Link EXT40-4KUHD Manuale utente
LINK EXT40-4KUHD
4K@60 4:4:4 HDR HDBaseT Extender
User Manual
Version: V1.0.1
1
Important Safety Instructions
1. Do not expose this apparatus to
rain, moisture, dripping or splashing
and that no objects lled with liquids,
such as vases, shall be placed on the
apparatus.
2. Do not install or place this unit
in a bookcase, built-in cabinet or in
another confined space. Ensure the
unit is well ventilated.
3. To prevent risk of electric shock or
fire hazard due to overheating, do not
obstruct the unit's ventilation openings
with newspapers, tablecloths,
curtains, and/or similar items.
4. Do not install near any heat
sources such as radiators, heat
registers, stoves, or other apparatus
(including amplifiers) that produce
heat.
5. Do not place sources of naked
flames, such as lighted candles, on
the unit.
6. Clean this apparatus only with dry
cloth.
7. Unplug this apparatus during
lightning storms or when unused for
long periods of time.
8. Protect the power cord from being
walked on or pinched particularly at
plugs.
9. Only use attachments / accessories
specied by the manufacturer.
10. Refer all servicing to qualified
service personnel.
2
Table of Contents
Introduction������������������������������������������������������������������������������������������������� 3
Overview ................................................................................................. 3
Features .................................................................................................. 4
Package Contents ................................................................................... 4
Specication ............................................................................................ 5
Transmitter ......................................................... ............................... 5
................................... 7
Receiver .........................................................
Panel Layout ........................................................................................... 9
............................... 9
Transmitter ........... ..............................................
Receiver ......................................................... ..................................11
Installation Instructions��������������������������������������������������������������������������� 13
IR Pass Through ................................................................................... 15
RS232 Pass Through ............................................................................ 17
Trouble Shooting �������������������������������������������������������������������������������������� 18
Steps of Regular Troubleshooting Routine....................................... 18
Typical Questions ............................................................................. 19
Warranty Terms and Conditions ������������������������������������������������������������� 21
3
Introduction
Overview
LINK EXT40-4KUHD is a slim HDBT transmitter receiver set with HDCP 2.2
compliant. It supports resolutions up to 4K@60Hz 4:4:4 8bit, transporting Ultra
HD/4K video with HDR, audio, bi-directional IR and power up to 131ft (40m) and
1080P signals up to 230ft (70m) over a single CATX cable.
EXT40-4KUHD features bi-directional PoCC, requiring only one
power adapter connected to either transmitter or receiver to power both units. Bi-
directional IR pass through allows users to control the source at the display location
or control the display at the source location with ease. RS232 pass through
supports serial communication.
The transmitter and receiver are easy to install. They are space saving and offer
ideal solutions for homes, ofces, digital entertainment centers, control centers,
conference rooms, schools and corporate training environments.
4
•Supports HDMI 2.0 with 4K@60Hz 4:4:4 8bit and HDCP 2.2
• Supports HDR (High Dynamic Range) format
• Over a Cat 6a/7 cable, HDMI signal transport up to 230ft (70m) at 1080P and
131ft (40m) at 4K@60Hz (4:4:4)
• Over a Cat 5e/6 cable, HDMI signal transport up to 197ft (60m) at 1080P and
115ft (35m) at 4K@60Hz (4:4:4)
•Bi-directional PoCC, one power supply at either transmitter or receiver side
can power both units
• Supports bi-directional IR/RS232 pass through
•Slim profile, space saving and easy-to-install
Features
Package Contents
•1 x Transmitter
•1 xReceiver
•1 x Power Supply (DC 18V 1A)
•1 x IR Emitter
•1 x Broadband IR Receiver (30-50 KHz)
•1 x IR-AC IR Coupler Cable
•2 x Phoenix Male Connector (3.5mm, 3 Pins)
•4 x Mounting Bracket
5
Technical
Input 1 x HDMI IN
Input Signal Type HDMI with HDCP 2.2
Input/Output Resolution Supported
SMPTE:
1280x720P1,2,3,4,5,6,7,8, 1920x1080I6,8,
1920x1080P1,2,3,4,5,6,7,8, 3840x21602,3,5,6,8,
4096x21602,3,5,6,8
VESA:
800x6008, 1024x7688, 1280x7688,
1280x8008, 1280x9608, 1280x10248,
1360x7688, 1366x7688, 1400x10508,
1440x9008, 1600x9008, 1600x12008,
1680x10508, 1920x12008
1 = at 23.98 Hz, 2 = at 24 Hz, 3 = at 25 Hz, 4
= at 29.97 Hz, 5 = at 30 Hz, 6 = at 50 Hz, 7 =
at 59.94 Hz, 8 = at 60 Hz
Maximum Data Rate 18 Gbps
Input Video Level 0.5-1.0 V p-p
Maximum Pixel Clock 600MHz
Output 1 x HDBT
Output Signal Type HDBT
Video Impedance 100ohms
Specification
Transmitter
6
General
Operating Temperature 0°C to 45°C (32°F to 113°F),
10% to 90%, non-condensing
Storage Temperature -20°C to 70°C (-4°F to 158°F)
10% to 90%, non-condensing
Humidity 10% to 90%, non-condensing
Power Supply DC 18V 1A
Power Consumption (Max) 4.8W
Device Dimension
(W x H x D)
5.39'' x 0.61'' x 2.93''
(136.8 mm ×15.4 mm × 74.5 mm)
Product Weight 0.53lb (0.24kg)
Certication CE, FCC
Cable Specification:
Note: LINK recommends the use of T568B straight-through Category cables.
Cable Type Range Supported Video
HDMI
49ft (15m) 1080P@60Hz
33ft (10m) 4K@30Hz
10ft (3m) 4K@60 Hz 4:4:4 8 bit with HDR
CAT5e/6
197ft (60 m) 1080P@60Hz 36 bpp
115ft (35 m)
1080P@60Hz 48 bpp
1080P@60Hz 3D
4K@60 Hz 4:4:4 8bit with HDR
CAT6a/7
230ft (70 m) 1080P@60Hz 36 bpp
131ft (40 m)
1080P@60Hz 48 bpp
1080P@60Hz 3D
4K@60Hz 4:4:4 8bit with HDR
7
Technical
Input 1 x HDBT
Input Signal Type HDBT
Input/Output Resolution Supported
SMPTE:
1280x720P1,2,3,4,5,6,7,8, 1920x1080I6,8,
1920x1080P1,2,3,4,5,6,7,8, 3840x21602,3,5,6,8,
4096x21602,3,5,6,8
VESA:
800x6008, 1024x7688, 1280x7688,
1280x8008, 1280x9608, 1280x10248,
1360x7688, 1366x7688, 1400x10508,
1440x9008, 1600x9008, 1600x12008,
1680x10508, 1920x12008
1 = at 23.98 Hz, 2 = at 24 Hz, 3 = at 25 Hz, 4
= at 29.97 Hz, 5 = at 30 Hz, 6 = at 50 Hz, 7 =
at 59.94 Hz, 8 = at 60 Hz
Maximum Data Rate 18 Gbps
Input Video Level 0.5-1.0 V p-p
Maximum Pixel Clock 600MHz
Output 1 x HDMI
Output Signal Type HDMI with HDCP 2.2
Video Impedance 100ohms
Receiver
8
General
Operating Temperature 0°C to 45°C (32°F to 113°F),
10% to 90%, non-condensing
Storage Temperature -20°C to 70°C (-4°F to 158°F)
10% to 90%, non-condensing
Humidity 10% to 90%, non-condensing
Power Supply DC 18V 1A
Power Consumption (Max) 7.4W
Device Dimension
(W x H x D)
5.39'' x 0.61'' x 2.93''
(136.8 mm ×15.4 mm × 74.5 mm)
Product Weight 0.53lb (0.24kg)
Certication CE, FCC
Cable Specification:
Note: LINK recommends the use of T568B straight-through Category cables.
Cable Type Range Supported Video
HDMI
49ft (15m) 1080P@60Hz
33ft (10m) 4K@30Hz
16ft (5m) 4K@60 Hz 4:4:4 8 bit with HDR
CAT5e/6
197ft (60 m) 1080P@60Hz 36 bpp
115ft (35 m)
1080P@60Hz 48 bpp
1080P@60Hz 3D
4K@60 Hz 4:4:4 8bit with HDR
CAT6a/7
230ft (70 m) 1080P@60Hz 36 bpp
131ft (40 m)
1080P@60Hz 48 bpp
1080P@60Hz 3D
4K@60Hz 4:4:4 8bit with HDR
9
Front Panel
No� Name Description
1Power LED
(Red)
On: The transmitter is powered on.
Off: The transmitter is powered off.
2Status LED
(Blue)
Blinking: The transmitter is working properly.
Off: The transmitter is not working properly.
3HDCP LED
(Blue)
On: HDMI signal is HDCP protected.
Blinking: HDMI signal is not HDCP protected.
Off: No HDMI signal pass through.
4Link LED
(Green)
On: The link between transmitter and receiver is normal.
Blinking: The link between transmitter and receiver is
abnormal.
Off: No link.
Panel Layout
Transmitter
1 2 3 4
Indice
Altri manuali Link Estensione
