LINK-MI LM-MXS16 Manuale utente
Professional Matrix Switching System
LM-MXS16
Instruction Manual
Before using this product, please read the instructions
first and keep it properly
Contents
Contents
Chapter 1. Preface...............................................................2
Chapter 2. Notices...............................................................3
Chapter 3. Product Introduction....................................................4
Chapter 4. System Parameters ....................................................5
Chapter 5. Packaging and panel and keys.............................................6
5.1. Matrix packing list................................................6
5.2. Structural representation..........................................6
5.3. Panel description..................................................7
5.4. Remote control button..............................................8
Chapter6. Installation Instruction ..................................................9
6.1. Signal connection..................................................9
6.2. RS232 communication interface connection...........................9
6.3. RJ45 for TCP/IP control ...........................................9
6.4. RJ45 for RS232 control ...........................................10
6.5. Power connection..................................................10
Chapter7. Communication Control Protocol.......................................11
7.1. TCP/IP control....................................................11
7.2. RS232 control.....................................................11
7.3. Communication control protocol....................................11
Chapter8. Operating Instructions................................................13
Chapter9. Control Software ....................................................15
Chapter10. Common Faults And Maintenance......................................16
Chapter11. Warranty Description................................................17
Preface
Chapter1. Preface
• Welcome to choose our products, thank you for the support of our
products ! For the safety both of yourself and the equipment ,
please read the instruction manual carefully before using this
equipment.
• Products are covered with a fragile label, please preserve it
carefully which will serve as the warranty certificate.
• Please read this guide first when you have any problems;The text
has a detailed description of the device operation.If you still have
questions, please contact us and we will give you a satisfactory
answer as soon as possible.
• If this manual has a version changes, we will not inform you
specially, thank you for your understanding and cooperation!
Chapter2. Notices
In order to ensure the reliable use of the equipment and personnel safety,
please observe the following items when installing, using and maintaining:
2.1 • Do not use this product in the following places: dust, fumes, conductive
dust,corrosive gas and combustible gas places; exposure to high temperature,
dew,rain occasion; vibration or shock situation; electric shock, fire and
misoperation will result in product damage and deterioration；
2.2 • In the end of the installation work, the need to ensure that there is no
foreign
body on the ventilation surface, including dust and other packaging
items,otherwise it may result in poor heat dissipation during operation,
causing fire and error；
2.3 • To avoid of wiring and plug a electric cable plug, which would easily
lead to
electric shock or cause damage to the circuit；
2.4 • Installation and wiring must be solid and reliable, poor contact may lead
to misoperation；
2.5 • For applications in interference is serious, input or output high
frequency signal cable should be shielded cable, in order to improve the
anti-jamming performance of the system; the external power supply must be
completely cut off, to carry out the installation and wiring operation,
otherwise it may cause electric shock or damage to equipment；
2.6 • This product is grounded through the grounding wire of the power supply
line. In order to avoid the electric shock, the grounding wire must be
connected with the earth；
2.7 • Please do not touch the terminal when the power is on,which may cause
electric shock and misoperation；
2.8 • Please tighten and cleaning the terminals when the power is off,These
operations may cause an electric shock when energized;
2.9 • After the power supply is closed, the connection or removal of the
communication signal cable, the cable connection of the expansion module or the
control unit, or the removal of the device can result in equipment damage and
misoperation；
2.10 • Do not disassemble the equipment to avoid damage to the internal
electrical
components；
2.11 • Be sure to read this manual to fully confirm the safety, then the
program
change, commissioning, start and stop operation. If you can not solve the
problem, please contact us.
Product Introduction
Chapter3. Product Introduction
3.1 • Matrix switcher is a professional switching device embedded
intelligent control of a high performance, for the audio and
video input signal synchronous switch to any output channels of
audio and video;
3.2 • The unique processing method is adopted, which greatly improves
the switching speed of the device. Support a variety of control
methods,flexible operation switch, is widely used in radio and
television engineering, multimedia conference hall, large
screen display works,TV teaching, command and control center;
3.3 • Interface bandwidth 3.4Gbps (total bandwidth 10.2Gbps),support
the highest resolution3840*2160@30Hz;
3.4 • Support HDCP1.4revision, provides outstanding security and
digital content protection capabilities;
3.5 • Support fast switching operation; support infrared remote
control;
• The input and output board support card function, can be hot
swappable;
3.6 • Supports basic matrix control instructions and basic matrix
functions；
• With power down memory function, with power off site protection
function;
3.7 • Flexible control mode, with the crystal button panel operation,
but also provides 2 standard RS-232 communication interface and
RJ45 port,compatible with a variety of environments,
user-friendly and a variety of remote control equipment with
the use of;
One RJ45 interface use RS232,It is a serial port;
One RJ45 interface use TCP/IP,it is LAN port;
3.8 • Built in International standard power;
3.9 • Full metal chassis compatible with standard 19 inch cabinet;
3.10 • Support user defined matrix front panel LCD screen standby and
control software LOGO;
3.11 • Support HDCP can decode Blue ray DVD and so on the
corresponding equipment.
System Parameters
Chapter4.System Parameters
Matrix Specification
Input numbers
4/8/12/16/20/24/28/32
Output numbers
4/8/12/16/20/24/28/32
Input card(Number）
1/2/3/4/5/6/7/8
Output card(Number)
1/2/3/4/5/6/7/8
Signal interface
HDMI、DVI - D、VGA
HDMI protocol
Support HDCP1.4 and HDMI1.4,compatible with the
DVI1.0
Bandwidth
3.4Gbps（total 10.2Gbps，each color 3.4Gbps）
HDMI resolution Max.
3840x2160@30Hz
DVI resolution Max.
1920x1200@60Hz
VGA resolution Max.
1920*1080@60Hz
Clock jitter
<0.15Tbit
Bit rise time
<0.3Tbit（20% - 80%）
Bit drop time
<0.3Tbit（20% - 80%）
Maximum transmission delay
5ns（±1ns）
Switching speed
200ns（Max.）
Signal intensity
T.M.D.S +/-0.4Vpp
Impedance
50Ω
Input EDID
EDID can read and write
The maximum input distance
1920x1080@60hz@less then 30 meters(good cable)
The maximum output
distance
1920x1080@60hz@less then 20 meters(good cable)
Serial port version
RS232、Panel key、Remote
LAN port version
TCP/IP、RS232、Panel key、Remote
Baudrate and protocol
Baudrate：9600,data bits：8bits,stop：1,no parity
RJ45 serial port
1 = TX,2 = RX,5 = GND
Power input
AC100 - 240V，50/60hz
Temperature
Storage and use temperature: -20° ~ +70° C
humidity
Storage and use humidity:10% ~ 90%
Size
2U/3U/7U with standard 19 inch box
Mean time between failures
30000hours
Packaging and panel and keys
Chapter5. Packaging an panel and keys
5.1. Matrix packing list
Name
Unit
Numbers
Matrix switcher
pcs
1
AC power cable cord
pcs
1
RS232 Serial communication cable
pcs
1
User manual
pcs
1
Data CD
pcs
1
5.2. Structural representation
Size：
Model
Length
A（mm）
B（mm）
C（mm）
D（mm）
LM-MXS8
480
88
310
440
LM-MXS16
480
132
310
440
LM-MXS32
480
308
320
440
Packaging and panel and keys
5.3. Panel description(LM-MX16 as an example)
Packaging and panel and keys
5.4. Remote control button
Name
Function
SWITCH
AV switch
MENU
System menu
SOURCE
System setting
Exit
OK
ok
‖>
All channel
AUTO
VGA auto
0
0
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
Connection Diagram
Chapter6. Connection Diagram
Explain:
1.LM-MXS8 is a customizable with card insert matrix,which supports 8
numbers signal inputs and outputs;
2.HDMI supports the HDCP1.4 protocol. Maximum support 3840*2160@30Hz,
maximum input lenth can reach 30 meters, the maximum output lenth can
reach 20 meters (using high quality wire);
3.The control methods can be choose RS232 control, network TCP/IP
control, APP control, BS Architecture Web control, etc. the control
mode can be customized according to customer needs.
Indice
Altri manuali LINK-MI Commutatore a matrice
LINK-MI
LINK-MI LM-MXS8 Manuale utente
LINK-MI
LINK-MI LM-HD808 Manuale utente
LINK-MI
LINK-MI LM-MX88B Manuale utente
LINK-MI
LINK-MI LM-MX44U Manuale utente
LINK-MI
LINK-MI LM-MX05 Manuale utente
LINK-MI
LINK-MI LM-MX42B-4K2K Manuale utente
LINK-MI
LINK-MI LM-MX42-AUDIO Manuale utente
LINK-MI
LINK-MI LM-MX42-4K2K Manuale utente
LINK-MI
LINK-MI LM-HD808-4K Manuale utente
