Lissmac LWSH 1201 Manuale utente

1/50

OPERATING MANUAL

WALL SAW hydraulic

LWSH1201

LISSMAC Maschinenbau GmbH

Lanzstrasse 4

D-88410 Bad Wurzach

Telefon +49 (0) 7564 / 307-0

Telefax +49 (0) 7564 / 307-500

[email protected]om

www.lissmac.com

CONSTRUCTION TECHNOLOGY

Page 2

Page 3

Safety

DANGER

Failure to comply with the safety instructions may result in serious injury or even death.

Ensure that the safety instructions have been read and understood in full.

DANGER

Cuts from the saw blade.

Always wear protective gloves when working on the wall saw, particularly when working on

the saw blade.

Always use the blade guard when operating the wall saw.

DANGER

Serious injury or material damage as a result of uncontrolled movements of the wall saw.

Never connect or disconnect hoses while the drive unit is running.



Page 4

Description

Wall saw system

Wall saw für professional use. Not suitable for use in explosion hazard environments.

Wall saw

Components

1 Feed motor, swivel 6 Blade drive motor

2 Blade guard holder 7 Saw blade holder

3 Water connection 8 Name plate

4 Feed motor, travel 9 Chassis

5 Lock unit 10 Belt swivel arm

10 9

Typ

Masch.- Nr.

Gewicht.

Index

Baujahr

10 9

Typ

Masch.- Nr.

Gewicht.

Index

Baujahr

2.1

2.2

Page 5

Assembly / disassembly

Place the wall saw on the guide rail

3.1

Page 6

Adjustment of the closure

A: Rotate as far as the stop.

B: Rotate back two notch positions.

Release the closure

Perform the remaining assembly steps in reverse order.

click

3.2

3.3

Page 7

Mount the drive motor

Mount the saw blade

DANGER

It can cause death or serious injury if the saw blade ies away.

Only use original screws and bolts.

DANGER

Serious injury can be caused by sudden start-up of the saw blade.

Switch o the drive unit before working on the saw blade.

Depressurize the hoses.

Fixing saw blade in position

The direction of rotation of the saw blade must match the direction of rotation of the machine.

Correct alignment: Countersinking of the fastening bores against the blade cover.

For normal cuts



3.4

3.5

3.5.1

Page 8

For ush cuts

Mount the blade guard

D6x

B6x

D6x

B6x

3.6

Page 9

Connecting the wall saw to the drive unit

The drive unit is isolated from the power supply.

Couplings are clean.

Hoses are undamaged.





3.7

Page 10

Servicing and maintenance

Lubricate lock unit

1 Grease nipple



Maintenance and servicing table

Before every

commissioning

At end of work

Weekly

Yearly

After faults

After damage

Wall saw Retighten loose bolts, screws and nuts

(refer to the tightening torque speci-

cations)

X X X

Prism guides Check for wearX

Replace before the anchoring screws

of the guide prisms touch the rail or

the chassis touches the rail

X

Y-guides Apply 2-3 applications of grease to

the lubricating nipples

X

Couplings Check for leak-tightness and damage

and replace as required

X

Swivel arm Clean with waterX

Check the saw blade uptake for wearX X X

Feed motor Check cleanliness and leak-tightnessX X X X

Drive motor Check cleanliness and leak-tightnessX X X X

Water economy Check water line for cleanliness and

leak-tightness

X X X

Blow out waterX

Saw blade Clean with waterX

Check for wearX X X X

Service To be performed by LISSMAC or an

authorised workshop

After 100 / 300 / 500 / 700 hours

4.1

Indice

Altri manuali Lissmac Sega

Lissmac

Lissmac DTS 901-H Manuale utente

Lissmac

Lissmac UNICUT 600 Manuale utente

Lissmac

Lissmac MULTICUT 605 SG Manuale utente

Lissmac

Lissmac Multicut 450 Manuale utente

Lissmac

Lissmac COMPACTCUT 400 E Manuale utente

Lissmac

Lissmac DTS 420 T Manuale utente

Lissmac

Lissmac UNICUT 520 Manuale utente

Lissmac

Lissmac DTS 700 Manuale utente

Lissmac

Lissmac CC401 E Manuale utente

Lissmac

Lissmac MULTICUT 900 SG Manuale utente

Lissmac

Lissmac Compactcut 900 Manuale utente

Lissmac

Lissmac LWSH 1600 Manuale utente

Lissmac

Lissmac COMPACTCUT 201 P Manuale utente

Lissmac

Lissmac ATS 120T/600 Manuale utente

Lissmac

Lissmac DTS 601 Manuale utente

Lissmac

Lissmac DTS 901-H Manuale utente

Lissmac

Lissmac ATS 450 Manuale utente

Lissmac

Lissmac DTS 402 Manuale utente

Lissmac

Lissmac CC601 E Manuale utente

Lissmac

Lissmac LWSE 540 Manuale utente

Lissmac

Lissmac DTS 271 Manuale utente

Lissmac

Lissmac Compactcut 900 P Manuale utente

Lissmac

Lissmac COMPACTCUT 905 P/T Manuale utente

Lissmac

Lissmac DTS 120 Manuale utente

Manuali Sega popolari di altre marche

RIDGID

RIDGID BS1400 Manuale utente

ATIKA

ATIKA BWS 400-2 Manuale utente

RGC

RGC FS20 Manuale utente

Makita

Makita M2300 Manuale utente

IMET Spa

IMET Spa BASIC 300 PLUS SHI Manuale utente

IMET Spa

IMET Spa SIRIO 370 AF-E Manuale utente

Optimum

Optimum OPTisaw CS 275 Manuale utente

Makita

Makita BPB180 Manuale utente

Stihl

Stihl MS 462 C-M Manuale utente

AEG

AEG TS 250 K Manuale utente

Meec tools

Meec tools 004665 Manuale utente

Makita

Makita LS1018L Manuale utente

Ryobi

Ryobi RCS1400 Manuale utente

DeWalt

DeWalt DCS391 Manuale utente

Sealey

Sealey SA72 Manuale utente

skilsaw

skilsaw SPT88 Istruzioni per il montaggio

Urrea

Urrea SI810 Dimensioni e guida di installazione

EINHELL

EINHELL BKG 210/1 Manuale utente