Livestrong LSPRO2 Manuale utente

LSPro2 Service Manual

TABLE OF CONTENTS

CHAPTER 1: SERIAL NUMBER LOCATION……………………………………………..………….3

CHAPTER 2: ENGINEERING MODE

2.1 Engineering Mode…………………………………….………………………………………….….……..4

2.2 Engineering Mode Overview…………………………………………….…………………………..…….5

CHAPTER 3: TROUBLESHOOTING

3.1 Electrical Diagram…………………………………………………………………………………….…….6

3.2 Troubleshooting - No Power to the Console………………………………………………….……….....7

3.3 Troubleshooting - No Console Response……………………………………………………....….…….8

3.4 Troubleshooting - Incline Motor Issues ……………..………………………………………..….9

3.5 Troubleshooting - Speed Response Inaccurate… …………………………………………..………....10

3.6 Troubleshooting - Noise Issues……………………………………………………………..………….…11

3.7 Troubleshooting - Speaker / Audio Issues………………………………………………..……………...12

CHAPTER 1: Serial Number Location 1

1-1 Serial Number Location

CHAPTER 2: Engineering Mode

2.1 ENGINEERING MODE

1) To enter Engineering Mode, press & hold the

2) INCLINE DOWN “ɐ”and SPEED UP “ɠ

ɠɠ

ɠ” keys at the same

time

3) for 3-5 seconds until Engineering Menu appears on the

display.

2) Use the INCLINE and SPEED UP and DOWN keys to select

a parameter.

3) Press ENTER to enter a parameter setting.

4) Use the INCLINE and SPEED UP and DOWN keys to change the parameter.

5) Press the START key to save the change to the parameter.

6) Press and hold the STOP key to exit Engineering Mode and return to normal operation.

CHAPTER 2: Engineering Mode

2.2 ENGINEERING MODE OVERVIEW

MODE FUNCTION DESCRIPTION

ENG 0 Display Test Start Key – LCD/LED on

Stop Key – LCD/LED off

Any Other Key - Will show on the display window.

Hold the STOP key for 3 seconds to return to the Engineering Menu.

ENG 1 Hardware Test Motor & Incline Motor Test.

ENG 2 Auto Calibration Auto calibrates the speed only.

ENG 3 Switch Function Use the INCLINE or SPEED UP and DOWN keys to switch DEMO

MODE off or on(Demo on=1 & Demo off=0 on DISTANCE window).

Use the START key to select unit (1=KM & 0=Mile on TIME window).

ENG 4 Information Accumulated Time and Distance

Press and hold the START key for 5 seconds to clear all data.

Remarks: Unit of Time is Hour.

Unit of Distance is KM or Mile based on your set.

SECOND LEVEL

ENG 8

Software Version To Get to ENG 8 - Enter into ENG 3, the press and hold the SPEED UP

and INCLINE DOWN key at the same time for 3-5 seconds.

Press ENTER at P0 - Software version.

Press ENTER at P1 - Select speed up rate (normal or quick).

Press ENTER at P3 - Hold the START key to clear all data.

ϡϡ

ϡ“START” key to save the change.

ϡϡ

ϡDemo off-- console will display Figure A when you set up Demo on; Demo on--60 seconds later after remove the

safety key, the console will enter into DEMO ON MODE. The LED and LCD will display in turns (Figure B).

FIGURE A FIGURE B

CHAPTER 3: Troubleshooting

3.1 Electrical Diagram

CHAPTER 3: Troubleshooting

3.2 TROUBLESHOOTING – NO POWER TO THE CONSOLE

NO POWER TO THECONSOLE

1) SYMPTOM:

a. The power switch is in the on position, but the console will not turn on.

2) SOLUTION:

a. Check to see if the power switch is lit. If it is not, try a different outlet.

- If the power switch still does not light up with a known good outlet, replace the power switch.

b. Check to see if the MCB has power. There is a red power LED on the MCB that should be lit.

c. If the MCB does not have power, check the connection of the power wiring from the power receptacle to the MCB.

Use a multi-meter to measure AC1 & AC2, AC voltage shall be same as local’s standard voltage (110V-240V)

- If AC voltage value is standard, replace the MCB as it shall be defective.

CHAPTER 3: Troubleshooting

3.2 TROUBLESHOOTING – NO POWER TO THE CONSOLE-CONTINUED

d. If the MCB does have power, check the connection of the console cable wire at the MCB and UCB.

- Remove the console cable from MCB, and use a multi-meter to measure the DC voltage between the “GND pin” (Pin

4&5) and the ” + 15V Pin” (Pin7 & 8)---see section 5.1. DC output is normally around DC 15V. If no output, replace

the MCB.

- If output is around DC 15V, check the console cable. If it is defective, replace the console cable.

- If the console cable connections are all good, replace the PCB.

CHAPTER 3: Troubleshooting

3.3 TROUBLESHOOTING – NO CONSOLE RESPONSE

THEPOWER IS ON, BUT MACHINE HAS NO RESPONSE

1) SYMPTOM:

a. The power is on and the console lights up, but the treadmill does not run when keys are pressed.

2) SOLUTION:

a. Check if the console beeps when all keys are pressed. If no, replace the keypads.

b. Enter Engineering Mode (See Section 4.1), and scroll to ENG 1 (Hardware Test).Press the key “ENTER” first and

then the key ”START”.

- When press the key “SPEED + / -“, if the data on windows “TIME” & “DISTANCE” is changed, the console is ok.

If not, replace the PCB.

c. Turn off the power switch, and open the motor upper cover. Remove the red & black wires of motor from the MCB,

and use a multi-meter to measure the resistance of drive motor.

If the resistance is bigger than 10 ȍ, the drive motor is defective. Replace the drive motor.

If the resistance is lower than 10 ȍ, the drive motor is ok. Then,

- Check the connection of the speed sensor (encoder disk group) at the MCB (Figure A).

- Remove the speed sensor (Figure B) from the motor and clean it, then re-test.

- If the speed sensor is clean and has a good connection but still will not operate, replace the speed sensor.

- Replace the MCB as the last step if machine does still not run after to take above actions.

FIGURE A FIGURE B

CHAPTER 3: Troubleshooting

3.4 TROUBLESHOOTING - INCLINE MOTOR ISSUES

INCLINE MOTOR ISSUES

1) SYMPTOM:

a. The incline motor does not lift up or down.

2) SOLUTION:

a. Enter Engineering Mode (See Section 4.1), and scroll to ENG 1 (Hardware Test). Press the key “ENTER” first and

then the key ”START”.

- Press the key “INCLINE Ÿ/ź”.

If can hear beeps from two relays at the MCB, the MCB is ok. Then check the connection of the elevation

motor at the MCB first, try to unplug and re-plug these two pins. If can not resolve the issue, replace the

elevation motor.

If there is no beeps from these two relays, MCB is defective and replace the MCB.

Altri manuali per LSPRO2

Indice

Altri manuali Livestrong Tapis roulant

Livestrong

Livestrong LS8.0T-C2 Manuale utente

Livestrong

Livestrong LS13.0T Manuale utente

Livestrong

Livestrong LS15.0T Manuale utente

Livestrong

Livestrong LS9.9T Manuale utente

Livestrong

Livestrong LS13.0T Manuale utente

Livestrong

Livestrong LS13.0T-02 Manuale utente

Livestrong

Livestrong T1xLS Manuale utente

Livestrong

Livestrong LS9.9T Manuale utente

Livestrong

Livestrong LSPRO1 Manuale utente

Livestrong

Livestrong LS10.0T-02 Manuale utente

Livestrong

Livestrong LS9.9T Manuale utente

Livestrong

Livestrong LS8.0T Manuale utente

Livestrong

Livestrong LS10.0T Manuale utente

Livestrong

Livestrong LS16.9T Manuale utente

Livestrong

Livestrong LS7.99T Manuale utente

Livestrong

Livestrong LS8.0T Manuale utente

Livestrong

Livestrong LS8.0T Manuale utente

Livestrong

Livestrong LS10.0T Manuale utente

Livestrong

Livestrong LS10.0T Manuale utente

Livestrong

Livestrong LS7.9T Manuale utente

Livestrong

Livestrong LS16.9T Manuale utente

Livestrong

Livestrong LS7.9T Manuale utente

Livestrong

Livestrong LSPRO2 Manuale utente

Manuali Tapis roulant popolari di altre marche

Treadly

Treadly TREADLY 2 Manuale utente

HEALTH ONE

HEALTH ONE Walk Ro Manuale utente

NordicTrack

NordicTrack NTL12941 Manuale utente

NordicTrack

NordicTrack T7.5 S Manuale utente

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Manuale utente

Merax

Merax MS282992 Manuale utente

FYTTER

FYTTER RU-2SX Manuale utente

Precor

Precor 903 Manuale utente

FitLogic

FitLogic freewill d225 Manuale utente

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Manuale utente

Horizon Fitness

Horizon Fitness Adventure 5 Plus Manuale utente

Stamia

Stamia InMotion II Manuale utente

Smooth Fitness

Smooth Fitness EVO 3i Manuale utente

NordicTrack

NordicTrack NETL81810.0 Manuale utente

Schwinn

Schwinn 830/Journey 8.0 Manuale utente

Keys Fitness

Keys Fitness HealthTrainer HT-740T Manuale utente

Spirit

Spirit XT8 Manuale utente

NordicTrack

NordicTrack T 14.0 Treadmill Manuale utente