Lithium Cycles Super73-V2 Manuale utente
2862 Walnut Avenue, Suite D - Tustin, CA, 92780
Phone: 1.949.313.6340 • E-mail: [email protected]
1
Owner’s Manual
User manual
Assembly, Maintenance, and Warranty
Model: Super73-V2
2862 Walnut Avenue, Suite D - Tustin, CA, 92780
Phone: 1.949.313.6340 • E-mail: [email protected]
2
©Copyright 2018 Lithium Cycles, Publication 1 issue 1.
Updated September 2018
This handbook contains information on the
Super73-V2.
Always store this Owner’s Handbook with
the Super73 and refer to it for information
whenever necessary. The information
contained in this publication is based on the
latest information available at the time of
printing.
More information can be found on
www.lithiumcycles.com
Lithium Cycles reserves the right to make
changes at any time without prior notice, or
obligation. Not to be reproduced wholly
or in part without the written permission of
Lithium Cycles.
TABLE OF CONTENTS
You are now part of the Super73 owner’s
circle. Before jumping on your new vehicle,
please keep in mind a few important safety tips
and maintenance recommendations to ensure the
best experience.
For the latest information, please refer to our
website www.lithiumcycles.com/pages/owners
PAGE:
Page 4 WELCOME
Page 5 REGISTER YOUR BIKE
Page 6 IMPORTANT!
-Before you begin –Battery Charging
Page 7 UNBOXING
Page 8 ASSEMBLY
Page 14 OPERATING YOUR SUPER73
Page 15 YOUR FIRST RIDE
Page 16 WHAT YOU NEED TO KNOW/SAFETY
Page 19 MAINTENANCE
Page 20 WARRANTY INFORMATION
2862 Walnut Avenue, Suite D - Tustin, CA, 92780
Phone: 1.949.313.6340 • E-mail: [email protected]
4
WELCOME
We’re glad to have you as part of our Super73 rider community.
Let the adventures begin. Please read this owner’s handbook
before riding in order to become thoroughly familiar with the
correct operation of your bike’s controls, its features, capabilities,
and limitations. This handbook includes safe riding tips, but does
not contain all the techniques and skills necessary to ride a
bicycle safely. Please make sure you are familiar with your regions
bicycle laws.
JOIN OUR COMMUNITY OF RIDERS
Our relationship with you does not end with the purchase of a
Super73. Your feedback on the buying and ownership experience
is very important in helping us develop our products and services
for you.
There are many ways to interact:
•Owner’s Circle Newsletter
•https://www.super73owners.com/
•Instagram.com/Super73 #SUPERSQUAD
•Visits and riders are welcome at our headquarters in Orange
County
2862 Walnut Avenue, Suite D - Tustin, CA, 92780
oPhone: 1.949.313.6340
oE-mail: info@lithiumcycles.com
SEE YOU ON THE ROAD
-TEAM SUPER73
1. REGISTER YOUR SUPER73
In order to validate your warranty your Super73 must be registered.
Each Super73 has a unique serial number to help us track your
purchase and guarantee the quality and service of your bike.
Record the following information for future reference:
Location or website of purchase:
…………………………………………………………
Date of purchase: …………………………………………………
Model (V2): ………………………………………………………..
Bike Serial #: (Engraved on the side of the bottom bracket in between
the pedal cranks)
…………………………………………………………………….
Battery #:
……………………………………………………………………
Battery Key #:
…………………………………………………………………………
………….
We recommend that you keep your original receipt with this
handbook.
2. BEFORE YOU BEGIN
1. CHARGE THE BATTERY OVERNIGHT.
An initial charge will help condition your battery cells and allow for optimum
performance throughout its life.
Please note that the charger indicator light may turn green, indicating a
complete charge, before the conclusion of the night.
Allowthechargetocontinueforatleast8hours.Subsequentchargeswillbe
complete after 3-4 hours, or when the light turns green.
2. PLUGIT INPROPERLY.
Turn off the battery, “0”, and connect the battery to the charger then connect
to the AC wall outlet. This will reduce or eliminate chance of sparking due to
capacitordischarge.
The battery must then be turned on, “1”, in order for the battery to charge. When the
charge is complete, first turn off battery, then unplug the charger from the battery.
The battery is ready for use.
3. LOCKINBATTERYWHILERIDING.
Battery may slip out over rough terrain unless securelylocked into place with
provided keys.
4. CHARGING LONGTERM
If the SUPER73 or battery is left unused for prolonged storage, recharge the battery
at least every (3 months) 90-days during storage for optimum battery performance.
Leave battery at no more than half capacity before storage.
NOTE: LOST OR DAMAGED KEYS ARE NOT COVERED UNDER WARRANTY;
WE STRONGLY SUGGEST MAKING COPY OF KEYS
3. UNBOXING
WHAT’S IN THEBOX
•Bike
•Front Wheel
•Pedals
•Welcome Kit
*Battery and Charger shipped separately
TOOLS NEEDED
•Box Opening: Brute Force
•Pedal Install: Pedal wrench or 15mm open-end wrench
•Zip-Tie Cutting: Flush Cutters
•Plastic Wrap/Foam Cutting: Scissors
•Front Wheel Install: 15mm socket w/socket wrench
•Handlebar Install: Long L-Shaped 6mm Allen wrench & 13mm open-end
wrench
•Brake Lever Install: 4mm Allen wrench
Packing Material
Please dispose of properly at your local refuse center or
follow guidelines on packaging.
2862 Walnut Avenue, Suite D - Tustin, CA, 92780
Phone: 1.949.313.6340 • E-mail: [email protected]
8
4. ASSEMBLY
Please read and refer to the following guide to correctly and safely assemble this model:
1. Before opening the box, lay the box down with the ‘Super73’ logo facing up. Opening
the box in any other way may cause the inner contents to fall out, resulting in damage.
2. Remove the wheel box and set aside. Use a pair of scissors to carefully cut the tape
holding the bike’s plastic wrap together. Cutting too deep may damage crucial bike
components.
IMPORTANT: IN ORDER TO VALIDATE MANUFACTURER WARRANTY
ASSEMBLY BY E-BIKE SPECIALIST IS REQUIRED.
2862 Walnut Avenue, Suite D - Tustin, CA, 92780
Phone: 1.949.313.6340 • E-mail: [email protected]
9
3. We strongly recommend having a second person assist with lifting the bike out of the
box; engage the kickstand and set the bike upright on a clutter-free floor space.
4. Remove the front wheel from its box (this is where that welcome kit is located!), loosen
the wheel nuts and slide into drop out. Tighten the wheel nuts using a 15 mm socket
wrench and tighten to a torque of 25-30 lb/ft.
2862 Walnut Avenue, Suite D - Tustin, CA, 92780
Phone: 1.949.313.6340 • E-mail: [email protected]
10
5. Use a pair of flush cutters to cut all fluorescent yellow cable ties holding the handlebar to
the frame and a pair of scissors to remove all the protective foam.
6. NOTE: WE HIGHLY RECOMMENDED TO HAVE A SECOND PERSON
PLACE HIS/HER HAND UNDER HEADSET TO ENSURE COMPONENTS DO
NOT FALL DURING ASSEMBLY.
Use a 6mm Allen wrench and a 13mm open-end wrench to remove the handlebar riser
clamp hardware to install handlebars.
Indice
Altri manuali Lithium Cycles Scooter
