Linear Security DUAL 824 Manuale di installazione

SUPERVISED WIRELESS

SECURITY CONTROL PANEL

DUAL 824

USA & Canada (800) 421-1587 & (800) 392-0123

(760) 438-7000 - Toll Free FAX (800) 468-1340

www.linearcorp.com

Installation & Programming Instructions

PRINTER’S INSTRUCTIONS:

INSTR,INSTL,DUAL 824 - LINEAR P/N: 217703 D - INK: BLACK - MATERIAL: 20 LB. MEAD BOND WITH 80 LB. WHITE COATED COVER - SIZE: 8.500” X 11.000” - SCALE: 1-1 - FOLDING: ALBUM FOLD - BINDING: SADDLE-STITCH

CONGRATULATIONS for selecting Linear's DUAL 824

Security System. The Model DUAL 824P Control Panel and

the Model DUAL 824KP Keypad incorporate many advanced

and sophisticated features. The system can be expanded

and customized to ﬁt the installation's speciﬁc needs.

The DUAL 824P Control Panel and its accessories are

designed and manufactured by the oldest wireless security

company in North America. You can look ahead to many

years of reliable service with this Control Panel and its

accessories.

Many insurance companies offer discounts on homeowners and

renters policies when a security system is installed. Discount

credits vary with different companies and generally increase in

savings with an increase in the level of protection. Inform the

user to ask their insurance agent about savings available.

The DUAL 824P Control Panel is UL Listed. For a UL smoke

alarm system, there must be at least one smoke detector

programmed into the Control Panel to meet National Fire

Protection Association (NFPA) Rule 72 Chapter 2 and UL

217 requirements. Many insurance companies require these

conditions to be met to qualify for a discount. Only use the

Model DXS-73 smoke detector with this Control Panel for a

UL smoke alarm system.

NOTE: Some cities and municipalities may require an

alarm system permit. Check with the local authorities

before installing this system.

In this manual, the bullets preceding the text help to deﬁne

the information. For example:

✦ This symbol indicates a feature.

✴ This symbol is for lit indications or system

sounds.

✎ This symbol is for important notes.

CONTROL PANEL

MODEL DUAL 824P

KEYPAD

MODEL DUAL 824KP

DUAL 824 SYSTEM

UL Listed as a Single Station

Smoke Detector Accessory, also

suitable as a Household Burglar-

Alarm System Control Unit. UL

Category CCN UTGT & NBSX

RING

TIP

DUAL 824 WIRING DIAGRAM

WARNING:

Incoming

Phone Line

Local

Telephones

RED

GREEN

GRAY

BROWN

AUXILIARY FUSE

TYPE 2AG, 1 AMP

ANT

SHIELD

To internal antenna

wires or to Model LA-P

external antenna kit

RED (+)

BLACK (-)

CONNECT TO

12 VDC/4AH

GEL CELL

BATTERY

LOOP

COM LOOP

LOOP

COM LOOP

LOOP

COM LOOP

LOOP

COM LOOP

H/A

RLY

COM

RLY

N/C

RLY

N/O

+12

VDC

KPD

CLK

KPD

DAT

KPD

SPK+

KPD

SPK -

AC AC

HARDWIRED LOOP INPUTS OUTPUTS KEYPAD XFRMR

BATTERY FUSE

TYPE 2AG, 3 AMP

Battery wires

Charging voltage: 13.8 VDC

ANTENNA

BACKUP BATTERY

Normal battery

life should

exceed 3 years

TELEPHONE

Fire protection must follow NFPA Standard No. 72 (National

Fire Protection Association, Batterymarch Park, Quincy, MA

02269). Printed information describing proper installation,

operation, testing, maintenance, evacuation planning, and

repair service is to be provided with this equipment.

TRANSFORMER

16VAC, 1.25A

Connect to

24hr. 120VAC,

60 Hz Outlet

LOOP RESPONSE TIME: 400 mS MAXIMUM RECOMMENDED LOOP LENGTH: 500 FEET

AUTOMATION

OUTPUT

Current limited

switched

+12 VDC, 40 mA

voltage source

See instructions

for output options

ALARM RELAY

Rated 12 volts,

1 amp maximum

EXTERNAL SIREN

12 VDC at 1 Amp

maximum

To any COM terminal

RED

BLACK

ORANGE

WHITE

KEYPAD WIRING

4-conductor 22 AWG wire

Up to 100 feet for all keypads used allowed

DUAL 824KP

HARDWIRED KEYPAD

ONE OR TWO

UNITS ALLOWED

AUXILIARY

POWER

OUTPUT

12 VDC at 1 Amp

maximum

FOR INSTALLATION INSTRUCTIONS,

REFER TO THE MANUAL SUPPLIED

WITH THIS PRODUCT

N.C.

2.2k

E.O.L.

RESISTOR

LOOP 1

N.C.

2.2k

E.O.L.

RESISTOR

LOOP 2

N.O. N.O.

N.C.

2.2k

E.O.L.

RESISTOR

LOOP 3

N.C.

2.2k

E.O.L.

RESISTOR

LOOP 4

N.O. N.O.

N.C.

2.2k

E.O.L.

RESISTOR

LOOP 5

N.C.

2.2k

E.O.L.

RESISTOR

LOOP 6

N.O. N.O.

N.C.

2.2k

E.O.L.

RESISTOR

LOOP 7

N.C.

2.2k

E.O.L.

RESISTOR

LOOP 8

N.O. N.O.

CAUTION: IMPORTANT:

(760) 438-7000 • FAX (760) 438-7043

USA & Canada (800) 421-1587 & (800) 392-0123

Toll Free FAX (800) 468-1340

www.linearcorp.com

1) MISCONNECTIONS MAY CAUSE DAMAGE TO

CONTROL PANEL ELECTRONICS

2) DO NOT REVERSE BATTERY LEADS

3) TO PREVENT RISK OF ELECTRICAL SHOCK,

DISCONNECT TELCO JACK BEFORE SERVICING

THIS CONTROL PANEL

4) FOR CONTINUED PROTECTION AGAINST FIRE,

REPLACE ONLY WITH SAME TYPE AND RATING OF

FUSES

1) NO USER SERVICABLE PARTS INSIDE

2) RISK OF FIRE AND ELECTRICAL SHOCK, ROUTE

WIRES AWAY FROM INTERNAL COMPONENTS

3) REMOVE AC POWER BEFORE CONNECTING

TRANSFORMER, BATTERY, OR REPLACING FUSES

1) USE UL LISTED CABLE FOR ALL CONNECTIONS

2) WEEKLY TESTING IS REQUIRED TO ENSURE PROPER

OPERATION OF THIS SYSTEM

3) DO NOT CONNECT AC POWER TO A RECEPTACLE

CONTROLLED BY A SWITCH

4) CONNECTION OF THE FIRE ALARM SIGNAL TO A

FIRE ALARM HEADQUARTERS OR A CENTRAL STATION

SHALL BE PERMITTED ONLY WITH THE APPROVAL OF

THE LOCAL AUTHORITY HAVING JURISDICTION. THE

BURGLAR ALARM SIGNAL SHALL NOT BE CONNECTED

TO A POLICE EMERGENCY NUMBER.

LINEAR LLC

RESIDENTIAL SECURITY RECEIVER

MODEL: DUAL 824

PART # SSC00056

FREQUENCY: 315 MHz

POWER SUPPLY: 16 VAC, 1.25A

This device complies with FCC Part 15 and IC

Canada Rules and Regulations. Operation is

subject to the following two conditions: (1) This

device may not cause harmful interference and (2)

this device must accept any interference received,

including interference that may cause undesired

operation.

Complies with Part 68, FCC Rules.

FCC Registration Number: EF4HKG-31823-AL-E

Ringer Equivalence Number: 1.7B

Warranty Expiration Date:

MODEL RSM-2

VOICE RESPONSE

SPEAKER

8 Ohm - 2 Watts

USOC JACKS:

RJ31X, RJ38X

MADE IN CHINA 454

CANADIAN REGULATORY INFORMATION

IC ID 1078-102-556A

Complies with IC RSS 210

En conformité avec IC CNR 210.

INTRODUCTION

1. THE DUAL 824 SECURITY SYSTEM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

CONTROL PANEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

DOOR/WINDOW SENSORS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

WIRELESS KEYPAD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

SMOKE DETECTOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

REMOTE CONTROLS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

GLASS BREAK DETECTOR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

PANIC BUTTONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

BILL TRAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

PASSIVE INFRARED MOTION DETECTOR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2. SECURITY SYSTEM FLOOR PLAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

EXAMPLE SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

DESIGN THE INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

3. OVERVIEW OF KEYPADS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

HARDWIRED KEYPAD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

WIRELESS KEYPAD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

ABOUT SENSOR STATUS SUPERVISION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

4. HARDWIRED KEYPAD FEATURES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

5. CONTROL PANEL FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

6. CONTROL PANEL INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

SYSTEM LOCATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

WALL MOUNTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

EXTERNAL ANTENNA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

HARDWIRED KEYPAD INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

HARDWIRED LOOP WIRING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

ARM/DISARM KEY STATION WIRING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

EXTERNAL ALARM SIREN CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

TELEPHONE LINE CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

AUTOMATION OUTPUT CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

VOICE RESPONSE MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

CONTROL PANEL POWER CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

BACKUP BATTERY INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

7. BASIC CONTROL PANEL PROGRAMMING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

CREATE THE MASTER USER CODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

PROGRAM THE HARDWIRED LOOPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

PROGRAM THE WIRELESS SENSORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

PROGRAMMING DIFFERENT SENSOR TYPES. . . . . . . . . . . . . . . . . . . . . . . . 16

8. BASIC SENSOR INSTALLATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

DXS-10 WIRELESS KEYPAD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

DXS-31 & DXS-32 DOOR/WINDOW SENSORS . . . . . . . . . . . . . . . . . . . . . . . . 19

TEST SENSORS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

9. CUSTOMIZING THE KEYPAD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

LABELING THE SENSOR LOCATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

10. SYSTEM OPERATING MODES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

OFF MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

CHIME MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

HOME MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

SECURE EXIT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

HOME INSTANT MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

MANUAL BYPASSING OF SENSORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

AWAY MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

MANUAL BYPASSING OF SENSORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

TEST MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

11. SYSTEM TROUBLE INDICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

CONTROL PANEL POWER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

WIRELESS SENSOR LOW BATTERIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

SENSOR RADIO TROUBLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

12. CUSTOMIZING THE SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

ADDING SENSORS TO THE SYSTEM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

REMOVING SENSORS FROM THE SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . 26

MAKING A SENSOR A 24-HOUR DOOR CHIME . . . . . . . . . . . . . . . . . . . . . . . 27

MAKING A SENSOR INTERIOR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

MAKING A SENSOR PERFORM A DIFFERENT FUNCTION . . . . . . . . . . . . . . 28

13. ADVANCED PROGRAMMING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

SETUP MODE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

CHANGING A SENSORS SUPERVISION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

CHANGING A SENSORS RESTORE REQUIREMENTS . . . . . . . . . . . . . . . . . . 30

ENTRY DELAY TIME. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

EXIT DELAY TIME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

BURGLARY SIREN TIME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

EMERGENCY SIREN TIME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

FIRE SIREN TIME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

AUTOMATION OUTPUT TIME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

REMOTE CONTROL & HARDWIRE ARMING LEVEL . . . . . . . . . . . . . . . . . . . . 31

REMOTE CONTROL & HARDWIRE DISARMING LEVEL . . . . . . . . . . . . . . . . . 31

ENTRY DELAY BEEPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

EXIT DELAY BEEPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

SILENT BURGLARY ALARMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

SILENT EMERGENCY ALARMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

DISABLING QUICK ARMING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

AUTOMATIC RESTORAL OF BYPASSED SENSORS . . . . . . . . . . . . . . . . . . . . 32

AUTOMATIC BYPASSING OF OPEN SENSORS . . . . . . . . . . . . . . . . . . . . . . . . 32

AUTOMATION OUTPUT MODE DURING ALARM . . . . . . . . . . . . . . . . . . . . . . . 33

AUTOMATION ACTIVATION TONE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

REMOTE CONTROL & HARDWIRE ARM/DISARM CHIRP . . . . . . . . . . . . . . . . 33

AUTOMATION OUTPUT ON DURING AND AFTER ALARM . . . . . . . . . . . . . . . 33

AUTOMATION OUTPUT ON DURING ALARM. . . . . . . . . . . . . . . . . . . . . . . . . . 33

AUTOMATION OUTPUT WHILE ARMED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

AUTOMATION OUTPUT DURING EXIT/ENTRY DELAYS . . . . . . . . . . . . . . . . . 34

AUTOMATION OUTPUT POLARITY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

REMOTE ACCESS PASSWORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

DURESS CODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

MASTER USER CODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

ADDING ADDITIONAL USER CODES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

REMOVING ADDITITIONAL USER CODES. . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

CONTROL PANEL MASTER RESET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

14. COMMUNICATOR PROGRAMMING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

SETUP MODE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

GENERAL COMMUNICATOR OPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

COMMUNICATOR ENABLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

2-WAY AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

VOICE RESPONSE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

REMOTE LOCKOUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

CALL LIMITER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

DIALING DELAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

DIALING METHOD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

COMMUNICATOR REPORTING OPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

REPORTING FORMAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

CALL ROUTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

ACCOUNT NUMBER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

PRIMARY TELEPHONE NUMBER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

SECONDARY TELEPHONE NUMBER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

SUPERVISORY OR PAGER TELEPHONE NUMBER . . . . . . . . . . . . . . . . . . . . 40

TELEPHONE NUMBER DELAYS AND SPECIAL CHARACTERS. . . . . . . . . . . 40

REPORT CONTROL PANEL TROUBLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

REPORT FORCE ARMING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

OPENING AND CLOSING REPORTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

POINT ID REPORTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

COMMUNICATOR REPORTING CODES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

GENERAL REPORTING CODES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

SYSTEM REPORTING CODES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

FORCE ARMING REPORTING CODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

DURESS REPORTING CODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

4 BY 2 FORMAT POINT ID REPORTING CODES . . . . . . . . . . . . . . . . . . . . . . . 44

4 BY 2 FORMAT POINT ID ALARM REPORT CODES. . . . . . . . . . . . . . . . . . . . 44

4 BY 2 FORMAT POINT ID TROUBLE REPORT CODES . . . . . . . . . . . . . . . . . 44

IMPORTANT INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

LINEAR LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

WIRELESS PRODUCT NOTICE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

FCC NOTICE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

FCC TELEPHONE RULES AND REGULATIONS . . . . . . . . . . . . . . . . . . . . . . . . 46

FIRE EVACUATION PLANNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

INDUSTRY CANADA NOTICES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

TABLE OF CONTENTS

CONTROL PANEL

The DUAL 824P Control Panel is the heart of the system.

It monitors all of the system's wireless sensors, hardwired

loops, and controls the alarm sirens and Model DUAL 824KP

hardwired keypads.

The Control Panel constantly monitors the condition of the

system's sensors and hardwired contacts, displaying which

protected doors and windows are open or closed. If an

alarm occurs, the keypads display which sensor(s) caused

it. When a sensor has a low battery, the keypads display

which sensor needs a new battery. Sensors that send hourly

status transmissions keep the Control Panel informed of their

operating condition.

Up to eight different custom user codes can be used to

operate the system. For security, a user code must be

entered to disarm (turn off) the system. The system can be

armed (turned on) by entering a user code, or with the unique

“Quick Arm” feature. The ﬁve restricted user codes and the

special page alert user code can only arm and disarm the

system, no programming changes (except changing user

and duress codes) are allowed. The master user code is

allowed to program the Control Panel, and a duress code

can be selected for emergency disarming of the system with

a duress report to the Central Station. The page alert user

code can dial a pager number to inform the pager wearer

when the system is disarmed.

The Control Panel's memory will retain the user codes and

all of the system's programming, even during a total power

loss. An optional backup battery can be installed to power the

system during short power failures.

The built-in digital communicator connects the Control Panel

to a Central Alarm Monitoring Station through the telephone.

With a monitored system, the central station can dispatch

authorities in case of burglary, ﬁre or other emergency. The

central station can also call family, friends, neighbors, or

anyone else designated on a custom call list. System arming

(closing) and disarming (opening) reports by user can also

be sent.

Each sensor can report directly to the Central Station using

the digital communicator's Point ID feature. If a sensor triggers

an alarm or experiences supervisory trouble, a unique report

code can be sent for immediate identiﬁcation of the event.

The optional Model VB-2 digital voice response module can

be installed in the Control Panel. The VB-2 module provides

three exciting features: 2-way audio monitoring capability at

the Central Station through the communicator, local voice

prompts from the keypad's speaker (with Model RSM-2

speaker/microphone kit installed), and voice prompted

remote system control using in-house or off-site pushbutton

telephones.

The system has 24-hour capabilities that are always ready

to operate, even when the system is disarmed. They can be

triggered by buttons on the hardwired keypads, a wireless

keypad, portable remote controls, carbon monoxide detectors,

and smoke detectors. Pressing the EMERGENCY or FIRE button

for two seconds will cause an immediate siren and call the

central station. IMPORTANT: For personal emergency use

only. Not for use as a UL Listed Medical Alert System.

The Control Panel's Environmental feature is active 24-hours

and can be triggered with sensors connected to devices such

as water ﬂow detectors, over/under temperature sensors, ﬂood

sensors, etc. The Environmental feature activates the chime

annunciator without sounding the siren. The Environmental

feature does not send communicator reports.

An Automation Output in the Control Panel provides an

easy way to connect external devices to the Control Panel.

The output is fully programmable to activate on a variety

of conditions, such as when the system is armed, during

alarms, and during exit/entry delays. The Automation Output

can connect to lighting control modules, relays, noisemakers,

and indicators. The Control Panel's and wireless keypad's

key and any system sensors can control the Automation

Output.

The Control Panel can be programmed locally using its own

keypad or remotely, over the telephone, using Linear's Model

RA-2400 Remote Access software program. The RA-2400

upload/download program is a Windows™application that

runs on a personal computer and communicates with the

Control Panel through a modem, connected directly to the

panel, or through the telephone line.

1. THE DUAL 824 SECURITY SYSTEM

DXS-91 GLASS

BREAK DETECTOR †

DXS-73

SMOKE DETECTOR

DUAL 824P

CONTROL

PANEL

DXS-10

WIRELESS

KEYPAD

DXS-31

DOOR/WINDOW

SENSOR

DXS-54

PIR

DXT-41 & DXT-42

REMOTES

DXT-61A

REMOTE †

DXS-81

BILL TRAP †

DXT-21 & DXT-23

REMOTES †

DUAL 824KP

HARDWIRED

KEYPAD

DXS-32 MINI

DOOR/WINDOW

SENSOR

DXS-62A

REMOTE

† NOTE: These accessories

are not listed by UL.

DOOR/WINDOW SENSORS

The DXS-31 and DXS-32 sensors monitor doors and windows. They

send radio signals to the Control Panel. One type of signal is sent

when the door or window is opened, and a different type of signal is

sent when the door or window is closed. If the system is armed, a

sensor can trigger the Control Panel's burglary siren when its door

or window is opened. Both sensors are supervised, send hourly

status reports, and monitor their battery condition.

WIRELESS KEYPAD

The DXS-10 wireless keypad is used to operate the system remotely.

It can be placed in a convenient spot so the user doesn't have to

go to the hardwired keypad to operate the system. The wireless

keypad can also trigger the emergency or ﬁre siren and actuate the

Automation Output. Pressing will cause the hardwired keypad(s)

to sound Beeps corresponding to the current

operating mode. The DXS-10 is supervised,

it sends hourly status reports and monitors

its battery condition. IMPORTANT: For

personal emergency use only. Not for use

as a UL Listed Medical Alert System.

SMOKE DETECTOR

The DXS-73 is a high quality smoke detector with a built-in radio

transmitter. As soon as smoke is detected, the unit will sound its local

noisemaker. Then, 20 seconds after the local noisemaker sounds,

the transmitter sends an alarm signal to the Control Panel.The alarm

signal will be repeated every 20 seconds as long

as smoke is still present. A restoral signal will be

sent when the smoke detection chamber clears.

The DXS-73 is supervised, it sends hourly status

reports, and monitors its battery condition.

☞NOTE: A Model DXS-73 Smoke Detector is required to

create a UL Listed smoke alarm system. See Page 26 for

details on adding a smoke detector sensor to the system.

REMOTE CONTROLS

The DXT-41, DXT-61 single-button and DXT-23, DXT-42 multi-button

remote controls can be used to remotely arm and disarm the system.

The DXT-42’s left button will arm and the right button will disarm

the system. Pressing both buttons simultaneously will trigger the

emergency siren. Alternately the Control Panel can be programmed

to respond to the DXT-42 by arming and disarming with the left

button, and activating the automation output with the right button.

These transmitters can also be programmed to activate various

other Control Panel zones. These transmitters are not supervised.

GLASS BREAK DETECTOR

The DXS-91 is a glass break detector with an audio sound

discriminator and a built-in radio transmitter. The unit “listens” for

the sound of breaking glass. When glass breakage is detected,

the unit sends an alarm signal to the Control Panel. The DXS-91 is

supervised, it sends hourly status reports and monitors its battery

condition.

PANIC BUTTONS

The DXT-21, DXS-21 single-button, and DXT-23, DXS-23 two-button

transmitters can be used as portable “panic buttons”. Pressing the

front or top button on the DXT-21 or DXS-21 at any time will trigger

the emergency siren. Pressing both front buttons simultaneously

on the DXT-23 or DXS-23 at any time will trigger the emergency

siren. These transmitters can be programmed to activate various

other system functions.The DXT-21 and DXT-23 transmitters are not

supervised. The DXS-21 and DXS-23 transmitters are supervised.

The DXS-62A transmitter is typically used as a portable “panic

button”. Pressing the button on a DXS-62A at any time will trigger

the emergency siren.This transmitter can send hourly status signals

and low battery signals if the battery is low.

BILL TRAP

The DXS-81 bill trap can be used with the Control Panel in non-

UL small commercial hold-up installations. The unit is concealed in

a cash drawer under a stack of currency, with a single “bait” bill

secured in its money clip. During a hold-up, the cashier removes

the stack of currency along with the “bait” bill. When a “bait” bill is

removed, the transmitter sends a signal to the Control Panel. Four

additional signals are sent within the ﬁrst minute

after the “bait” bill is removed. When the “bait” bill

is replaced, a restore signal is sent. The DXS-81

is supervised, it can send hourly status reports

(optional) and monitors its battery condition.

PASSIVE INFRARED MOTION DETECTOR

The DXS-54 is a passive infrared (PIR) motion detector with a built-in

radio transmitter. The PIR detects motion in its detection pattern by

measuring the infrared emission levels of objects that it “sees”. If

the infrared levels change quickly, as when a person moves across

the detection pattern, the PIR will recognize the

change as an intrusion and send an alarm signal

to the Control Panel. An alarm will be triggered if

the system is in the Away Mode. The DXS-54 is

supervised, it sends hourly status reports and

monitors its battery condition.

DXS-31

DXS-32

DXS-10

DXS-73

DXT-41

DXT-61‡

DXT-42

DXS-91‡

DXT-21‡ DXS-21‡ DXT-23‡ DXS-23‡ DXS-62A

DXS-81‡

DXS-54

‡ NOTE: These accessories not listed by UL

EXAMPLE SYSTEM

✦ The example shows a typical DUAL 824 system.

✦ Any or all of the accessories shown can be used.

✦ A total of 24 sensors can be used with each

Control Panel. Each wireless sensor, hardwired

loop, and wireless keypad used occupies a

sensor location.

DESIGN THE INSTALLATION

1. Draw a ﬂoor plan for the installation.

2. Consider the security needs of the premises.

3. Determine which doors and windows are

vulnerable to intrusion.

4. Figure which interior areas an intruder might go

to if unlawful entrance is gained.

5. Indicate locations for door/window sensors,

interior motion detectors, wireless and hardwired

keypads, glass break detectors and external

siren speakers.

6. Decide on a centralized location for the security

Control Panel.

2. SECURITY SYSTEM FLOOR PLAN

GARAGE

CP - CONTROL PANEL

HK - HARDWIRED KEYPAD

S - DOOR/WINDOW SENSOR

WK - WIRELESS KEYPAD

MD - MOTION DETECTOR

ES - EXTERNAL SIREN

SD - SMOKE DETECTOR

CO - CARBON MONOXIDE DETECTOR

GB - GLASS BREAK SENSOR

MS - HARDWIRED MAGNETIC SWITCH

LIVING

DINING

KITCHEN

ENTRY

BED

BATH DEN

BED

NOTE: IN NEW CONSTRUCTION, NFPA 72 REQUIRES A

SMOKE DETECTOR LOCATED INSIDE EACH BEDROOM

AS WELL AS A SMOKE DETECTOR ON EACH LEVEL.

Example Residential Security System Floor Plan

HARDWIRED KEYPAD

✦ One or two hardwired keypads can be used for

controlling the system.

✦ Three system status indicators:

READY, ARMED, & TROUBLE

✦ Three system supervisory indicators:

POWER, BATTERIES, & RADIO

✦ Five system mode indicators:

OFF, CHIME, HOME, AWAY & TEST

✦ 24 system sensor indicators.

✦ Location inside beauty cover for supplied sensor

identiﬁcation labels.

✦ Press to activate the automation output.

✦ Pressing clears the keypad.

✦ Pressing for two seconds sounds the mode

Beeps from the hardwired keypad(s).

✔ Off Mode: 1 “Gong”.

✔ Chime Mode: 1 “Gong” & 1 “Beep”.

✔ Home Mode: 1 “Gong” & 2 “Beeps”.

✔ Away Mode: 1 “Gong” & 3 “Beeps”.

✔ Test Mode: 1 “Gong” & 4 “Beeps”.

✦ Emergency and ﬁre alarm can be triggered from

the keypad at any time.

✎ UL NOTE: For personal emergency use only. Not

for use as a UL Listed Medical Alert System.

WIRELESS KEYPAD

✦ For controlling the system remotely.

✦ Green operation light.

✦ Internal 9-volt battery is monitored by the Control

Panel.

✦ Keypad's beeper will buzz during transmissions

when the battery is low.

✦ Up to 3 years battery life (depends on frequency

of activation). (UL tested for 1 year minimum.)

✦ Sends hourly status reports to the Control Panel.

✦ Press to activate the automation output.

✦ Pressing clears the keypad.

✦ Pressing for two seconds sounds the mode

Beeps from the hardwired keypad(s).

✔ Off Mode: 1 “Gong”.

✔ Chime Mode: 1 “Gong” & 1 “Beep”.

✔ Home Mode: 1 “Gong” & 2 “Beeps”.

✔ Away Mode: 1 “Gong” & 3 “Beeps”.

✔ Test Mode: 1 “Gong” & 4 “Beeps”.

✦ Emergency and ﬁre alarm can be triggered from

the wireless keypad at any time.

✎ UL NOTE: For personal emergency use only. Not

for use as a UL Listed Medical Alert System.

ABOUT SENSOR STATUS SUPERVISION

All DXS Format sensors transmit hourly status reports. All DXT

Format sensors do not transmit hourly status reports. Both sensor

formats can be used with the system.

When a sensor is programmed into the Control Panel, the system

will set the sensor as non-supervised or supervised. Sensors set

as non-supervised are not expected to send hourly status reports.

Sensors set as supervised are expected to send hourly status

reports. If a status report is not received in 8 hours from a sensor

set as supervised, the RADIO indicator will ﬂash.

When sensors are programmed into the Control Panel, ALL

STATIONARY SENSORS ARE SET AS SUPERVISED, ALL

PORTABLE SENSORS ARE SET AS NON-SUPERVISED.

If stationary DXT Format sensors have been programmed into the

Control Panel, be sure to change their setting to non-supervised

to prevent RADIO indications. This will not prevent low battery

monitoring.

If portable DXS Format sensors have been programmed into the

Control Panel, and the installation requires supervision for speciﬁc

portable sensor(s), change the selected portable sensors setting to

supervised.

After programming the sensors, if changes are required, refer to

“Changing a Sensors Supervision” on Page 30 for details on

changing the way a sensor’s supervision is set.

3. OVERVIEW OF KEYPADS

HARDWIRED

KEYPAD

WIRELESS

KEYPAD

1 BEAUTY COVER

★ The beauty cover snaps open and shut to hide the keypad’s keys, mode and

supervisory indicators, and the sensor location labeling area.

2 KEYPAD

★ Backlit keys for easy viewing in low light conditions.

★ For entering the user's user code (numerically or alphabetically).

★ Used when programming system options.

★ Press to activate the Automation Output.

★ Press to clear keypad if the wrong key is pressed.

★ Press for two seconds to view sensor battery and supervisory status (see

BATTERIES and RADIO indicator description).

3 24-HOUR BUTTONS

★ Pressing FIRE for two seconds sounds the ﬁre siren and sends a “ﬁre” message

to a central monitoring station through the digital communicator (if the system

is monitored).

★ Pressing EMERGENCY for two seconds sounds the emergency siren and sends

an “emergency” message to a central monitoring station through the digital

communicator (if the system is monitored).

★ Both work even when system is disarmed.

★ IMPORTANT: For personal emergency use only. Not for use as a UL Listed

Medical Alert System.

4 SYSTEM SUPERVISORY INDICATORS

★ Shows the current status of the system.

POWER LIGHT

★ Glows when AC power is on.

★ Blinks when AC power is off and backup battery is installed.

★ Blinks when the backup battery is low, recharging or missing.

★ Off when AC power is off and no backup battery is installed (system disabled).

BATTERIES LIGHT

★ Blinks when one or more sensors have a low battery.

★ Press for two seconds to view sensor status. Sensor status indicator for any

sensor with a low battery will light along with the BATTERIES indicator.

★ Switch to Test Mode after replacing the sensor battery and completely test the

system (see Test Mode). Switching to Test Mode clears the low battery indication.

RADIO LIGHT

★ Blinks when one or more sensors have not reported status during the eight hour

status time period.

★ Press for two seconds to view sensor status. Sensor status indicator for any

sensor that has not reported in will light along with the TROUBLE indicator.

★ Switch to Test Mode after servicing the sensor and completely test the system

(see Test Mode). Switching to Test Mode clears the trouble indication.

5 MODE INDICATORS

★ The indicators next to the mode keys light to show the current system mode.

★ HOME indicator will blink during Secure Exit and Home Instant modes.

★ AWAY indicator will blink during the exit delay in the Away Mode.

6 MICROPHONE (OPTIONAL)

★ Location for the high sensitivity microphone included with the Model RSM-2

speaker/microphone kit.

★ Detects room audio when communicator is reporting to the Central Station

in 2-way audio mode (Model VB-2 digital voice response module and RSM-2

speaker/microphone kit must be installed).

7 SENSOR STATUS INDICATORS

★ Blacked-out sensor status indicators are only visible when lit.

★ Indicate the status of each of the system's wireless sensors and hardwired

loops.

★ Indicators show which doors and windows are open.

★ Indicators ﬂash to display sensors that have caused an alarm.

★ Stick-on labels are provided to identify the custom sensor locations.

8 SYSTEM STATUS INDICATORS

★ Shows the current status of the system.

READY LIGHT

★ Lights when all system sensors are closed.

★ Shows that the system is ready to be armed.

★ The system can be armed without the READY indicator being lit, if sensors are

bypassed either manually or automatically.

ARMED LIGHT

★ Blinks during the exit delay.

★ Lights when the system is fully armed.

TROUBLE LIGHT

★ Lights when the system has detected supervisory trouble.

★ Supervisory trouble can be caused by power, sensor low battery, or sensor radio

supervision conditions.

★ Press for one second then view the system supervisory and status indicators

to determine the origin of the trouble.

9 MODE BUTTONS

★ Used to operate the system.

OFF

★ Off Mode disarms the system.

★ Switching to Off Mode stops the alarm siren.

✓ Multiple Beeps sound and sensor status indicators ﬂash if an alarm has

occurred.

☞ Multiple Beeps mean caution. AN INTRUDER MAY STILL BE PRESENT.

CHIME

★ Chime Mode disarms the system.

★ Switching to Chime Mode stops the alarm siren.

✓ Multiple Beeps sound and sensor status indicators ﬂash if an alarm has

occurred.

☞ Multiple Beeps mean caution. AN INTRUDER MAY STILL BE PRESENT.

★ Chime Mode is for monitoring doors and windows.

✓ Use this mode as an “automatic door chime” when at home.

✓ Opening any protected door or window causes the keypad(s) to “ding-dong”.

HOME

★ Home Mode arms the perimeter sensors, but not the interior sensors.

✓ Use this mode when anyone is staying behind.

✓ Interior motion detectors and interior door sensors are not armed.

✓ Home secure mode makes all delayed perimeter sensors instant.

✓ Secure exit mode starts an exit delay while remaining in Home Mode.

✓ Re-entering during the exit delay restarts the exit delay (one time only).

AWAY

★ Away Mode arms the entire system.

✓ Use this mode when leaving home.

✓ Door sensors set for delayed will have a time delay that allows the user to

leave and enter the premises without sounding the alarm.

✓ Re-entering during the exit delay restarts the exit delay (one time only).

✓ Entry Delay Beeps warn the user to disarm the system before the siren

starts.

TEST

★ Test Mode is for testing the system sensors.

✓ All sensor status lights blink when the Test Mode is entered.

✓ Each sensor status light will stop blinking when its sensor is tested.

★ Hold the TEST button down to test all of the keypad's indicator lights.

10 SOUNDER

★ Makes unique sounds for burglary, ﬁre and emergencies.

★ Alarm sirens stop automatically after ﬁve minutes.

★ Sounds advisory tones to conﬁrm keystrokes from the keypad.

★ Sounds mode selection tones.

★ Sounds alarm memory tones.

★ Beeps when Automation Output is activated.

★ The Control Panel has terminals available for an external siren.

11 SPEAKER (OPTIONAL)

★ Location for the speaker included with the Model RSM-2 speaker/microphone

kit.

★ Sounds voice operating prompts and audio from the Central Station (Model

VB-2 digital voice response module and Model RSM-2 required).

4. HARDWIRED KEYPAD FEATURES

1 BATTERY FUSE

★ Type 2AG, 3-amp fuse for the backup battery.

★ If the keypad's POWER light is ﬂashing and the optional backup battery is

installed and charged, check this fuse.

✎ WARNING: For continued protection against the risk of ﬁre, replace only

with the same type and rating of fuse.

2 CONDUIT KNOCKOUTS

★ Four cabinet knockouts are provided for wiring using conduit.

★ The 3/4" knockouts ﬁt standard 3/4" conduit ﬁttings.

3 WIRING ACCESS SLOT

★ Provides access for wiring through a hole in the mounting wall.

★ Route cables for power, telephone, external speaker, etc. through this slot.

4 MAIN TERMINAL BLOCK

★ Terminals for hardwired loop inputs.

★ Terminals for Automation Output to connect to an automation controller.

★ Terminals for external relay output for “dry” contacts (Form C, normally open/

normally closed, 1 amp @ 24 volts maximum).

★ Terminals for fused auxiliary 12 volt output and common ground.

★ Terminals for connection to one or two Model DUAL 824KP keypads.

★ Terminals for connection to the plug-in AC transformer.

5 AUXILIARY FUSE

★ Type 2AG, 1-amp fuse.

★ Protects the auxiliary power output and siren driver circuit.

★ Fuse will blow when load exceeds 1 amp total.

✎ WARNING: For continued protection against the risk of ﬁre, replace only

with the same type and rating of fuse.

6 TELEPHONE TERMINAL BLOCK

★ Provides telephone connections for the digital communicator.

★ Provides telephone connection for voice prompted telephone remote control

(optional VB-2 digital voice response module required).

★ Provides seized ring and tip connections for local telephone instruments.

Communicator will disconnect local telephones while on-line.

7 WALL-MOUNT KEYHOLE SLOTS

★ Four slots used when mounting Control Panel to the wall.

★ Used as a template for the Control Panel when it is mounted to the wall.

8 DIGITAL VOICE RESPONSE MODULE (OPTIONAL)

★ The Model VB-2 gives the Control Panel's digital communicator listen-only,

manual 2-way and full duplex 2-way audio capability with the Central Station.

★ The module allows remote command of the system using a standard pushbutton

telephone, on or off site.

★ The module provides optional voice prompts from the keypad(s) (Model RSM-2

speaker/microphone kit required for each keypad).

9 ANTENNA KNOCKOUT

★ A cabinet knockout is provided for mounting an external antenna connector.

★ For an external antenna, use Linear's Model LA-P antenna kit.

★ The antenna kit can also be used to connect the Control Panel to co-ax for a

remote antenna.

10 ANNUNCIATOR VOLUME CONTROL

★ Varies the volume of the advisory tones that come from the keypad(s) speaker

when the Model RSM-2 speaker/microphone kit is installed in the keypad.

★ Does not affect keypad's sirens (they are always full volume).

11 RADIO TEST POINTS

★ Used to monitor the Control Panel's radio receiver during troubleshooting.

★ Provides connection for an audio ampliﬁer to listen to the receiver's output.

★ Helpful to determine sources of radio interference.

12 ANTENNA TERMINALS

★ Antenna and shield (ground) terminals for receiving signals from the system's

sensors.

★ Pre-wired to the Control Panel's internal wire dipole antenna.

★ Alternately connects to the Model LA-P local whip and remote antenna kit.

13 OPTIONAL BACKUP BATTERY

★ Space for 12-volt, 4 amp/hour backup battery. (Highly recommended.)

★ Backup battery is automatically charged and monitored by the Control Panel.

★ Backup battery can power the Control Panel for up to 6 hours.

★ UL NOTE: Normal estimated battery life should be 3 to 4 years.

14 REMOVABLE CABINET COVER

★ The cabinet cover can be removed for easy system wiring and setup.

★ Two screws secure cabinet cover when closed.

★ An optional cabinet lock can be installed for additional security.

5. CONTROL PANEL FEATURES

SYSTEM LOCATION

✎ NOTE: Wireless sensor signals must be able to

reach the Control Panel.

✔ Try to centrally locate the Control Panel.

✔ Keep Control Panel away from large metal

appliances.

✔ Maximum recommended sensor range is 400

feet (system tested at 1000 feet).

✎ NOTE: If you don't use the wireless keypad, a

hardwired keypad should be easily accessible to

the usual entrance.

✔ When the Control Panel is set in the Away

Mode, the user has 30 seconds to switch to

Off Mode before the burglary siren sounds.

✎ NOTE: Make sure a hardwired keypad is in a place

where the alarm can be heard during the night hours.

✔ Optional remote external sirens (up to 150

feet from the Control Panel) can be used to

make alarms louder and remote the sound

location.

1. Locate the Control Panel near a 115 VAC outlet

that's not controlled by a light switch.

2. Locate the Control Panel near a telephone outlet

(if using the digital communicator).

WALL MOUNTING

1. Use the Control Panel's case bottom as a

template and mark the locations for the four

mounting screws.

2. Mark the wiring access slot if the wiring is being

routed from behind the cabinet.

3. Use a hole saw to cut out the location for the

wiring access slot (if used) or punch out selected

cabinet wiring knockouts for conduit wiring.

4. Use four screws and appropriate screw anchors

to mount the unit to the wall.

EXTERNAL ANTENNA

✦ Linear's Model LA-P antenna kit can be used

with the DUAL 824P Control Panel to replace the

standard internal antenna.

✦ The antenna can be mounted on the cabinet,

or the kit can be used to connect to co-ax for a

remote antenna.

1. Remove the two standard white antenna wires

attached to the ANT and SHIELD terminals.

2. Punch out the antenna knockout.

3. Mount the antenna connector in the antenna

knockout.

4. Route the antenna co-ax down to the Control

Panel's antenna connector.

5. Connect the antenna's co-ax center conductor to

the ANT terminal.

6. Connect the antenna's co-ax shield to the SHIELD

terminal.

7. Route the two antenna ground wires as shown.

6. CONTROL PANEL INSTALLATION

USE THE CASE BOTTOM

AS A TEMPLATE TO MARK

THE FOUR KEYHOLE

MOUNTING HOLES

FOR RECESSED WIRING,

MARK WIRING SLOT, THEN

CUT OUT HOLE WITH

DRYWALL SAW

FOR CONDIUT WIRING,

PUNCH OUT REQUIRED

KNOCKOUTS AND INSTALL

3/4" CONDUIT HUBS IN

HOLES

PUNCH OUT ANTENNA

KNOCKOUT AND

INSTALL LA-P ANTENNA

CONNECTOR INTO HOLE

CONNECT CO-AX

SHIELD TO SHIELD

TERMINAL AND CO-AX

CENTER CONDUCTOR

TO ANT TERMINAL

INSTALL THE WHIP

ANTENNA AND ROUTE

THE TWO GROUND

WIRES AS SHOWN

Altri manuali per Security DUAL 824

Indice

Altri manuali Linear Pannello di controllo

Linear

Linear 2GIG Go!Control GC2 Manuale utente

Manuali Pannello di controllo popolari di altre marche

RDZ

RDZ PC-HRX Manuale utente

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Manuale tecnico

Efka

Efka Variocontrol V810 Manuale utente

Cebora

Cebora 208-10 Manuale utente

AMX

AMX AutoPatch CP-15 Manuale utente

Satel

Satel CA-6 KLED-S Manuale utente

Evolution

Evolution IQ plus 800 Manuale utente

Fagor

Fagor 8040 TCO CNC Manuale utente

Trane

Trane ComfortLink II XL950 Control Manuale utente

AKO

AKO PROCool AKO-17635-2 Manuale utente

ABB

ABB 6136/30M-101 Manuale utente

Telikou

Telikou BK-603 Belt Pack Manuale utente

Mapei

Mapei Mapeheat Thermo Touch Manuale utente

Bosch

Bosch D9412GV4 Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Manuale utente

Sminn

Sminn BOX L VF1L EI Manuale utente

Balboa

Balboa TP600 Manuale utente

Nice

Nice HSCU1 Specifiche tecniche