LINKLITE A90S Manuale utente
SAFETY INSTRUCTIONS
To reduce the risk of fire, electric shock, or injury, please read these instructions before
use.
1. This product is only intended for household use, including similar use in hotels.
2. Please place this product on a stable, level, and non-slippery surface.
3. Do not use this product in wet surroundings, such as in the bathroom, near a shower
or a swimming pool.
4. Do not let the water run into the product or spill any water onto the product.
5. Make sure the power adapter does not get wet when in use.
6. Only use the ORIGINAL adapter and USB cable provided.
7. Do not use this product as a means of reducing your sleeping time. This product aims
to help you wake more easily instead of diminishing your need for sleep.
MAINTENANCE AND CARE
1. Please clean the product with a dry and soft cloth.
2. Do not use abrasive cleaning agents, pads, or cleaning solvents like alcohol, acetone,
etc., as this might damage the surface of the product.
3. lf the product will not be used for an extended period of time, please unplug the power
adapter from the socket, then store the product in a safe and dry place where it will
not be crushed, banged, or subject to damage.
WHAT'S In The Box
Smart Wake Up Light User ManualAdapter
Smart Wake-Up Light
User Manual
PRODUCT OVERVIEW
INSTALLATION &GETTING STARTED
Connect the Wake-up Light to power with the Adapter provided.
LED Light
UP
FM Radio
WiFi
LED Display
Snooze
Down
Bluetooth
Adaptor Input
Alarm 2
Sleep Aid
USB Output
Button Cell
Compartment
Alarm 1
Time Setup/LED
Display Mode
Speaker
FM Antenna
lmportant:
1. This product has no power on/off button, and it will be on once you plug the power
adapter into the socket. To disconnect power, unplug the power adapter.
2. Loosen the tie that wraps the FM Antenna, then unroll the wire for receiving strong
signals when turning on the FM Radio.
OPERATION GUIDE
Note:
The Wake-up Light will automatically save the current setting and exit from setting mode
if the operation is not resumed within 15s.
Time
Before the first use, please set the time.
Step 1: Press and hold for 2 seconds until the Hour starts to flash on the LED display.
Step2:Press to change the Hour, then press to confirm and switch to Minute.
Step3:Press to change the Minute, then press to confirm and switch to 12/24H.
Step3:Press to change 12/24H, then press to confirm.
If the 12-hour clock format is selected, PM or AM will be displayed accordingly.
Brightness of the LED Display
Press to toggle the brightness of the LED Display from 0% -10%-30%-50%-100%.
Alarms
You could set Alarm 1 and Alarm 2 with the wake-up light. Alarm 3 and Alarm 4 could be
set in the app Smart Life. We will take setting Alarm 1 as an example to guide you how to
set an alarm.
Step1: Press for 2seconds until the icon and the Hour start to flash on the LED
display.
Step2:Press to change the Hour, then press to confirm and switch to Minute.
Step3:Press to change the Minute, then press to confirm and switch to ringtone
Setting.
Step4:Press to select your favorite ringtone for Alarm 1, then press to confirm
Volume Setting
OFF: Ringtone off
S-01 to S-07:Nature sounds
F-08:The last FM station you were tuned to before turning off the radio. If you prefer
another station, please turn on the FM radio to search and select the one you like, then set
the alarm again.
Step5: Press to adjust the ringtone volume,then press to confirm and start the
Sunrise.
U-01 to U-20: Volume levels
Step6: Press to adjust the brightness level for the light, then press to confirm and
start setting the sunrise time to turn on the light before the alarm rings.
L-00: Light off
L-01 to L-20: Brightness levels
Step7: Press to select the sunrise time from 10, 20, 30, 40, 50 and 60 MIN, then
press to confirm and complete all the settings for Alarm 1.Alarm 1 is on after setup.
lf you select 10MIN and the alarm time is 7:00 AM, the light will be on at 6:50 AM and
gradually become brighter.When the alarm rings at 7:00 AM, the brightness level of the
light will reach the level you set at Step 6.
Snooze
When the alarm rings, press to activate Snooze Mode to delay the alarm for 9 minutes.
1. You can snooze up to 5 times.
2. Press the corresponding Alarm Button to manually stop the alarm.
3.If you don't respond to it within 15 minutes after the alarm rings, the alarm will automati-
cally stop for this time.
FM Radio
Step1: Press to ON/OFF
Step2: Press and hold for 2 seconds,and wait for the wake-up light to automatically
search FM stations.Available stations will be saved as P-01,P-O2, etc., in sequence.
Step3: Press and hold to switch among the stations saved.
Step4:Press to adjust the volume.
U-01 to U-20: Volume levels
Note: Please fully unwind the antenna and move it around until you receive the best
reception.
Bluetooth
Step1: Press and hold for 2 seconds to turn on Bluetooth
Step2: Press to pause the music.
Step3: press and hold for 2 seconds to the next song
Step4: Press to adjust the volume
U-01 to U-20: Volume levels
Notes:
1. Bluetooth On/Bluetooth Off is with Bluetooth switch prompt sound
2. If the device has been connected with other devices before, the Bluetooth will automati-
cally open.
Sleep Aid
Sleep Aid simulates the process of sunset, aiming to help you fall asleep easily.After it's
enabled, the sunset light will gradually dim, and the volume of the selected nature sound
will decrease with time.
Step1: Press and hold for 2 seconds, then press to select a timer from10 MIN to
120 MIN.
Step2:Press to confirm your selection, then press select your favorite sound to
help you sleep.
OFF: sound off
s-01 to S-07: Nature sounds
F-08: The last FM station you were tuned to before turning off the radio. If you prefe
another
station, please turn on the FM radio to search and select the one you like, then set the
alarm again.
Step3:Press to confirm your selection, then press to adjust the volume of the
sound.
U-01 to U-20: Volume levels
Step6: Press to confirm your selection, then press to adjust the brightness level
of the light.
L-01 to U-20: Brightness levels
Step7: Press to confirm your selection and complete all the setting for Sleep Aid.Sleep
Aid is enabled after setup.
Press to disable Sleep Aid.
Light
Bedside Light
Step 1: Double press to turn on the monochrome mode,
Step 2:Short Press to manually change the color of the light one by one and 7 colors
are available.
Step 3: Press and hold to adjust the brightness level.
1% to 100%: Brightness levels
Atmosphere Light
Step 1: press and hold for 2 seconds to turn on the atmosphere mode,
Step 2: Short Press to manually change the color of the light one by one and 6 modes
are available.
The eighth mod is MIC function，according the Bluetooth.
CONNECT TO YOUR MOBILE DEVICE
Step 1: Download Smart Life into your mobile device on App Store/Google Play, or scan
the QR code below.
Step 2: Create an account and log in.
Step 3:Connect the Device to Your Phone
Please power on your wake-up light first, press and hold WiFi button for 15S the WiFi icon
will flash quickly.
Step 1: Tap Add Device Step 2: Tap Auto Scan
Step 3: Enable permissions for scanning
devices, and tap Start scanning.
Step 4: Tap Next after your wake-up
light is found.
Indice
