Loggerflex bun Hygro Manuale utente
1
Introduction
“bun hygro”or simply "bun" is a temperature and relative humidity (RH) recorder and alarm system, which measures temperature and RH in desired intervals and uploads the readings to a web-
based application via your home or office Wi-Fi. It is powered by an internal ultralong-life battery (up to 25 years). Recording intervals can be flexibly adjusted from 1 minute to 2 hours, and
upload intervals can vary from every minute to once a week. As an alarm system, "bun" immediately uploads the records if the measured values exceed or fall below the user-defined limits, and
then then notifies the user via e-mail and SMS
“bun” can store over 16,300 records on its internal memory, and syncs them via Wi-Fi to a cloud-based application named LoggerMaster. You can easily adjust measurement and recording
intervals through LoggerMaster. Please visit https://www.loggermaster.com.
2
3
Package contents (figure 1)
A) “bun hygro” device (1 piece)
B) One (1) piece of ring magnet
Figure 1
4
Product’s technical specifications
Temperature measurement range:
-40~ + 55 °C (internal sensor)
-40~ + 130 °F
-40 ~ + 125 °C (external sensor)
-40 ~ + 225°F
Temperature measurement accuracy:
>5 °C = ±0.3 °C
<5 °C max. = ±1 °C
>40 °F = ±0.55 °F
<40 °C max. = ±1.8 °F
RH measurement range:
0 ~ 100 %
RH accuracy:
>20 & <80% = ±3%
<20 & > 80% max.=±5%
Min. reading interval: 60 seconds
Internal memory> 16,300 records
Measurement resolution: ± 0.3
Working temperature:
- 40 ~ + 70 °C
- 40 +130 °F
Working RH:
0 ~ 100 %
Max. reading interval: 2 hours
Storage temperature:
- 40 ~ + 75 °C
- 40 +165 °F
Storage RH:
0 ~ 100 %
5
Installation
Strong magnet makes it easy to mount the device to any steel surface. To mount “bun hygro” on other materials, you can
easily mount the ring magnet in the package using a nail or screw on the wall and simply attach the device through its
magnet to the wall-mounted magnet. Figure 2
6
Operation Instructions
First steps are to createan account and claim your device as follows:
•Please visit www.loggermaster.com and create an account by following the website’s instructions.
Note:Please read the loggermaster's condition of use and privacy notice very carefully. By creating an account, you agree to loggermaster's condition of use and privacy
notice.
•Log into your account.
•Edit your time zone and preferred language in “my profile page” located in the top right corner beside “logout” button.
•Claim your device by clicking on "+"button in the top left corner of the webpage.
•Enter 8-digit serial number and 8-digit DUID number printed on the back of your device.
7
Activating your device by connecting “bun hygro” to your Wi-Fi
To save battery, your device is in sleep mode. You need to activate it before using it as follows:
•Place a magnet on the center of your device (marked with icon) and wait for 3 seconds (figure 3). As soon as device detects the
magnet “bun hygro” will beep once. Keep the magnet in position until you hear a long continues beep.
•Hearing the long beep means that “bun hygro” is in “setup”mode. Use your smart phone, computer, tablet, etc to search for open Wi-Fi
network named (SSID) "bun hygro" (no password required).
•Connect to “bun hygro”,open a browser and key in 192.168.4.1 in address bar. A blue page will appear with your devices serial and
DUID numbers (figure 4).
Figure 3
8
Key in following information in the blue page:
•Wi-Fi name (SSID) of the network that you wish to connect your device to.
Note:make sure that the device is within the range of Wi-Fi network and Wi-Fiis on. SSID is case sensitive so make sure you are typing the SSID
correctly with no extra space.
•Wi-Fi password
Note: Password is case sensitive.
•Click on the connect button.
Figure 4
9
Note:
) and you need to trigger the•If you fail to connect to “bun hygro” hotspot within 3 minutes, session will expire following with two (2) long beeps (like phone line busy signal:
hotspot with magnet again.
•If your “bun hygro” successfully connects to your Wi-Fi, it will connect to server and become activated automatically. In this case you will hear (4) short quick beeps (like: . . . .)
) which means you need to repeat•If for any reason your device fails to connect to Wi-Fior server, device will inform you by (2) long beeps (like phone line busy signal: the
procedure again.
10
Web based application (www.loggermaster.com)
•By logging into your account, you can always adjust key parameters in "my
profile" including language, time zone, country, default login page (define your
landing page when you log in), password, emails and phone numbers (to
receive notifications)
•You can always access the list of your “bun hygro” devices by clicking on the
"loggers and controllers" menu (see figure 5)
•You can see “add” and “search” icons that help you add new devices to your
account or find a specific device in your list in top menu bar.
Figure 5
