The wall adaptor provided with the unit is connected to the
MAESTRO power inlet. The line operatin volta e of this hi h
performance power supply can ran e from 100V – 240V. The
mains plu conforms to the sockets used in the destination country.
Should for any reason you decide to use a different power supply,
be sure it can deliver 15V DC, re ulated @ 2A. The supply jack is a
female type 5.5mm/2.1mm, tip is positive. We advice users that
usin a different power supply than the one included in the
packa e will void the warranty: No warranty claim will be
acknowled ed for dama es due to the use of a power supply
different from the one included in the packa e.
Once the power supply is connected, the blue LED should li ht up
when the power switch is operated. Turn off the unit and do the
si nal connections accordin to fi ure 1 + 2. Start by connectin a
line level source to one of the inputs on the rear. Due to the fully
symmetrical si nal routin inside the MAESTRO, a balanced source
is preferable. Nevertheless, a sin le ended source connected to the
RCA input works equally well. Select the proper input. Now, connect
a power amplifier to one of the rear outputs or a headphone to
one of the front outputs. Select the proper output. When everythin
is connected, turn on and have fun!
When plu in your headphones into the MAESTRO, please
make sure that the volume control is set at minimum. Adjust
the level for the first time, when some music is playin . Listenin
to music throu h headphones at much hi her levels than
normal is a common phenomenon: be aware that exposin
your ears to hi h sound pressure levels for an extended
amount of time dama es your hearin permanently.
!
