Linear Technology DC2050A Manuale utente

dc2050af

DEMO MANUAL DC2050A

DESCRIPTION

LT3753

Active Clamp

Forward Converter with

Synchronous Rectification

Demonstration circuit 2050A is an active clamp forward

converter with synchronous rectification featuring the

3753.

This circuit was designed to demonstrate the high level

of performance, efficiency, and small solution size attain-

able using this part. It operates at 250kHz and produces

a regulated 5V, 20A output from an input voltage range

of 36V to 72V: suitable for telecom, industrial, and other

applications.Ithas an eighth-brick footprint area. Synchro-

nous rectificationhelps to attain efficiency exceeding 94%.

The DC2050 circuit features soft-start which prevents out-

put voltage overshoot during start-up or when recovering

from an overload condition.

L, LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks of Linear

Technology Corporation. All other trademarks are the property of their respective owners.

PERFORMANCE SUMMARY

The DC2050 has a precise overcurrent protection circuit

that allows for continuous operation and low power dis-

sipation during short-circuit conditions which ensures

high reliability.

Please refer to the LT3753 data sheet for design details

and applications information.

Design files for this circuit board are available at

http://www.linear.com/demo

Specifications are at TA= 25°C

SYMBOL PARAMETER CONDITIONS MIN TYP MAX UNITS

VIN Input Supply Range 36 72 V

VOUT Output Voltage 4.9 5.0 5.1 V

IOUT Output Current Range, Continuous 20 A

fSW Switching (Clock) Frequency 250 kHz

VOUT(P-P) Output Ripple VIN = 48V, IOUT = 20A (20MHz BW) 50 mVP-P

VREG Output Regulation Line and Load (36V to 72VIN, 0A to 20AOUT) ±0.1 %

POUT/PIN Efficiency (See Figure 2) VIN = 48V, IOUT = 20A 94 %

dc2050af

DEMO MANUAL DC2050A

QUICK START PROCEDURE

Note:When measuring the outputvoltage ripple, care must

be taken to avoid a long ground lead on the oscilloscope

probe. Measure the output voltage ripple by touching the

probe tip and ground ring directly across the last output

capacitor as shown in Figure 1.

1. Set an input power supply that is capable of 36V to

72V to 36V. Then turn off the supply.

2. Withpower off, connect the supplyto the input terminals

+VIN and –VIN.

a. Input voltages lower than 36V can keep the converter

from turning on due to the undervoltage lockout

feature of the LT3753.

b. If efficiency measurements are desired, an ammeter

capable of measuring 5A DC can be put in series with

the input supply in order to measure the DC2050A’s

input current.

c. A voltmeter with a capability of measuring at least

72V can be placed across the input terminals in order

to get an accurate input voltage measurement.

3. Turn on the power at the input.

Note: Make sure that the input voltage does not exceed

100V.

4. Check for the proper output voltage of 5V. Turn off the

power at the input.

5. Once the proper output voltages are established, con-

nect a variable load capable of sinking 20A at 5V to the

output terminals +VOUT and –VOUT. Set the current

for 0A.

a. If efficiency measurements are desired, an ammeter

or a resistor shunt that is capable of handling 20A

DC can be put in series with the output load in order

to measure the DC2050A’s output current.

b. Avoltmetercan be placed across theoutput terminals

in order to get an accurate output voltage measure-

ment.

6. Turn on the power at the input.

Note: If there is no output, temporarily disconnect the load

to make sure that the load is not set too high.

7. Once the proper output voltage is again established,

adjust the load within the operating range and observe

the output voltage regulation, ripple voltage, efficiency

and other desired parameters.

dc2050af

DEMO MANUAL DC2050A

QUICK START PROCEDURE

LOAD CURRENT (A)

3753 F21a

201210 16 18140

EFFICIENCY (%)

42 86

36VIN

48VIN

72VIN

Figure 1. Proper Measurement Equipment Setup

Figure 2. Efficiency vs Load Current

dc2050af

DEMO MANUAL DC2050A

QUICK START PROCEDURE

Figure 3. Output Ripple at 48VIN and 20AOUT (20MHz BW)

Figure 5. Thermal Map, Front Side at 48VIN and 20AOUT

(TA= 25°C)

Figure 6. Thermal Map, Back Side at 48VIN and 20AOUT

(TA= 25°C)

Figure 4. Transient Response Waveform at 48VIN and

10A to 20AOUT

2µs/DIV

50mV/DIV

100µs/DIV

500mV/DIV

10A/DIV

dc2050af

DEMO MANUAL DC2050A

PARTS LIST

ITEM QTY REFERENCE PART DESCRIPTION MANUFACTURER/PART NUMBER

Required Circuit Components

1 3 CIN1, CIN2, CIN3 CAP., X7S, 4.7µF, 100V, 10% 1210 TDK, CGA6M3X7S2A475K

2 1 CO1 CAP., X7R, 47µF, 10V, 10% 1210 MURATA, GRM32ER71A476KE15L

3 1 CSYS CAP., ALUM., 560µF, 10V, PANASONIC., 10SEP560M

4 1 CY1 CAP., X7R, 2200pF, 250V, 10% 1812 MURATA, GA343QR7GD222KW01L

5 1 C2 CAP., X7R, 4.7µF, 25V, 10% 0805 MURATA, GRM21BR61E475KA12L

6 1 C3 CAP., X7R, 22nF, 25V, 10% 0603 MURATA, GRM188R71E223KA01D

7 1 C4 CAP., X7S, 1µF, 100V, 10% 0805 TDK, C2012X7S2A105K

8 1 C5 CAP., C0G, 22pF, 50V, 5% 0603 MURATA, GRM1885C1H220JA01D

9 1 C12 CAP., X7R, 0.1µF, 50V, 10% 0603 MURATA, GRM188R71H104KA93D

10 3 C1, C13, C20 CAP., X7R, 1µF, 25V, 10% 0603 MURATA, GRM188R71E105KA12D

11 1 C14 CAP., X7R, 68nF, 250V, 10% 1206 MURATA, GRM31BR72E683KW03L

12 1 C15 CAP., X7R, 0.22µF, 250V, 10% 1210 MURATA, GRM32DR72E224KW01L

13 1 C18 CAP., C0G, 4.7nF, 50V, 5% 0603 MURATA, GRM1885C1H472JA01D

14 1 C21 CAP., C0G, 3.3nF, 50V, 5% 0603 MURATA, GRM1885C1H332JA01D

15 1 C22 CAP., X5R, 22µF, 10V, 10% 0805 TDK, C2012X5R1A226K

16 1 D4 ZENER DIODE, 4.3V, SOD-123 DIODES., BZT52C4V3-7-F

17 1 D5 DIODE, HIGH SPEED DIODE, SOD-523 NXP/PHILLIPS SEMI., BAS516

18 1 L1 INDUCTOR, 3.3µH CHAMPS, PQI2050-3R3

19 1 Q1 N-MOSFET POWER-56 INFINEON, BSC190N15NS3 G

20 1 Q2 SMPS MOSFET SO8 IR, IRF6217

21 2 Q3, Q4 POWER MOSFET, PG-TDSON-8 INFINEON, BSC0902NSI

22 1 RCS1 RES., CHIP, 0.012Ω, 1W, 1%, 0815 SUSUMU, RL3720WT-R12-F

23 1 R1 RES., Chip, 30.1k, 0.1W, 1% 0603 VISHAY, CRCW060330K1FKEA

24 1 R2 RES., Chip, 14.7k, 0.1W, 1% 0603 VISHAY, CRCW060314K7FKEA

25 1 R5 RES., Chip, 44.2k, 0.1W, 1% 0603 VISHAY, CRCW060344K2FKEA

26 1 R6 RES., Chip, 57.6k, 0.1W, 1% 0603 VISHAY, CRCW060357K6FKEA

27 1 R7 RES., Chip, 1.87k, 0.1W, 1% 0603 VISHAY, CRCW06031K87FKEA

28 1 R8 RES., Chip, 1.96k, 0.1W, 1% 0603 VISHAY, CRCW06031K96FKEA

29 1 R9 RES., Chip, 105k, 0.125W, 1% 0805 YAGEO, RC0805FR-07105KL

30 3 R15, R21, R24 RES., Chip, 1.0k, 0.1W, 5% 0603 VISHAY, CRCW06031K00JNEA

dc2050af

DEMO MANUAL DC2050A

PARTS LIST

ITEM QTY REFERENCE PART DESCRIPTION MANUFACTURER/PART NUMBER

31 1 R16 RES., Chip, 34.8k, 0.1W, 1% 0603 VISHAY, CRCW060334K8FKEA

32 1 R17 RES., Chip, 15Ω, 0.1W, 5% 0603 VISHAY, CRCW060315R0JNEA

33 2 R18, R19 RES., Chip, 100k, 0.1W, 5% 0603 VISHAY, CRCW0603100KJNEA

34 2 R20, R28 RES., Chip, 137k, 0.25W, 1% 0603 VISHAY, CRCW0603137KFKEA

35 1 R23 RES., Chip, 100Ω, 0.1W, 5% 0603 VISHAY, CRCW0603100RJNEA

36 1 R25 RES., Chip, 10k, 0.1W, 5% 0603 VISHAY, CRCW060310K0JNEA

37 1 R26 RES., Chip, 200Ω, 0.125W, 1% 0805 YAGEO, RC0805FR-07200R

38 1 R29 RES., Chip, 100Ω, 0.125W, 1% 0805 VISHAY, CRCW0805100RFKEA

39 1 R32 RES., Chip, 5.1Ω, 0.125W, 5% 1206 VISHAY, CRCW12065R10JNEA

40 1 R33 RES., Chip, 5.1Ω, 0.125W, 5% 0805 VISHAY, CRCW08055R10JNEA

41 1 T1 TRANSFORMER, CHAMPS, G45R2-0209

42 1 U1 I.C., LT3753EFE#TRPBF, TSSOP-38(31) LINEAR TECH., LT3753EFE#TRPBF

43 1 U2 I.C., PS2801C-1-P-A NEC, PS2801C-1-P-A

44 1 U3 I.C., LT1431CS8 SO8 LINEAR TECH., LT1431CS8#TRPBF

Additional Demo Board Circuit Components

1 0 CO2 (OPT) CAP., 1210

2 0 C31 (OPT) CAP.,

3 0 R10 (OPT) RES., 0603

Hardware-For Demo Board Only

1 2 E1, E2 TESTPOINT, TURRET, 0.061" PBF MILL-MAX, 2308-2-00-80-00-00-07-0

2 4 E3, E4, E5, E6 TESTPOINT, TURRET, 0.094" PBF MILL-MAX, 2501-2-00-80-00-00-07-0

3 4 J1-J4 BANANA JACK KEYSTONE, 575-4

4 4 MH1-MH4 STAND-OFF, NYLON 0.25" KEYSTONE, 8831(SNAP ON)

5 1 FAB, PRINTED CIRCUIT BOARD DEMO CIRCUIT 2050A

dc2050af

DEMO MANUAL DC2050A

Information furnished by Linear Technology Corporation is believed to be accurate and reliable.

However, no responsibility is assumed for its use. Linear Technology Corporation makes no representa-

tion that the interconnection of its circuits as described herein will not infringe on existing patent rights.

SCHEMATIC DIAGRAM

SW1 +VO1

INTVCC

T1-2

T1-5

T1-2

T1-5

SW1

SW2

SGND

+VO1

+VOUT

5V / 20A

-VIN

36V - 72V

+VIN

NOTE:

UNLESS OTHERWISE SPECIFIED:

ALL RESISTORS & CAPACITORS ARE 0603 .

ALL RESISTORS ARE 1% MULTILAYER RESISTORS.

ALL CERAMIC CAPACITORS ARE X7R

EVAL1: EFE PACKAGE (FE38 (31) )

BOARD SIZE: 2.30 BY 1.45

-VOUT

SYNC

GND

3.3uH

PQI2050-3R3

3.3uH

PQI2050-3R3

CIN3CIN3

PA2720NL

T1(OPT 2)

PA2720NL

T1(OPT 2)

G45R2-0209

R20

137K

R20

137K

J3J3

22pF

R19

100K

R19

100K

C22

22uF

0805

10V

C22

22uF

0805

10V

BSC0902NSI

CY1

2200pF

250V

1812

CY1

2200pF

250V

1812

CO2

1210

OPT

CO2

1210

OPT

R21 1KR21 1K

E6E6

R23

100

R23

100

R28

137K

R28

137K

RCS1

0.012

0815

RCS1

0.012

0815

R25

10K

R25

10K

J2J2

LT3753EFE

COMP

SYNC

TBLNK

SS1

TOS

GND

SS2

OUT

AOUT

ISENSEN

ISENSEP

VIN

TEST2

TEST1

TAS

TAO

IVSEC

UVLO_VSEC

OVLO

INTVCC

SOUT

PGND

R7 1.87K

PS2801-1

C20

1uF

C20

1uF

R5 44.2K

C13

1uF

C13

1uF

R9 105K

0805

R9 105K

0805

30.1K

C12

0.1uF

C12

0.1uF

E3E3

LT1431CS8

COLLECTOR

GND-F

GND-S

RMID

RTOP

COMP

REF

V+

C15

0.22uF

250V

1210

C15

0.22uF

250V

1210

J1J1

R24

CIN2

100V CIN2

100V R17

R17

CIN1

4.7uF

1210

CIN1

4.7uF

1210

J4J4

R6 57.6K

R16

34.8K

R16

34.8K

C14

1206

250V

68nF

C14

1206

250V

68nF

1uF

BAS516

R33

5.1

0805

R33

5.1

0805

47uF

10V

CO1

1210

47uF

10V

CO1

1210

R18

100K

R18

100K

E5E5

1.96K

BZT52C4V3

R15

E2E2

E4E4

22nF

CSYS

560uF

10V

CSYS

560uF

10V

BSC0902NSI

BSC190N15NS3 G

R29

100

0805

R29

100

0805

1uF

100V

0805

1uF

100V

0805

4.7uF

25V

0805

4.7uF

25V

0805

C31

33uF

100V

(OPT)

C31

33uF

100V

(OPT)

C18

4.7nF

C18

4.7nF

IRF6217

R32

5.1

1206

R32

5.1

1206

R2 14.7KR2 14.7K

C21

3.3nF

C21

3.3nF

R10

OPT

R10

OPT

R26

200

0805

R26

200

0805

E1E1

dc2050af

DEMO MANUAL DC2050A

Linear Technology Corporation

1630 McCarthy Blvd., Milpitas, CA 95035-7417

(408) 432-1900 ●FAX: (408) 434-0507 ●www.linear.com

 LINEAR TECHNOLOGY CORPORATION 2014

LT 0414 • PRINTED IN USA

DEMONSTRATION BOARD IMPORTANT NOTICE

Linear Technology Corporation (LT C ) provides the enclosed product(s) under the following AS IS conditions:

This demonstration board (DEMO BOARD) kit being sold or provided by Linear Technology is intended for use for ENGINEERING DEVELOPMENT

OR EVALUATION PURPOSES ONLY and is not provided by LT C for commercial use. As such, the DEMO BOARD herein may not be complete

in terms of required design-, marketing-, and/or manufacturing-related protective considerations, including but not limited to product safety

measures typically found in finished commercial goods. As a prototype, this product does not fall within the scope of the European Union

directive on electromagnetic compatibility and therefore may or may not meet the technical requirements of the directive, or other regulations.

If this evaluation kit does not meet the specifications recited in the DEMO BOARD manual the kit may be returned within 30 days from the date

of delivery for a full refund. THE FOREGOING WARRANTY IS THE EXCLUSIVE WARRANTY MADE BY THE SELLER TO BUYER AND IS IN LIEU

OF ALL OTHER WARRANTIES, EXPRESSED, IMPLIED, OR STATUTORY, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS

FOR ANY PARTICULAR PURPOSE. EXCEPT TO THE EXTENT OF THIS INDEMNITY, NEITHER PARTY SHALL BE LIABLE TO THE OTHER FOR

ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.

The user assumes all responsibility and liability for proper and safe handling of the goods. Further, the user releases LT C from all claims

arising from the handling or use of the goods. Due to the open construction of the product, it is the user’s responsibility to take any and all

appropriate precautions with regard to electrostatic discharge. Also be aware that the products herein may not be regulatory compliant or

agency certified (FCC, UL, CE, etc.).

No License is granted under any patent right or other intellectual property whatsoever. LT C assumes no liability for applications assistance,

customer product design, software performance, or infringement of patents or any other intellectual property rights of any kind.

LT C currently services a variety of customers for products around the world, and therefore this transaction is not exclusive.

Please read the DEMO BOARD manual prior to handling the product. Persons handling this product must have electronics training and

observe good laboratory practice standards. Common sense is encouraged.

This notice contains important safety information about temperatures and voltages. For further safety concerns, please contact a LT C applica-

tion engineer.

Mailing Address:

Linear Technology

1630 McCarthy Blvd.

Milpitas, CA 95035

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Analog Devices Inc.:

DC2050A

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Linear Technology Convertitore multimediale

Linear Technology

Linear Technology LT3956 Series Manuale utente

Linear Technology

Linear Technology DC2105A-A Guida rapida alla configurazione

Linear Technology

Linear Technology LTC3765 Guida rapida alla configurazione

Linear Technology

Linear Technology LTC3118EUFD Guida rapida alla configurazione

Linear Technology

Linear Technology DEMONSTRATION CIRCUIT 518 Manuale utente

Linear Technology

Linear Technology LT3748 Guida rapida alla configurazione

Linear Technology

Linear Technology 431 Manuale utente

Linear Technology

Linear Technology DC627A-A Manuale utente

Linear Technology

Linear Technology DC257 Guida rapida alla configurazione

Linear Technology

Linear Technology DC1745A Guida rapida alla configurazione

Linear Technology

Linear Technology LTC3455EUF-1 Manuale utente

Linear Technology

Linear Technology DC2056A Guida rapida alla configurazione

Linear Technology

Linear Technology LTC1702 Guida rapida alla configurazione

Linear Technology

Linear Technology LTC3129-1 Manuale utente

Linear Technology

Linear Technology DC1929A Guida rapida alla configurazione

Linear Technology

Linear Technology LT8302 Manuale di istruzioni

Linear Technology

Linear Technology DC2372A Guida rapida alla configurazione

Linear Technology

Linear Technology LTM8046 Guida utente

Linear Technology

Linear Technology LT1300 Manuale utente

Linear Technology

Linear Technology LTC3130EUD-1 Manuale utente

Linear Technology

Linear Technology LT1933 Manuale utente

Linear Technology

Linear Technology DC1881A Guida rapida alla configurazione

Linear Technology

Linear Technology DC1883A Guida rapida alla configurazione

Linear Technology

Linear Technology LT1952-1 Manuale utente

Manuali Convertitore multimediale popolari di altre marche

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuale utente

SPROLINK

SPROLINK VA1 Manuale utente

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuale utente

Nikon

Nikon AF-S TC-20E III Manuale utente

Axis

Axis AXIS Q7406 Manuale utente

Omega

Omega TAC80B-J Manuale utente

Zoom

Zoom Thunderbolt TAC-2R Manuale utente

OST

OST iConverter 10/100M Manuale utente

Vertiv

Vertiv Netsure Manuale utente

birddog

birddog MINI Manuale utente

Roland

Roland GI-10 Manuale utente

Wallenstein

Wallenstein WX310 Manuale utente

Pace

Pace MSS 200-1 Manuale utente

Solar Converters

Solar Converters EQ 12/24-50 Manuale utente

CYP

CYP EL-7400V Manuale utente

TIE

TIE MIDI 1i1o Manuale utente

DCS

DCS Vivaldi Upsampler Manuale utente

Westermo

Westermo MCW-211 SERIES Manuale utente