4
Safety Precautions
Read and follow all safety instructions before using the equipment. Save these instructions for later use.
Warning: to guard against injury, basic safety precautions should be observed, including the following:
1. Danger – to avoid possible electric shock, special care should be taken as water is used with
the ECP. For each of the following situations, do not attempt repair to the ECP by yourself, con
tact Linkam or an authorised Linkam dealer for service.
2. If the ECP shows any sign of abnormal water leakage during use, immediately unplug it from the
power source. Contact Linkam Technical Support.
3. If the plug or power socket does get wet, DON’T unplug or handle the cord. First ask for mains
power to be turned off, then unplug and examine for presence of water in the receptacle.
4. Do not operate the ECP if it has a damaged cord or plug or if it is malfunctioning or has been
dropped or damaged in any manner.
5. Always unplug the ECP from an outlet when not in use or before cleaning or re-filling it with
water.
6. Never pull the cord to pull out the power plug from the socket. Grasp the plug and pull to discon-
nect.
7. Do not use the ECP for other than intended use.
8. The ECP is for indoor use only. It is designed for use at temperatures from 5~40°C, 80% relative
humidity at 31°C decreasing linearly to 50% at 40°C (without condensation)
9. Read and observe all important notices on the ECP.
10. If an extension cord is necessary, a cord with proper rating should be used. A cord rated less
amperes or watts than the ECP rating may overheat. Care should be taken to arrange the cord so
that it will not be tripped or pulled.
11. If for any reason the mains fuse needs to be replaced then it must be replaced by one of the same
type and rating as shown in the equipment ratings.
12. Always consult your local safety regulations when using any electrical equipment.
