Linksys G Manuale utente
A Division of Cisco Systems, Inc.
®
Model No.
Wireless
1
Quick Installation Guide
WPC54G (EU)
Notebook Adapter
Wireless-G
GHz
2
802.11g
4
,
Package Contents
• Wireless-G Notebook Adapter
• One Setup CD-ROM
• One User Guide on CD-ROM
• Quick Installation Guide
2
1
The Wireless-G Network Adapter is
installed and set up using the Setup
Wizard that comes on the CD
enclosed.
ATo begin, insert the Setup
Wizard CD-ROM into your CD-
ROM drive. The Setup Wizard
should run automatically, and
the Welcome screen should
appear.
BTo install the Adapter, click
Click Here to Start on the
Welcome screen.
CAfter reading the License
Agreement, click Next to
continue the installation and
Windows will begin copying the
files onto your PC.
DThe Setup Wizard will now
prompt you to install the
Adapter in your PC.
Proceed to Step 2.
Begin Installation
A
C
IMPORTANT: Do not install the Adapter in Your PC
until you are instructed to do so in Step 2 or the
Adapter will not install propertly.
3
2
Now that the Setup Wizard has
prompted you to install the Adapter,
follow the instructions below.
ALocate an available CardBus
slot on your notebook PC.
BWith the connector pin end
facing the CardBus slot and
the label facing up, slide the
Adapter into the CardBus slot
until it locks in place.
CWindows 98 and Windows Me
users may need to restart their
PCs again when prompted to
do so.
DThe Power LED should light up
when the Adapter is installed
correctly.
EWindows will begin copying the
driver files to your computer. If
Windows asks you for the origi-
nal Windows CD-ROM, insert
the CD-ROM, and direct Win-
dows to its correct location
(e.g., D:\).
FOnce the Adapter is con-
nected and the Setup Wizard
appears on your screen, click
Next on the Connecting the
Adapter screen to proceed.
Proceed to Step 3.
Connect the Adapter
Connecting
the Adapter
4
The next screen to appear will be the
Available Wireless Network screen.
From this screen, you can launch
one of the two setup methods.
Setting Up the Adapter with
Available Networks
On the Available Wireless Network
screen, the available networks are
listed in the center table by SSID.
Select the wireless network you wish
to connect to and click the Connect
button. (If you do not see your net-
work listed, you can click the Refresh
button.)
3Set Up the Adapter
IMPORTANT:There are two ways to set up the Adapter. For Quick Installation,
use this document only if your network appears on the Available Wireless Net-
work screen.
Manual Setup: If you are utilitizing Manual Setup, click the Manual Setup button and
follow the on-screen prompts.
Available Wireless Network
5
WEP Key Needed
If the network utilizes wireless security,
you will need to configure security on
the Adapter. If not, you will be taken
directly to the
Congratulations
screen,
shown in Step B.
A
If wireless security has been
enabled on this network, you will
see a wireless security screen. If
your network utilizes WEP (Wired
Equivalent Privacy) encryption,
the
WEP Key Needed for Connec-
tion
screen will appear. If your net-
work utilizes WPA-Personal
encryption, the WPA-Personal
Needed for Connection
screen
will appear.
WEP Key Needed for Connection
Select
64-bit or 128-bit
.
Enter a passphrase or WEP key.
Passphrase
- Enter a passphrase
in the
Passphrase
field. This is
case-sensitive and should not be
longer than 16 alphanumeric
characters. It must match the
passphrase of your other wireless
network devices.
WEP Key
- The WEP key must
match the WEP key of your wire-
less network. For 64-bit encryp-
tion, enter exactly 10
hexadecimal characters. For 128-
bit encryption, enter exactly 26
hexadecimal characters. Valid
hexadecimal characters are “0”
to “9” and “A” to “F”.
Then, click
Connect
and pro-
ceed to Step B.
6
WPA-Personal
Linksys is a registered trademark or trademark of
Cisco Systems, Inc. and/or its affiliates in the U.S.
and certain other countries. Copyright © 2005
Cisco Systems, Inc. All rights reserved.
wpc54g-v7-qig-51117 TE
NOTE:
After the Adapter is installed, the
Wireless Network Monitor screen will open
and its icon will appear in your PC’s system
tray. Double-click the icon if you want to
open the Wireless Network Monitor for find-
ing available wireless networks or making
additional configuration changes.)
Wireless Network
Monitor icon
Needed
WPA-Personal for Connection
Encryption
- Select the type of
algorithm you want to use,
TKIP
or
AES,from the Encryption
drop-
down menu.
Passphrase
- Enter a Passphrase
of 8-63 characters in the
Pass-
phrase
field.
Then, click
Connect
and pro-
ceed to Step B.
B
After the Adapter has been con-
figured for the network, the
Con-
gratulations
screen will appear.
Click
Connect to Network
to con-
nect to your network.
Congratulations! Setup is complete.
For additional information or troubleshooting help,
refer to the User Guide on the Setup CD-ROM. You
can also call or email for further support.
Website
http://www.linksys.com/international
Registration
http://www.linksys.com/registration
A Division of Cisco Systems, Inc.
®
A Division of Cisco Systems, Inc.
®
Modelnr.
Wireless
1
Installationsvejledning
WPC54G (DK)
Notebook-netværkskort
Trådløs-G
GHz
2
802.11g
4
,
Pakkens indhold
• Trådløs-G Notebook-kort
• Én installations-cd-rom
• Én brugervejledning på cd-rom
• Installationsvejledning
2
1
Trådløs-G-netværkskortet installeres
og konfigureres ved hjælp af den
guidede konfiguration på den
medfølgende cd.
APlacer først cd-rom'en med
guidet konfiguration i
cd-rom-drevet. Den guidede
konfiguration køres automatisk,
og skærmbilledet Welcome
(Velkommen) vises.
BKlik på knappen Click Here to
Start (Klik her for at starte) på
skærmbilledet Welcome
(Velkommen) for at installere
kortet.
CNår du har læst licensaftalen,
skal du klikke på Next (Næste)
for at fortsætte installationen.
Derefter overfører Windows
filerne til din pc.
DDen guidede konfiguration
spørger, om du vil installere
netværkskortet på pc'en.
Fortsæt til trin 2.
Start installation
A
C
VIGTIGT: Installer ikke netværkskortet på din pc,
før du bliver bedt om det i trin 2 - ellers installeres
netværkskortet ikke korrekt.
3
2
Når den guidede konfiguration har
bedt dig om at installere
netværkskortet, skal du følge
nedenstående vejledning.
AFind et tilgængeligt CardBus-
stik på din notebook-pc.
BSkub netværkskortet med
tilslutningsbenet forrest og
mærkatsiden opad ind i
CardBus-stikket, indtil det klikker
på plads.
CWindows 98- og Me-brugere
bliver muligvis bedt om at
genstarte deres pc.
DLysdioden Power lyser, når
netværkskortet er korrekt
installeret.
EWindows begynder at kopiere
driverfilerne til din computer.
Hvis du bliver bedt om at
placere den originale
Windows-cd-rom i cd-rom-
drevet, skal du gøre dette og
derefter angive dens
placering, f.eks. D:\.
FNår netværkskortet er tilsluttet
og den guidede konfiguration
vises på skærmen, skal du
klikke på Next (Næste) på
skærmbilledet Connecting the
Adapter (Tilslutning af
netværkskortet) for at fortsætte.
Fortsæt til trin 3.
Tilslutning af kortet
Tilslutning af
netværkskortet
4
Det næste skærmbillede, der vises,
er Available Wireless Network
(Tilgængelige trådløse netværk). På
dette skærmbillede kan du starte en
af de tokonfigurationsmetoder.
Konfigurationaf netværkskortet
med tilgængelige netværk
På skærmbilledet Available Wireless
Network (Tilgængelige trådløse
netværk) vises en oversigt over de
tilgængelige trådløse netværk i den
midterste tabel opstillet efter SSID.
Vælg det trådløse netværk, du vil
oprette forbindelse til, og klik på
knappen Connect (Opret
forbindelse). (Hvis du ikke får vist en
oversigt over netværk, kan du klikke
på knappen Refresh (Opdater)).
3Konfiguration af netværkskortet
VIGTIGT: Der findes tomåder at konfigurere netværkskortet på. I forbindelse
med hurtig installation skal du kun bruge dette dokument, hvis dit netværk
vises på skærmbilledet Available Wireless Network (Tilgængelige trådløse
netværk).
Manual Setup:Hvisdubruger Manual Setup(Manuel konfiguration),skaldu klikkepå
knappen Manual Setup og følge vejledningen på skærmen.
Tilgængelige trådløse
netværk
Indice
Lingue:
Altri manuali Linksys Adattatore
Linksys
Linksys Wireless-G Manuale utente
Linksys
Linksys WGA11B Manuale utente
Linksys
Linksys WMCE54AG - Wireless A/G Media Center... Manuale operativo
Linksys
Linksys PAP2-T Istruzioni operative originali
Linksys
Linksys WUSB54GC EU Manuale utente
Linksys
Linksys WPC600N - Ultra RangePlus Wireless-N PC Card Manuale utente
Linksys
Linksys WUSB12 Istruzioni operative originali
Linksys
Linksys SPA2002 Manuale utente
Linksys
Linksys WGA54G Manuale utente
Linksys
Linksys USB1000 Manuale utente
Linksys
Linksys WPC54G EU Manuale utente
Linksys
Linksys WPC100 - Rangeplus Wireless G Pc Card Manuale utente
Linksys
Linksys WUSB6300 Manuale utente
Linksys
Linksys WUSB54AG Manuale utente
Linksys
Linksys WPC200 Istruzioni operative originali
Linksys
Linksys Instant PowerLine PLUSB10 Manuale utente
Linksys
Linksys WUSB54AGP Manuale utente
Linksys
Linksys SPA3102 Manuale utente
Linksys
Linksys PAP2 Manuale utente
Linksys
Linksys PLE200 - PowerLine AV EN Adapter Bridge Manuale utente
