Linsar 24LED550 Manuale utente
24"
HD TV
MODEL: 24LED550
User Manual
2
TV Setting Menus 16
Quick Settings 18
Picture 19
Sound 21
Channel 23
Network 24
Time 25
System 26
Lock 27
About TV 30
TV Guide 31
Recording 32
Recording Live TV 33
Playback 33
Pause Live TV (Time-shift) 34
Contents
Unpack and Prepare 3
What's in the Box 3
Important Tips 4
Attaching the Stand 5
Wall-Mounting the TV 6
Connect to Power 7
Connect your Antenna 7
Controls and Connections 8
Get to Know your TV 8
Buttons on the TV 8
Ports on the TV 9
Remote Control 11
Setup 11
Using the Remote Control 12
Buttons & Functions 13
On-Screen Set Up 15
USB Mode 35
Set up 35
Troubleshooting 38
Product Fiche & Specications 41
Compliance and
Responsible Disposal 42
Declaration of Conformity 43
UNPACK AND PREPARE | 3
USB Mode 35
Set up 35
Troubleshooting 38
Product Fiche & Specications 41
Compliance and
Responsible Disposal 42
Declaration of Conformity 43
Unpack and Prepare
What's in the Box
Before installing your newTV, check you have everything
needed.
In the box you will find:
A. 24" HDTV
B. Remote Control
C. AAA Batteries
D. TV Stands
E. Screws forTV Stands
F. Quick Start Guide
G. General Safety Warnings
H. User Manual
You will need:
• Phillips-head screwdriver (for stand installation)
• Antenna cable (to watch liveTV)
4 | UNPACK AND PREPARE
Important Tips
• Place theTV on a level surface.
• Place theTV away from any source that may generate heat or vibrations.
• Make sure there is enough space around vents for airflow.
• The remote control works up to 5 metres away from theTV.
• Unplug theTV before cleaning it.
• Clean using a dry cloth only - do not use water or chemicals.
• Use only the power supply provided.
• It is highly recommended to use safety straps for securing theTV in place.
• Keep liquid, children and pets away from theTV at all times.
UNPACK AND PREPARE | 5
Attaching the Stand
• Unplug theTV from the power outlet before
installing or removing the stand.
• Only touch the frame, not the screen.
• It is highly recommended to use safety straps
for securing theTV.
CAUTION!
Do not apply
excessive force as
you might damage
the screw holes.
1
2
3
Unless you are wall-mounting theTV, you will need to
attach its stand/legs.
1. Lay theTV face-down on a soft, flat surface (like
the sofa, or a towel on a table) larger than theTV
itself.
2. Match stands to the installation points on the
underside of theTV.
3. Attach the stands to theTV at the installation
points using the screws provided. (Grab a
screwdriver for this bit). Make sure the legs
are facing away from each other (not leaning
inwards).
6 | UNPACK AND PREPARE
100mm
Back of theTV
100mm
Wall-Mounting the TV
TheTV comes with holes on the back panel for use
with wall-mounting brackets (bracket not included).
Use four standard M4*10mm screws (or longer,
depending on the mounting bracket) to wall-mount
thisTV (screws are not included).
• Unplug theTV from the power outlet
before wall-mounting.
• Contact a professional for assistance with
wall-mounting theTV.
• TheTV is only suitable for mounting at
heights <= 2m.
Required
• VESA Mounting
Bracket
• 4 x M4*10mm
screws (or longer
as required)
The screws in the package are for securing theTV
stand only. If you are wall-mounting theTV, consult a
qualified installer for advice on bracket support and
wall support.
UNPACK AND PREPARE | 7
Connect to Power
Don't forget to plug in the
TV to the power outlet. Leave
the power switched off until
installation is finished.
Make sure theTV is switched off at the power outlet
until you have finished connecting your cables.
Digital TV in HD (High Denition)
High Definition (HD) channels provide the best
viewing quality and are available with a digital
antenna connection.
Connect your Antenna
Antenna cable not included.
8 | CONTROLS AND CONNECTIONS
1. VOL + : Increase the volume level.
2. VOL - : Decrease the volume level
3. CH + : Select the next channel.
4. CH - : Select the previous channel.
5. SOURCE : Change the input source.
6. MENU : Enter the settings menu.
7. STANDBY: Switch theTV ON or to Standby.
Controls and Connections
1
5
3
2
6
4
7
Buttons on the TV
Get to Know your TV
On/Standby light and
Remote sensor
CONTROLS AND CONNECTIONS | 9
1USB
»PVR record and pause liveTV
»Play your stored media files (supported file codecs and extensions may vary)
»Software updates
2ANTENNA IN Connect your antenna for liveTV. (Antenna cable not included.)
3MINI YPbPr You can use this to connect component signal source. Supports high definition (HD) picture quality.
This requires a component cable (not included).
4MINI AV IN You can use this to connect your DVD player. Supports Standard Definition (SD) picture quality.
Requires an AV cable (not included).
5CI CAM (Conditional Access Module) card is connected to the CI slot, you can view related information or
manage the CAM card.
Ports on the TV
3 4 521
10 | CONTROLS AND CONNECTIONS
6RJ45 (LAN) Connect to your broadband modem using an Ethernet cable (not included).
7HDMI IN All-digital connection between theTV and any HDMI device. Supports Full HD. Requires a HDMI cable
(not included).
8PC IN Connect your PC and its Audio to yourTV. Requires VGA and AUX Cable (not included).
9SCART Connect your SCART signal source, Requires SCART Cable (not included).
10
Headphone
Jack Connect to your headphones, amplifier or audio device, using an AUX cable (not included).
11 COAX Connect an external digital audio device. Use an Coaxial cable (not included) to connect the unit with
an amplifier, soundbar or other audio decoding device for digital audio signal input.
6 7 9 10 118
Indice
Altri manuali Linsar TV ad alta definizione
