Lock4Safe MiniTech Manuale utente

Lock4Safe BV

Maasstraat 3d

NL-7071VR ULFT

The Netherlands

[email protected]

www.lock4safe.com

Lock4Safe BV

Boschstr. 16

D - 47533 Kleve

Germany

T +49 (0)2821 894 41 90

F +49 (0)2821 894 41 99

MiniTech

DigiTech

TechMaster

Entry Units

with LCD display

Technical

Manual

Entry Units with LCD display – Technical Manual www.Lock4Safe.com

Features

The entry units for TechMaster, MiniTech

and DigiTech are dierent in some cases in

their electronic functions, but the entry units

are mechanicly constructed in the same way.

Therefore they have the same technical

characteristics:

1. Two-line (16 characters) LCD display

2. LED (red/green)

3. Dallas Terminal (on the left side) -

optional

4. Keypad with 10 number and

2 symbol keys

5. Battery compartment with cover

6. Serial data port (Banana plug),

(on the right side)

Mounting dimensions

We recommend mounting the input unit permanently (standard).

In exceptional cases, it may be advisable to mount them removable.

(see technical drawing below)

www.Lock4Safe.com Technical Manual – Entry Units with LCD display

Standard mounting

(recommended)

• Clean the surface of the recessed area for the

keypad from dust and grease/oils.

• Remove protective layer from the backside of the

keypad, align the membrane at the top and glue it

to the surface.

• Feed the entry unit cable through the hole and

tighten the entry unit with the M4 screws supplied.

Do not

tighten the screws yet

so that the entry

unit can still be optimally aligned.

• Align entry unit and tight the screws

• Prepare the mounting and cable /spindle holes

on the safe door.

• Deburr the cable hole well so that the cable can

cannot be damaged.

• Mount Lock(s) and other devices according to their

technical manuals.

• Perform a full system test.

11 mm

41,50 mm

Entry Units with LCD display – Technical Manual www.Lock4Safe.com

Mount entry unit

removeable

• Prepare the mounting and cable /spindle holes

on the safe door (vertical).

• Deburr the cable hole well so that the cable

cannot be damaged.

• Attach the shoulder screws (not supplied in the

standard) in the two M4 holes.

• Feed the cable through the hole.

• Hook the entry unit on the shoulder screws, and

press downwards until it snaps into place.

41,50 mm

11 mm

Altri manuali per MiniTech

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Lock4Safe Serratura

Lock4Safe

Lock4Safe DUET DU4020 Manuale utente

Lock4Safe

Lock4Safe Pulse PRO Manuale utente

Lock4Safe

Lock4Safe TouchManager Manuale utente

Lock4Safe

Lock4Safe Pulse PRO Manuale utente

Lock4Safe

Lock4Safe Pulse PRO Manuale utente

Lock4Safe

Lock4Safe HOME10 Manuale utente

Lock4Safe

Lock4Safe TechMaster Manuale utente

Lock4Safe

Lock4Safe MiniTech Manuale utente

Lock4Safe

Lock4Safe HOME2 Manuale utente

Manuali Serratura popolari di altre marche

Magic

Magic 105 Manuale utente

Gantner

Gantner GAT NET.Lock 7020 System Guida rapida

Wittkopp

Wittkopp Insys 7202 Manuale utente

Dorma

Dorma Studio Classic Manuale utente

Securam

Securam ECSL-601 Manuale utente

Sudhaus

Sudhaus 3003 Manuale utente

Safety 1st

Safety 1st 48517 Manuale utente

Pado

Pado FDS-10 Manuale utente

Esco

Esco systeQ Series Manuale utente

COMPX

COMPX National D8951 Manuale utente

secureo

secureo Key Box Manuale utente

Stock Loks

Stock Loks C8713 Manuale utente

COMPX

COMPX 1T-058 Manuale del proprietario

Auslock

Auslock T11 Manuale utente

ELCOM

ELCOM 7205 Manuale utente

Stealth SAFES

Stealth SAFES ShadowVault Manuale utente

Knox

Knox KeySecure 5 Manuale utente

Kwikset

Kwikset 48334/01 Manuale utente