LINK-MI LM-TV09S Manuale utente

LM-TV09S

LM-TV Serial Irregular

Video Wall controller

User Manual

Catalog

1th Device installation..................................................................................................................................................2

2th Software Communication Settings.......................................................................................................................... 3

3th Software Key Functions...........................................................................................................................................6

4th image Debugging..................................................................................................................................................... 8

5th Buttons and Remote Control Instructions.......................................................................................................... 14

6th Serial Port Control Code.................................................................................................................................... 15

1th Device installation

1, the installation instructions

In order to save your precious time, this manual does not introduce common sense of common use of

electrical appliances, please follow the common sense of common electrical appliances;

Before using the device, please read the operating instructions carefully so that you can quickly

become familiar with the commissioning and use of the device.

2, the installation steps

1. Connect the HDMI output of the splicing processor to the HDMI input port of the liquid crystal

display unit, and each display unit can be connected to any HDMI output port of the splicing processor;

2. Connect the signal source to be displayed to any one of the HDMI, VGA, and BNC interfaces, or

insert the U disk to play the video or picture in the U disk;

3. For the first time, set the special-shaped splicing processor. It needs to be connected to the RJ-

45 serial port of the manufacturer through the serial cable, and then connected to the RJ-45 socket of

the splicing processor through the network cable.

Theinstallation diagram is as follows:

3, power on

After the above cables are connected, plug in the 100-240V AC power supply, turn on the power

switch of the device, the power indicator light is red, and the device is in working state;

2th, Product Description

The LM-TV09S is a very flexible shaped splicing processor. It can make a creative irregular splicing for

horizontal screen. The biggest feature of the product is that it can freely capture any part of the input

signal to a single LCD unit through remote control.

The product supports 1 HDMI, 1 VGA, 1 USB, 1 VIDEO signal input, and supports customized multiple

HDMI signal output. The input and output resolution up to 1920x1080@60HZ.

3th, Main Functions

2.1, Grab an arbitrary image

The remote control can be used to zoom in on any part of the input signal to the LCD screen display, as

shown below:

2.2, Signal inputs

The device is equipped with 1 channel HDMI, 1 channel VGA, 1 channel VIDEO, and 1 channel USB signal

input. Users can select the input signal source according to their needs.

2.3, Customizable multi-output on one machine

A single machine can be customized to multiple outputs, each output is intercepted according to the

different arrangement of the liquid crystal screen to display corresponding parts to the corresponding

liquid crystal unit to form a personalized shaped mosaic, that is, irregular splicing (the screen can be placed

discretionarily, at any interval position, and the size of the screen can be inconsistent) . As shown below:

2.4, Vertical or Horizontal irregular splicing

Support irregular splicing for both vertical or horizontal when using a vertical screen rotator.

2.5, Multi-angle shaped stitching

Adding an arbitrary angle rotator(in developing) to the front end of the LM-TV09S profiled splicer can

achieve more irregular splicing (multi-angle rotation profile splicing), such as tilting 45 degree / 30 degree

splicing. As shown in the following figure:

2.6, Mirror Function

LM-TV09S shaped splicer can freely mirror left and right for each LCD screen, mirror up and down you,

and flip 180 degrees, so as to achieve personalized mirror stitching, as shown in the figure:

4th Software Communication Settings

For the first time, the alien splicing processor needs to be debugged by software according to the

actual arrangement of the LCD screen. Before the debugging, the control software and the device need

to communicate normally. The following is the communication setting mode:

1. Open the S oftware folder inside the CD and copy it to the computer hard disk, open the

VideoWallcontrol.exe file inside, and then pop up the following interface;

2. Click the Setting button at the top of the interface to pop up the serial port. The port is as follows:

3. After selecting the computer com port connected to the device, click OK, and then click Connect at the

top of the interface, the computer can be controlled by the alien splicing processor.

3th Software Key Functions

For the first operation, you need to be familiar with the function of each button of the control

software. The following methods are described:

Setting: set the serial port number

Connect: Connect the serial port

Disconnect: Disconnect the serial port

1920x1080: Set the output resolution

Save: Save the settings of the settings

Load: call the saved setup parameters

▽:Language settings

Buttons in the Input group:

HDMI: One button to switch to HDMI signal input;

VGA: One button to switch to VGA signal input;

AV: One-touch switch to composite video signal input;

USB: Switch to USB video

Output group button

HDMI: Switch to HDMI mode output;

DVI: Switch to DVI mode output;

Reset: splicing processor reset;

Splice: splicing off / on

Add info: ID information off / on

Main part

X: Enter the horizontal X starting point of the image;

Y: Enter the vertical Y starting point of the image;

Width: scales the width of the input image;

Height: scales the height value of the input image;

Sub: Part

X: the horizontal X starting point of the captured image;

Y: the longitudinal Y starting point of the captured image;

Width: the width of the captured image;

Height: the height of the captured image;

ID: ID number of the desired control display unit;

5th image Debugging

Note: This description describes the special-shaped splicing debugging method, but because the

special-shaped splicing is different from the regular splicing, it takes a certain time in the actual operation

to fine-tune the image to achieve the best effect of the splicing. The following is an example of the splicing

operation steps:

1. Connecting serial port

1.1 Click the Setting button at the top of the interface to pop up the serial port settings port as shown

below:

1.2 Select the computer com port number connected to the device and click OK, then click Connect at the

top of the interface, the computer can be controlled by the alien splicing processor.

2. Input an image signal to the screen splicing processor, preferably using a notebook to copy the output,

so that the image coordinate position can be compared and referenced during the debugging process

(you can use the grid image provided by the manufacturer to better help debug the screen);

2.1 First insert the U disk provided by the manufacturer. The method of opening is to press the UA4 button

of the remote control or the USB button of the chassis. Find the picture through the up, down, left and

right of the remote control, click OK to select the picture, press the PLAY button to play the picture,

press the pause again.

3. To complete the debugging of one of the following special-shaped 2 stitching as an example: (This

image is HDMI signal input, the debug image is the above USB input as an example)

5. Define the signal input to the splicing processor as an image with a length of 1920 pixels and a height of 1080 pixels. The

upper left corner is the starting point 0 of the horizontal X and the vertical Y, as shown in the following figure:

3.2, Estimate the starting point of the coordinates and the width and height of the image as follows:

Indice

Altri manuali LINK-MI Controllori

LINK-MI

LINK-MI LM-TV02-4K2K Manuale utente

LINK-MI

LINK-MI LM-TV04U Manuale utente

LINK-MI

LINK-MI LM-TV04M Manuale utente

LINK-MI

LINK-MI LM-TV14 Manuale utente

LINK-MI

LINK-MI LM-TV04-4K2K Manuale utente

LINK-MI

LINK-MI LM-TV24 Manuale utente

LINK-MI

LINK-MI LM-TV06 Manuale utente

LINK-MI

LINK-MI LM-TV04B Manuale utente

LINK-MI

LINK-MI LM-TV04H Manuale utente

LINK-MI

LINK-MI LM-TV25 Manuale utente

LINK-MI

LINK-MI LM-TV03-4K2K Manuale utente

LINK-MI

LINK-MI LM-TV16 Manuale utente

LINK-MI

LINK-MI LM-TV09M Manuale utente

LINK-MI

LINK-MI LM-TV18 Manuale utente

LINK-MI

LINK-MI LM-TV12 Manuale utente

LINK-MI

LINK-MI LM-TV12P Manuale utente

LINK-MI

LINK-MI LM-TV08 Manuale utente

LINK-MI

LINK-MI LM-TV09P Manuale utente

LINK-MI

LINK-MI LM-TV08P Manuale utente

LINK-MI

LINK-MI LM-TV09-4K2K Manuale utente

LINK-MI

LINK-MI LM-TV04S Manuale utente

LINK-MI

LINK-MI LM-R90U Manuale utente

LINK-MI

LINK-MI LM-TV09 Manuale utente

LINK-MI

LINK-MI LM-TV08-4K2K Manuale utente

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente