4
©2020 Livox Tech. All Rights Reserved.
Product Prole
Introduction
Livox Tele-15 (hereinafter referred as “Tele-15”) features a long detection distance, high precision,
and high reliability, and can be used for multiple applications including autonomous driving, rail trac,
mapping, and security.
High FOV Coverage: The Tele-15 utilizes Livox’s unique non-repetitive scanning technology and
multi-laser and multi-APD DL-Pack technology. This ensures a high-density point cloud which is
approximately ve times denser than the Livox Mid-40 within the same period.
High Detection Range: Tele-15 has an extremely high signal-to-noise ratio due to its advanced
photoelectric design. With a luminance of 100 kilolux, the high sensitivity function can detect objects
with a 10% reectivity at up to 320 meters away.
High Reliability: The Tele-15 offers enhanced reliability as the cutting-edge design works normally
without rotating internal electronic devices such as the transmitter and receiver. The Tele-15 has
undergone rigorous reliability testing required by the automotive industry. In addition, the Tele-15 has
achieved an IP67 waterproof and dustproof rating under GB 4208-2008 and IEC 60529 standards.
Note the included cables do not meet the same standards.
Environmental Adaptation: The built-in tag information helps users identify the type and accuracy of
the low noise. Tele-15 avoids interference caused by strong environment light and lters most noise
caused by sunlight. When the environment temperature exceeds 65° C (149° F), the noise lter ability
decreases. Even with a luminance of 100 kilolux, the Tele-15 boasts a low noise rate lower than 0.01%.
Built-in IMU Module: The model of the build-in inertial measurement unit (IMU) is BMI088. The push
frequency of the IMU is 200 Hz.
User-friendly Livox Viewer: Livox Viewer is a Windows software specially designed for Livox LiDAR
sensors. It displays and records real-time point cloud data, replays point cloud videos, and analyzes the
3D point cloud data. Users can set product parameters and calibrate extrinsics using Livox Viewer. The
simple interface makes Livox Viewer easy to use.
Livox SDK: A software development kit (SDK) is provided to help develop customizable applications
using the data acquired from point cloud data. Livox SDK supports Windows/Linux/Mac OS/ROS.
• This distance can be reached when the target object reflects 50% or more of incident light (e.g.,
grey concrete walls and roads have a reflectivity range from 15% to 30%) in an environment with
a temperature of 25° C (77° F). The default maximum detection range is 500 meters. However,
with customized firmware, the maximum detection range can be increased to up to 1,000 meters.
Contact Livox at https://www.livoxtech.com/contact if you require detection beyond 500 meters.
• Before using for the first time, remove the screen protector from the optical window.
Product Characteristics
The Tele-15 utilizes Livox’s unique non-repetitive scanning technology and multi-laser and multi-APD DL-
Pack technology. This ensures a high-density point cloud which is approximately ve times denser than
the Livox Mid-40 within the same period. Over time, the coverage inside the FOV increases signicantly
and reveals more detailed information of the surroundings.
Figure 1.2.1 displays the point cloud data of the Tele-15 inside the FOV within 0.1s. In the center of
the FOV, the scanning density is as dense as traditional 300-line LiDAR sensors. In other areas of the
FOV, the scanning density is signicantly denser than 100-line LiDAR sensors. Within Tele-15’s FOV, the
overall scanning density rivals traditional 128-lines LiDAR sensors within 0.1s.
