4/18
Linde AG, Linde Gas Deutschland ©
2. SAFETY INSTRUCTIONS AND WARNINGS
1. Once the packing has been opened, make sure that the machine is not
damaged. If in any doubt, call the ser ice centre.
2. This equipment must only be used by qualified personnel.
3. During installation, any electric work must only be carried out by trained
personnel.
4. The machine must be used in a dry place with good entilation.
5. Make sure that no metal dust can be drawn in by the fan inside the
machine, as this could cause damage to the electronic circuits.
6. It is prohibited to connect more than one INVERTER generator in series or
in parallel.
7. When installing the machine, follow the local regulations on safety.
8. The position of the machine must allow easy access by the operator to the
controls and connectors.
9. When the welding machine is operating, all its co ers and doors must be
closed and well fixed.
10. Do not expose the welding machine to direct sunlight or to hea y
rain. This equipment conforms to protection rating IP23S.
11. During welding, the welding cables must be located near or at ground
le el. They should be as short as possible.
12. The operator must wear glo es, clothes, shoes, and a helmet or a
welder’s helmet, which protect and are fire-resistant in order to protect him
against electric shock, flashes and sparks from welding.
13. The operator must protect his eyes with safety isor or mask
designed for welding, fitted with standard safety filters. He should also be
aware that during electrical welding ULTRAVIOLET RADIATION is
emitted. Therefore it is ital that his face is also protected from radiation.
Ultra iolet rays produce the same harmful effect as sun burning on
unprotected skin.
14. The operator is obliged to warn anyone near the welding area of the
risks that welding in ol es and to arrange to pro ide adequate protection
equipment.
15. It is ery important to arrange for sufficient entilation, especially
when welding in enclosed spaces. We suggest using suitable fume
extractors to pre ent the risk of intoxication by fumes or gas generated by
the welding process.
16. The operator must ensure all flammable materials are remo ed from
the work area to a oid any risk of fire.
17. The operator must NEVER weld containers that ha e pre iously
contained petrol, lubricants, gas or similar flammable materials, e en if the
container has been empty for a considerable time. THERE IS A VERY
HIGH RISK OF EXPLOSION.
18. The operator must be aware of all the special regulations which he
needs to conform to when welding in enclosed spaces with a high risk of
explosion.
