Litmor Capsule Manuale utente
INSTALLATION
MANUAL
Please download
the LitmorTM app
by visiting.
Get
ready!
HERE COMES
YOUR NEWEST
FAMILY GUARDIAN.
Welcome to LitmorTM family!
You are about to set up the world's rst A.I. powered camera
oodlight. Please watch the installation videos in the LitmorTM
app rst, then carefully follow the instructions in this manual.
Make sure you read all the tips and cautions before taking action.
Tips： This manual is for informational purposes only. Working with electricity can be
dangerous, hire a licensed electrician is highly recommended.
Litmor
What’s in the box
This bracket screws into your
before attaching to your LitmorTM
Capsule Camera Floodlight.
Tips： Please make sure you have all parts and tools with you before starting the
installation. If any parts are missing, please contact our online customer service.
We don't suggest to use any substitute to do the installation. These instructions
assume you are replacing an existing oodlight and/or have a junction box where
oodlight camera can be mounted. If you don't have a junction box, please read
the step 3/7 "without junction box".
How it all
fits together
Insert TF card
Do you have a TF card with you?
Please make sure you have successfully inserted the card
from the back of the product before starting installation.
Tips： We recommend to use a . LitmorTM Capsule supports up to
128GB TF card. It will store up to 2-month video locally, and all the data is encrypted.
1
2
Open the cover
Insert the card
Anti-theft screw
LitmorTM Capsule
Camera Floodlight
Bracket
screws
Mounting
bracket
Junction box
Wire nuts
Installation
height and angle
We recommend mounting your LitmorTM Capsule
at 8.5 feet o the ground, 30 degrees facing down.
With this conguration, the motion detection
range for activating LitmorTM Capsule's is up to
33 feet (10 meters).
Get
started!
7-steps
installation
Motion
Detection
Area
STEP 2/7
Remove the existing
oodlight
Make sure the breaker is
power o.
Disconnect the wires and
remove your existing oodlight
from the junction box.
If there is a bracket attached to
your junction box, remove that
as well. Check your junction
box to make sure water cannot
get into it. Junction box
Tips: LitmorTM Capsule DO NOTrequire ground wire
connection because its bracket is made of plastic.
STEP 1/7
Shut power off at the breaker
If you do not know where your breaker is or how to turn o power
to your oodlight circuit, hire a .
CAUTION: Risk of re.
DO NOT install near combustible
or ammable.
WARNING: Risk of electrical shock.
Disconnect power at the fuse or circuit breaker.
Verify that the supply voltage is correct.
Connect xture to a 100V ~ 240V AC 50/60Hz
power source.
Ensure proper ground xture.
Always follow code standards when installing
wired connections.
1
2
3
4
STEP 3/7
Install the mounting bracket Without junction box
Install the mounting
bracket following the
engraved direction.
Make sure your
existing wires come
through the middle of
the bracket.
Make sure the ground
wire is securely kept
inside the junction box.
Attach the bracket to your
junction box using at least
two screws, and use the
level to adjust even.
Position the bracket at the
installation spot and mark the
spots with a pen on the wall
where you will screw.
Drill a hole in the wall, then
insert expansion nut.
Carefully push all the wires
through the large opening in
the center of the bracket.
Mount the bracket using at
least two screws and use the
level to adjust even.
1
1
2
2
2
3
3
4
4
4
4
1
2
3
If the installation spot does not have an existing junction box or requests
extra wiring, please hire a licensed electrician and use the following steps
as reference:
3
STEP 4/7
Connect the power wires
Use the built-in hook to hang LitmorTM Capsule
from the bracket while connecting wires. Hook
one end onto the bracket as illustrated.
Use a wire nut to connect the white wire coming
out from your junction box to the white wire on
your LitmorTM Capsule.
Connect the black wire from your junction box
to the black wire on your LitmorTM Capsule with
another wire nut.
Tips：If you don't have clearly colored black and white wires coming out
from your junction box, consult a licensed electrician.
1
3
2
Hang your LitmorTM Capsule
from the bracket
Connect white wires
Connect black wires
1
2
3
STEP 5/7
Place LitmorTM Capsule
on the bracket
Carefully push all the wires
through the large opening in the
bracket.
Hold LitmorTM Capsule with
both hands as illustrated
on the right and align
its bottom with the
mounting bracket.
1
2
55o
Rotate LitmorTM Capsule clockwise to its lock position.
Make sure it's tight connected to the bracket.
3
STEP 6/7
Secure the LitmorTM Capsule
with the anti-theft screw
Secure the LitmorTM Capsule with the .
STEP 7/7
Turn on power at the breaker
After restoring power, the indicator light will turn on in blue.
Indice
