Liqua K-Flex Manuale utente
K- Flex Instructions Manual
K-Flex Quadro
Rev02-220404
▪CP1 pallet must be used. No other pallet type is compatible.
▪Pallet size must be 100 x 120cm, CP1 pallets must be in good condition, free of
nails and sharp objects.
▪Cover the surface of the pallet with a carton board.
▪Pallets must have 2000kg Safety Working Load.
Rev02-220404
Pallet Selection
2
Rev02-22040433
Open the K-Flex box and ensure that the following are in the package:
1. K-Flex
2. Separator
Contents of the Box
3
Rev02-220404
▪Erect the K-Flex on a CP1 pallet.
▪Position the K-Flex to the center of the pallet.
Setup
4
Rev02-220404
Setup
5
▪Fix the elastic bands to the pallet corners.
Rev02-220404
Setup
▪Pull the loops to yourself and obtain a cubical form.
6
Rev02-220404
Setup
7
▪Position the separator at the top of the K-Flex.
▪Fasten and integrate top separator and K-Flex to each other.
Rev02-220404
Coupling
▪You will need to have a 2” coupling. (DIN EN 14 420–7)
▪Couple the hose to the valve.
▪Ready for filling.
8
▪Ensure that the valve does not get any stress at any time.
▪Start filling at low speed, 30-50lt per minute for the first 20seconds.
▪Ideal filling time is 5 minutes per 1000lt.
Rev02-220404
Filling
9
After loading;
▪Remove the hose.
▪Fasten the cap.
Rev02-220404
Filling
10
Indice
Altri manuali Liqua Attrezzatura per carri armati
Manuali Attrezzatura per carri armati popolari di altre marche
Flexcon
Flexcon FLU/H2PLU Manuale utente
Harbor Freight Tools
Harbor Freight Tools Centralpneumatic 66839 Istruzioni per il montaggio
DeVilbiss
DeVilbiss QM T-5 Series Manuale di riferimento
Regulus
Regulus PS 80 Z Manuale utente
KIESELMANN
KIESELMANN TDAM 6180 Manuale utente
Worthington
Worthington Amtrol THERM-X-TROL ST-447C Istruzioni per l'installazione