LINOVISION IOT-G65 Manuale utente

IOT-G65 LoRaWAN Gateway

Quick Start Guide

Hangzhou Linovision Co., Ltd.

Welcome

Thank you for choosing IOT-G65 LoRaWAN Gateway.

This guide teaches you how to install the IOT-G65 and how to log in the web GUI to configure

the device.

Declaration of Conformity

IOT-G65 is in conformity with the essential requirements and other relevant provisions of the

CE, FCC, and RoHS.

For assistance, please contact

Linovision technical support:

Email: sales@linovision.com

Tel: 86-571-8670 8175

Website:www.linovision.com

CONTENT

1. Packing Listg List.....................................................................................4

2. Hardware Introduction.........................................................................4

2.1 Overview......................................................................................... 4

2.2 Dimensions (mm)............................................................................5

2.3 LED Indicators................................................................................ 5

2.4 Reset Button.................................................................................... 6

3. Hardware Installation........................................................................... 6

3.1 SIM Card Installation...................................................................... 6

3.2 Ethernet Cable & Power Cable Installation....................................6

3.3 Antenna Installation........................................................................ 7

3.4 Gateway Mounting..........................................................................7

4. Access the Web GUI of IOT-G65.........................................................9

4.1 Web Access via Ethernet Port.........................................................9

5. Connect IOT-G65 to the Network..................................................... 11

5.1 Configure the WAN Connection...................................................11

5.2 Configure the Wi-Fi Connection...................................................12

5.3 Configure the Cellular Connection............................................... 14

6. Packet Forwarder Configuration.......................................................15

7. Network Server Configuration...........................................................17

7.1 Connect IOT-G65 to Cloud...........................................................17

7.2 Connect IOT-G65 to Other Platform............................................ 19

1. Packing Listg List

Before you begin to install the IOT-G65 LoRaWAN Gateway, please check the package

contents to verify that you have received the items below.

If any of the above items is missing or damaged, please contact sales representative.

2. Hardware Introduction

2.1 Overview

A. Front Panel

1 × IOT-G65

1 × Ethernet Cable

1 × DC Jack Power Adapter

1 × Mounting Bracket

Bracket Fixing Screws

&Grounding Screw

Wall Mounting Kits

1 × Warranty Card

1 × LoRa Antenna

(Optional)

1LED Area

POWER: Power Indicator

STATUS: System Indicator

LoRa: LoRa Indicator

Wi-Fi: Wi-Fi Indicator

LTE: Cellular Indicator

ETH: Ethernet Port Indicator

2LoRa Antenna Connector

(only for external antenna version)

B. Rear Panel

2.2 Dimensions (mm)

2.3 LED Indicators

LED

Indication

Status

Description

POWER

Power Status

Off

The power is switched off

The power is switched on

STATUS

System Status

Blue Light

Static: the system is running properly

Red Light

The system goes wrong

LoRa

LoRa Status

Off

Packet Forwarder mode is running off

Blue Light

Packet Forwarder mode is running well

Wi-Fi

Wi-Fi Status

Off

Wi-Fi is disabled

Blue Light

Wi-Fi is enabled

LTE

Cellular Status

Off

SIM card is registering or fails to register

(or there are no SIM cards inserted)

Blue Light

Blinking slowly: SIM card has been registered and is

ready for dial-up

Blinking rapidly: SIM card has been registered and

is dialing up now

3Bracket Mounting Screws

4SIM Slot

5Type-C Port

6Ethernet Port (PoE)

7Power Connector

8Reset Button

9Waterproof Silicone

10 Cable Groove

Static: SIM card has been registered and dialed up

successfully

ETH

Ethernet

Port Status

Off

Disconnected

Blue Light

Static: Connected

2.4 Reset Button

Function

Description

STATUS LED

Action

Reset

Static Blue

Press and hold the reset button for more than 5 seconds.

Static Blue →

Rapidly Blinking

Release the button and wait.

Off → Static Blue

The gateway resets to factory default.

3. Hardware Installation

3.1 SIM Card Installation

IOT-G65 does not support hot plugging, please turncut off the power before you

insert or take off cards.

A. Use screwdriver to Open the protective cover on the back panel of IOT-G65 via

screwdriver.

B. Push Insert the SIM card into the device according to the direction the icon on the device.

Note: If you need to take out the SIM card, press into the SIM card and it will pop up

automatically.

3.2 Ethernet Cable & Power Cable Installation

A. Connect the Ethernet cable and power cable to corresponding interfaces.

B. Pass two cables through the waterproof silicone and slid into the grooves.

C. Screw the protective cover back to the device.

IOT-G65 also supports 802.3af standard PoE and can be powered by PoE switch or PoE

adapter. When connecting, Ethernet cable of IOT-G65 device side should be installed first,

otherwise,or PoE devices or gateway may be damaged.

3.3 Antenna Installation

For external antenna version, rotate the antenna into the antenna connector accordingly.

The external antenna should be installed vertically always on a site with a good signal.

3.4 Gateway Mounting

The gateway can be mounted to a wall or a pole. Please complete all software configurations

before installation.

3.4.1 Wall Mounting

Preparation: mounting bracket, bracket fixing screws, grounding screw, wall plugs, wall

mounting screws and other required tools.

1. Before you start, make sure that your SIM card has been inserted, your antennas have

been attached and that all cables have been installed.

Note: Do not connect device to power supply or other devices.

2. Align the mounting bracket horizontally to the desired position on the wall, use a marker

pen to mark four mounting holes on the wall, and then remove the mounting bracket from

the wall.

Note: The connecting lines of adjacent points are at right angles.

3. Drill four holes with a depth of 32 mm by using your drill with a 6 mm drill bit on the

positions you marked previously on the wall.

4. Insert four wall plugs into the holes respectively.

5. Mount the mounting bracket horizontally to the wall by fixing the wall mounting screws

into the wall plugs.

6. Screw the bracket fixing screws to the back panel of device, then hang the device to the

mounting bracket on the wall.

7. Screw the grounding screw to fix IOT-G65 to the mounting bracket.

3.4.2 Pole Mounting

Preparation: mounting bracket, bracket fixing screws, hose clamp and other required tools.

1. Before you start, make sure that your SIM card has been inserted, your antennas have

been attached and that all cables have been installed.

Note: Do not connect device to power supply or other devices.

2.Loosen the hose clamp by turning the locking mechanism counter-clockwise.

3.Straighten out the hose clamp and slide it through the rectangular rings in the mounting

bracket, wrap the hose clamp around the pole.

4.Use a screwdriver to tighten the locking mechanism by turning it clockwise.

5. Screw the bracket fixing screws to the back panel of device, then hang the device to the

mounting bracket on the pole.

6. Screw the grounding screw to fix IOT-G65 to the mounting bracket.

4. Access the Web GUI of IOT-G65

IOT-G65 provides web-based configuration interface for management. If this is the first time

you configure the gateway, please use the default settings below:

ETH IP Address: 192.168.23.150

Wi-Fi IP Address: 192.168.1.1

Username: admin

Password: password

4.1 Web Access via Ethernet Port

Connect PC to IOT-G65 ETH port directly or through PoE adapter. The following steps are

based on Windows 10 operating system for your reference.

A. Go to “Control Panel” → “Network and Internet” → “Network and Sharing Center”, then

click “Ethernet” (May have different names).

B. Go to “Properties” → “Internet Protocol Version 4(TCP/IPv4) ”and select “Use the

following IP address”, then assign a static IP manually within the same subnet of the gateway.

C. Open a Web browser on your PC (Chrome is recommended) and type in the IP address

192.168.1.1 to access the web GUI.

D. Enter the username and password, click “Login”.

If you enter the username or password incorrectly more than 5 times, the login page

will be locked for 10 minutes.

E. When you log in with the default username and password, you will be asked to change

Indice

Altri manuali LINOVISION Portale

LINOVISION

LINOVISION IOT-G67 Manuale utente

Manuali Portale popolari di altre marche

LST

LST M500RFE-AS Manuale utente

Kinnex

Kinnex Media Gateway Manuale utente

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuale utente

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuale utente

Telsey

Telsey CPVA 500 - SIP Manuale utente

RTA

RTA 460A-NNA4 Scheda tecnica

Shaw

Shaw Gateway HDPVR Manuale utente

ABB

ABB VSN900 Guida rapida

Commander

Commander Pulse Manuale utente

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuale utente

NETGEAR

NETGEAR C6300BD Manuale utente

Amit

Amit CDW531AM Manuale utente

HMS

HMS Netbiter EasyConnect EC150 Manuale utente

Huawei

Huawei EchoLife HG620 Manuale utente

AT&T

AT&T U-verse 3801 Manuale per l'uso e la cura

Logic IO

Logic IO RTCU MX2 turbo Manuale utente

Suttle

Suttle MediaMAX MXM-521 Manuale utente