Welcome to the exciting world of Hifi kit building
Thank you for purchasing a Lint Legend 2 kit. The kit is designed to introduce you to the interesting world of basic electronics.
You will encounter vacuum tubes or valves, mosfets, voltage regulators, resistors, capacitors, transistors as well as soldering.
Some basic tools required
Obviously, some basic tools will be required, no need to go mad acquiring high end test equipment.
A decent multimeter with AC (RMS) DC voltage, current is useful and of course resistance measurement is essential.
Soldering stations are ideal but a decent 220 volt soldering iron will be adequate. If planning on building more kits, then
shell out for a nice station.
Basic hand tools, pliers, side cutters, allen keys are essential whereas and a small vice or third hand is useful.
Before you start
Take a good look at the kit materials. Don’t open the packets until ready to build. Read these instructions thoroughly
and then reflect on the assembly.
When you start the build, secure a nice clean uncluttered workspace, if using the dining room table, ensure that the work
doesn’t get disturbed. Its very annoying to have your layouts disturbed.
We are human, so please check the components values with a multimeter before assembly.
The kit is not supplied with soft solder wire, a valve or a power supply.
