructions for mounting – risk of injury if these instructions are not followed.

The appliance is not intended for use by young children or inﬁrm persons

without supervision.

If there is visible damage on the product it must not be installed.

Note that during construction of applications, in which the actuator is to

be fitted, there must be no possibility of personal injury, for example the

squeezing of fingers or arms.

Assure free space for movement of application in both directions to avoid

blockade.

Page 5 of 24

Before installation, re-installation, or troubleshooting:

• Stop the DL1A

• Switch off the power supply and pull out the mains plug.

• Relieve the DL1A of any loads, which may be released during the work.

Before start-up:

• Make sure that the system has been installed as instructed in this User Manual.

• Make sure that the voltage of the control box is correct before the system is

connected to the mains.

• System connection. The individual parts must be connected before the control box

is connected to the mains. See the User Manual for LINAK actuators, if necessary.

During operation

• If the control box makes unusual noises or smells, switch off the mains voltage

immediately.

• Take care that the cables are not damaged.

• Unplug the mains cable on mobile equipment before it is moved.

• The products must only be used in an environment, that corresponds to their IP

protection.

Misc.

The actuator system has a sound level below 55dB(A) in typical applications.

Updated manuals and declarations can always be found here:

www.linak.com/deskline

Page 6 of 24

Only for EU markets

This appliance can be used by children aged from 8 years and above and

persons with reduced physical, sensory or mental capabilities or lack of

experience and knowledge if they have given supervision or instruction

concerning use of the appliance in a safe way and understand the hazards

involved.

Children shall not play with the appliance. Cleaning and user maintenance

shall not be made by children without supervision.

Only for Non EU markets

Persons who do not have the necessary experience or knowledge of the

product/products must not use the product/products. Besides, persons with

reduced physical, sensory or mental abilities must not use the product/

products, unless they are under surveillance or they have been thoroughly

instructed in the use of the apparatus by a person who is responsible for the

safety of these persons.

Moreover, children must be under surveillance to ensure that they do not

play with the product.

It is the operator’s responsibility to ensure that there is free space for the

application to move without risk for the operator or bystanders before

operating the application.

Misuse

Do not overload the actuators – this can cause danger of personal injury and

damage to the system.

Do not use the actuator system for lifting persons. Do not sit or stand on a

table while operating – risk of personal injury.

Do not use the system in environments other than the intended indoor use

Page 7 of 24

Repairs

In order to avoid the risk of malfunction, all DESKLINE®repairs must only be carried out by authorised LINAK workshops or

repairers, as special tools must be used and special gaskets must be ﬁtted. Lifting units under warranty must also be returned

to authorised LINAK workshops.

Warning!

If any of the DESKLINE®products are opened, there will be a risk of subsequent malfunction.

Warning!

The DESKLINE®systems do not withstand cutting oil.

DECLARATION OF INCORPORATION OF PARTLY COMPLETED MACHINERY

LINAK A/S

Smedevænget 8

DK -6430 Nordborg

Herewith declares that LINAK DESKLINE®products as characterized by the following models and types:

Control Boxes CBD6S

Linear ActuatorsDB5, DB6, DB7, DB9, DB12, DB14, DB16, LA23, LA31

Lifting ColumnsDL1A, DL2, DL4S, DL5, DL6, DL7, DL8, DL9, DL10, DL11, DL12, DL14, DL15,

DL16,DL17, DL19, BASE1

Desk PanelsDPA, DPB, DPH, DPF, DPG1K, DPG1M, DPG1B, DPG1C, DPT, DP1, DP1CS,

DP1K, DP1V, DP1U

RF ControlsHB10RF,HB20RF, RFT, RFRL

Accessories BA001, SLS, Kick & Click

comply with the following parts of the Machinery Directive 2006/42/EC,ANNEX I,Essential health and

safety requirements relating to the design and construction of machinery:

1.5.1 Electricity supply

The relevant technical documentation is compiled in accordance with part B of Annex VII and that this

documentation or part hereof will be transmitted by post or electronically to a reasoned request by the

national authorities.

This partly completed machinery must not be put into service until the final machinery into

which it is to be incorporated has been declared in conformity with the provisions of the

Machinery Directive 2006/42/EC where appropriate.

Nordborg, 2017-12-08

LINAK A/S

John Kling, B.Sc.E.E.

Certification and Regulatory Affairs

Authorized to compile the relevant technical documentation

Original Declaration

Page 8 of 24

Misc. on the DESKLINE®DL1A system

This system is a DESKLINE system developed for desks and for indoor use in ofﬁces. Do not use it in industrial kitchens or in

other enviroments that have to be cleaned with aggressive detergents.

Do not bolt the legs to the ﬂoor so that free movement is prevented. This could cause serious damage to the legs in fault

situations.

Warranty

There is a 36 months’ warranty on the DESKLINE products against manufacturing faults from the production date of the

individual products (see label).

LINAK A/S’ warranty is only valid in so far as the equipment has been used and maintained correctly and has not been

tampered with. Furthermore, the system must not be exposed to violent treatment. In the event of this, the warranty will be

ineffective/invalid. For further details, please see LINAK A/S ordinary conditions of sale.

Maintenance

Clean dust and dirt on the outside of the system at appropriate intervals and inspect them for damage and breaks.

Inspect the connections, cables, and plugs and check for correct functioning as well as ﬁxing points.

Service of double-insulated products:

Class II

A Class II or double insulated electrical appliance is one which has been designed in such a way that it does not require a

safety connection to electrical earth (US: ground).

The basic requirement is that no single failure can result in dangerous voltage becoming exposed so that it might cause an

electric shock and that this is achieved without relying on an earthed metal casing. This is usually achieved at least in part by

having two layers of insulating material surrounding live parts or by using reinforced insulation.

There is no earthing/grounding means provided on the product, and no earthing/grounding means is to be added to the

product.

In Europe, a double insulated appliance must be labelled “Class II”, “double insulated” or bear the double insulation symbol

(a square inside another square).

Servicing a double-insulated product requires extreme care and knowledge of the system, and is to be done only by qualiﬁed

service personnel. Replacement parts for a double-insulated product must be identical to the parts they replace.

The cleaners and disinfectants must not be highly alkaline or acidic (pH value 6-8).

Page 9 of 24

Description of the DESKLINE®DL1A system

Each DESKLINE®DL1A actuator is equipped with a motor and parallel/memory drive is ensured by means of software in the

CBD4/CBD5/CBD6 that also takes account of oblique load on the desk. Soft start and stop are also part of this software, which

ensures a soft start and stop when adjusting the desk.

The DESKLINE®DL1A system range contains the following products:

• 1 control box CBD4/CBD5/CBD6

• 1 single DL1A or 2, 3, or 4 parallel

• 1 exchangeable mains cable

• 1, 2, 3, or 4 motor cables

• 1 DP1U/DPF1M (if memory function is required) DP1C/WDPL/DPT/DPF1C (if memory function and display is required) or 1

DPA/DPB/DP1K/DP1V/DPF1K (if only up/down is required.)

Options:

• Possibility of running extra actuators (LA31 with hall)

Application of the DESKLINE®DL1A system:

Irrespective of the load the duty cycle 10% ~ 6 min./ hour or max. 2 min. at continuous use stated in the data sheets,

must NOT be exceeded as this will result in a superheating of the motor, the brake and the spindle nut. Exceeding the duty

cycle will result in a dramatic reduction of the life of the system.

Maximum load for each DL1A: 1600 N

Maximum load for a system with CBD4 400 W: 3200 N

Maximum load for a system with CBD4 600 W: 4800 N

Maximum load for a system with CBD5 500 W: 3200 N

Maximum load for a system with CBD6 375 W: 2400 N

Page 10 of 24

Tabletop

Absorbing

material

Height of the DL1 in the lowest position

Min. desk height

Floor level

Mounting guidelines for the DESKLINE DL1A

Figure 2

Figure 1

The lifting units are normally mounted with the motor housings upwards and pointing towards each other

(see ﬁgure 2).

The aluminium motor housing is supplied with 6 pcs. of M6 threaded holes meant for mounting on the desk frame.

The threaded holes are rolled into the aluminium housing.

It is recommended to use all 6 M6 threaded holes. As the tabletop ampliﬁes the sound we advise you to place a

vibration/shockabsorbing material between the tabletop and the table frame.

A suitable desk height in the lowest position can be obtained by mounting the lifting unit on a 6-8 mm bottom plate by means

of 4 pcs. of M6 countersinked screws. We recommend you to use screws of min. quality 8.8. The thrust moment must not

exceed 10 Nm in the bottom plate thread.

Max. 15 mm

DL1

motor housing

Altri manuali per DESKLINE DL1A

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Linak Controllori

Linak

Linak TECHLINE LA35 Manuale utente

Linak

Linak HB100 Manuale utente

Linak

Linak TECHLINE LA35 Manuale utente

Linak

Linak EM-322 Manuale utente

Linak

Linak Homeline KA20IC Manuale utente

Linak

Linak ACTUATOR LA36 Manuale utente

Linak

Linak Homeline TWINDRIVE TD5 Standard Manuale utente

Linak

Linak TECHLINE LA25 Manuale di istruzioni

Linak

Linak Techline Linear Actuator Technology Manuale utente

Linak

Linak LA20 Manuale utente

Linak

Linak LA12 Manuale utente

Linak

Linak BusLink LA25 Manuale utente

Linak

Linak HOMELINE KA20IC2 Manuale utente

Linak

Linak TR-EM-239 Manuale utente

Linak

Linak MEDLINE LA32 Manuale operativo

Linak

Linak LA18 IC Advanced Manuale utente

Linak

Linak DESKLINE DB5 Manuale utente

Linak

Linak TECHLINE LA25 Manuale utente

Linak

Linak LA12 Manuale di istruzioni

Linak

Linak TR-EM-288-SAF Manuale utente

Linak

Linak TECHLINE LA25 Manuale di istruzioni

Linak

Linak DL12 Manuale utente

Linak

Linak 273 Series Manuale utente

Linak

Linak TECHLINE IO-Link LA25 Manuale utente

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente