LINK-MI LM-SH41 Manuale utente
HD Quad Video Multiplexers
LM-SH41
Usre Manual
1
HD Quad Video Multiplexers
Operating Instructions
Table of Contents
1, Installation Notes……………………………………………… 2
2,Product Introduction…………………………………………… 5
3, Machine installation…………………………………………… 9
4, Remote Control Description………………………………… 10
5, Key Instructions……………………………………………… 13
6, Software Control……………………………………………… 14
7, The control codes……………………………………………… 20
2
1th . Installation Notes
For your safety and equipment security, please be sure
reading the safety instructions carefully before using the
machine.
If you have doubts in the use, please read this manual first.
Described in detail in the body of the device operation. If you
still have questions, please contact us, we will give you a
satisfactory answer as soon as possible.
Specifications subject to release to change without notice,
please understand.
When installing, please note the following:
1, power supply:
Please use with protection to single-phase three-wire AC
100-240V power supply, and ensure that the entire engineering
system using the same protected. You can not use unprotected
power, the power cord ground pin can not be destroyed.
2, Power:
When you need to move equipment or other work must outage,
to shut off all power, including the power switch, unplug the
power plug, so as to ensure the safety of your equipment.
3, Cable:
The items can not put pressure on the power supply lines,
signal lines, communication lines, cable should keep from
trample or extrusion, to prevent the risk of leakage or short
circuit.
4, Signal cable:
Inserting or pulling the signal line to the device, the device
needs outage, so as not to damage the device. Hot plug caused
damage not covered under warranty.
3
5, Vents:
The outer surface of the device may have openings for heat
dissipation, do not block these openings, in order to avoid heat
build-up, the risk of damage to the equipment or cause fire.
6, Equipment placement:
Should a reasonable settlement for devices such as standard
rack mount, chassis, cabinets, or placed on a stable flat work
surface to prevent the unit from dropping.
7, surroundings:
Equipment working environment should pay attention to dust,
moisture, in particular, to prevent the liquid from soaking and
splashing into the interior of the device.
8, service:
All repairs should be done by qualified service personnel ,
untrained Never attempt to repair equipment. To prevent the
risk of electric shock, do not open the cabinet.
9, Safety Precautions:
9.1, the internal high-voltage equipment, non-professional
maintenance personnel shall not open the case, to avoid danger;
9.2, non-dripping or splashing, prohibited place any container
with liquid items on the device;
9.3, for the prevention of fire,forbiding a device near the
fire;
9.4, for adequate ventilation, equipment should be maintained
at least20CM void of the front and rear panels;
9.5, devices should be immediately unplug the power cord and
handled by professional maintenance personnel such as eerie
noise, smell or smoke;
9.6,In the case of lightning or unused for long periods, unplug
4
the power cord;
9.7, not stuffed any object to ventilation holes of the device
to avoid damage to the equipment or electric shock;
9.8, not to place the device near water or other damp places;
9.9, the device should not be placed near heat sink or other
high temperature places;
9.10, properly organize the power cord to prevent breakage;
9.11, the following conditions should unplug the device power
cord, handled by qualified service personnel:
1) the power cord is damaged or frayed;
2) When the liquid has been spilled into the device;
3) The device is dropped or the cabinet damaged;
4) This device malfunction or significant performance changes.
5) Regularly check the fan whether is working properly, if the
fan does not work you should turn off the device and disconnect
the power supply immediately,and by professionals to deal with;
This device is not suitable for non-professionals to operate
the debugger, users are subject to professional training and
guidance.
Please read carefully before using and this manual should be
properly preserved for later use.
5
2th . Product Introduction
1 product description
is a high-performance HD quad video multiplexers, the main
function is to enter the 4-way BNC, VGA, HDMI signals into one
HD HDMI and VGA output, make four digital signals at the same
time displayed on a high-definition display unit, and to
achieve HDMI signal and a USB device (such as a mouse, keyboard)
synchronous switching. HD Quad video multiplexers support
projectors, LCD, DLP, plasma, full-color LED display unit etc
with high-definition interface.
HD video multiplexers is currently use a relatively large
number of standard products on the market, products are mainly
used in video conferencing, teaching, exhibition, stock where
need a single display unit simultaneously display multiple HD
signals
Meanwhile, Quad video multiplexers is the only one on the
market to increase USB Salvo, when a computer signal is switched
to full-screen by button or remote control, the corresponding
host computer USB Salvo, reach to functional requirements of
video conference the needs of Salvo mouse, keyboard.
2 The main function
support a single display unit simultaneously display four
high-definition or analog signals;
4 composite video, 4-channel VGA, 4-way HDMI,in total
12-channel signal input;
1 channel HDMI and 1 VGA output synchronously;
4-way USB signal inputs, 2 USB signal output, USB connection
support mouse and keyboard;
6
can achieve USB mouse and keyboard with video image switch
synchronization, realize KVM function;
compatible with various input signal resolution, supports
1920 * 1080 ultra-high resolution output signal;
support PIP, POP, window, overlay, roam, images of any
size and location ;
support transparency adjustment of image, you can see the
bottom image through the above picture;
widely support 90V ~ 264V AC input, can be common to any
country worldwide;
standard 19-inch 1U wire drawing chassis, directly on
standard cabinet;
support chassis buttons, IR remote control, RS-232 serial
control and in control;
High-quality HD Quad video multiplexers tailored
Designed for video projects；
7
3 System topology
4 Machines pictures and size
8
5 HD video multiplexers Specifications
Name
Specification
HDMI/DVI input
Input port
4BNC、4VGA、4HDMI、4USB
Resolution
Support 1920*1080 ultrahigh highest
resolution and downward compatibility
all kinds of resolutions
Color depth
24bit,1677 ten thousand
Zoom and display
unlimited
Video input
Identify pattern
automatic
Image adjust
Move、transformate、brightness、contrast、
color temperature;
output
interface
1 HDMI 、 1VGA synchronic output;2USB
connect mouse 、 keyboard or other
equipment
Resolution
1920*1080/60HZ,can customize downward
this resolution
frequency
60HZ
Color depth
24bit,1677 ten thousand
Control mode
RS232、IR、case key
Control software
HD video multiplexers professional
control sofeware
voltage
AC 90~260V
dimension
442mm(L)*45mm(H)*242mm(W)
Power
No more than 15w
9
3th . Machine installation
1 Unpacking
Check the host and accessories. Including the host, CD, power
cable, remote control, warranty card, manual.
2 Install the machine
Setting display unit : HD Quad video multiplexers support
1 VGA and 1 HDMI output synchronization, if you use HDMI input,
set input signal to HDMI of the display unit; if the user using
a VGA port input, TV set to VGA.
output port with display unit is connected: completing
placing the video multiplexers, the signal output via HDMI
cable or VGA cable docking with the display unit
Input Signal Connection: Via HDMI cable ,VGA cable or video
line connect the computer or other signal source output devices
with splitter input port
3. Power on
After finishing connecting the cables that we have talked
above , insert the 100~240V AC power supply, turn the machine,
if the power LED is red, the device is in working condition;
Indice
Altri manuali LINK-MI Multiplexer
