Linksys WRT54GL - Wireless-G Broadband Router... Guida rapida

Firmware Upgrade Procedures:

Linksys WRT54GL v1

fw ddwrt_v24_sp1_std_generic_10011

1. General Information

Make: Linksys

Model: WRT54GL

Hardware Version: any

Firmware Version: ddwrt_v24_sp1_std_generic_10011

MAC Address Info:

WLAN MAC: two higher than LAN MAC.

LAN MAC: labeled on the bottom of the device.

WAN MAC: one higher than LAN MAC.

Example: if the LAN MAC printed on the device is 00:11:DE:AD:BE:EF, then

the WAN MAC is 00:11:DE:AD:BE:F0 and the WLAN MAC is

00:11:DE:AD:BE:F1.

Defaults Settings/Configuration:

Default LAN IP Address: 192.168.1.1

Web Interface Username: root

Default Web Interface Password: admin

IMPORTANT: These instructions assume that the device is already running a stock

ddwrt_v24_sp1_std_generic_10011 firmware. Do not upgrade the device to the ddwrt

firmware if it is running the original Linksys manufacturer’s firmware; instead, see the

ddwrt website for instructions on how to convert the device to run the ddwrt firmware

(you must first upgrade to a “mini” ddwrt firmware).

2. Wired Upgrade Procedure

Prerequisites:

•client computer with ethernet interface and firmware file

•ethernet cable

•device LAN IP address (referred to below as <Device_LAN_IP_Address>)

•device web interface password

Limitations: if the device is running a CB firmware, under certain situations you may

need to reference the CB User’s Manual to perform a firmware upgrade.

Firmware Filename: dd-wrt.v24_std_generic_[X].bin (where [X] is an optional

string)

Instructions:

•Connect a wired (ethernet) client with DHCP enabled to a LAN port on the device

with an ethernet cable. If you are not served an IP address by the device, you will

need to determine the device LAN IP address (see next step) and manually assign

the wired client an IP address in the same subnet as the device LAN IP address.

For example, if the device LAN IP address is 192.168.1.1, assign yourself an IP

address of 192.168.1.11.

•Determine the <Device_LAN_IP_Address>. If the device is running DHCP, the

device LAN IP address is likely the default gateway of your connected client;

otherwise, if the device LAN IP address is not the default LAN IP address listed

above, the device LAN IP address can be retrieved in wireless sniffer capture data

(e.g., kismet).

•Log on to the device’s web interface by opening a web browser and pointing it to

http://<Device_LAN_IP_Address>, where “<Device_LAN_IP_Address>” is the

device IP address determined from the previous step (i.e., not the literal string

“<Device_LAN_IP_Address>”). For example, if the <Device_LAN_IP_Address>

is 192.168.1.1, use http://192.168.1.1.

•At the login prompt, enter the web interface password and click OK.

•Then click the “Administration” link on the upper right tab.

•Then click the “Firmware Upgrade” tab.

•Click the “Browse…” button and browse to the dd-wrt.v24_std_generic_[X].bin

firmware file on the client computer.

•Click the “Upgrade” button.

•Watch the interface for any additional steps/error messages/information.

Reboots Automatically After Upgrade: Yes

Approximate Upgrade Time: 130 seconds

Known Issues: None

3. Wireless Upgrade Procedure

Prerequisites:

•client computer with 802.11 wireless client card (or built-in 802.11 client

hardware).

•wireless encryption (WEP, WPA, or WPA2) key (if wireless security is enabled)

•device LAN IP address (referred to below as <Device_LAN_IP_Address>)

•device web interface password

Limitations: None

Firmware Filename: dd-wrt.v24_std_generic_[X].bin (where [X] is an optional string)

Instructions:

•Connect/associate the wireless (802.11) client computer (with DHCP enabled) to

the device. If wireless encryption (WEP, WPA, or WPA2) is enabled on the

device, enter the key when prompted. If you are not served an IP address by the

device, you will need to determine the device LAN IP address (see next step) and

manually assign the wired client an IP address in the same subnet as the device

LAN IP address. For example, if the device LAN IP address is 192.168.1.1,

assign yourself an IP address of 192.168.1.11.

•Determine the <Device_LAN_IP_Address>. If the device is running DHCP, the

device LAN IP address is likely the default gateway of your connected client;

otherwise, if the device LAN IP address is not the default LAN IP address listed

above, the device LAN IP address can be retrieved in wireless sniffer capture data

(e.g., kismet).

•Log on to the device’s web interface by opening a web browser and pointing it to

http://<Device_LAN_IP_Address>, where “<Device_LAN_IP_Address>” is the

device IP address determined from the previous step (i.e., not the literal string

“<Device_LAN_IP_Address>”). For example, if the <Device_LAN_IP_Address>

is 192.168.1.1, use http://192.168.1.1.

•At the login prompt, enter the web interface password and click OK.

•Then click the “Administration” link on the upper right tab.

•Then click the “Firmware Upgrade” tab.

•Click the “Browse…” button and browse to the dd-wrt.v24_std_generic_[X].bin

firmware file on the client computer.

•Click the “Upgrade” button.

•Watch the interface for any additional steps/error messages/information.

Reboots Automatically After Upgrade: Yes

Approximate Upgrade Time: 130 seconds

Known Issues: None

Altri manuali per WRT54GL - Wireless-G Broadband Router...

Indice

Altri manuali Linksys Router di rete

Linksys

Linksys Instant Broadband Series Manuale utente

Linksys

Linksys EF1324 Manuale utente

Linksys

Linksys BEFVP41 - EtherFast Cable/DSL VPN Router Manuale operativo

Linksys

Linksys BEFSR11 - EtherFast Cable/DSL Router Manuale utente

Linksys

Linksys E7350 Manuale utente

Linksys

Linksys EF3508 Manuale utente

Linksys

Linksys BEFSR41 - EtherFast Cable/DSL Router Manuale utente

Linksys

Linksys BEFSX41 - Instant Broadband EtherFast Cable/DSL Firewall... Istruzioni operative originali

Linksys

Linksys XAC Series Manuale utente

Linksys

Linksys RVS4000 Manuale utente

Linksys

Linksys MAX-STREAM EA 7300 Manuale utente

Linksys

Linksys WET11 - Instant Wireless EN Bridge Network... Istruzioni operative originali

Linksys

Linksys RTP300 - Broadband Router With 2 Phone Ports Manuale utente

Linksys

Linksys RT31P2-VU Istruzioni operative originali

Linksys

Linksys WET200 - Wireless-G Business Ethernet Bridge Istruzioni operative originali

Linksys

Linksys SLM2008 Manuale operativo

Linksys

Linksys BEFSR11 - EtherFast Cable/DSL Router Guida

Linksys

Linksys BEFVP41 - EtherFast Cable/DSL VPN Router Manuale utente

Linksys

Linksys SFE2010P Manuale operativo

Linksys

Linksys EtherFast EF4124 Manuale utente

Linksys

Linksys BEFSR41W Manuale utente

Linksys

Linksys MAX-STREAM EA8300-EU Manuale utente

Linksys

Linksys BEFSR11 - EtherFast Cable/DSL Router Manuale utente

Linksys

Linksys WAG120N Manuale utente

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza