Logik LBMFMX14 Manuale utente

BI Oven:

LBMFMX14

LBFANX14

LBFANW14

LBFANB14

SERVICE MANUAL

2

3

Door assembly

Removing the door assembly

1. Lift the lock of the left and right door hinge.

2. Position the door at an angle of 45° relative to the front of the appliance, lift and

pull out toward yourself.

3. Place the door on a at surface with the handle facing downward. Using a at

screwdriver, pry the cap of the prole on one side to remove it.

4

4. Pull out the inner glass panel and carefully lift it. Do the same with the middle

glass panel(s).

Door assembly

5. Remove the screw that fastens the hinge to the inner glass prole. Pull the hinge

out of the prole.

6. Use the screwdriver to pry and remove the glass panel bracket.

Refer to the Annex to the SBI_001 service manual.

5

Door assembly

7. Remove the door handle by undoing the screws.

8. To reassemble the components follow the above steps in reverse order.

6

Front panel

Remove the front panel

1. Remove the front panel top cover and lift it up. On both sides undo the screws

that fasten the front panel to the body of the appliance.

7

Convection fan assembly

1. Remove the rear wall according to relevant instructions in the manual. Remove

the fan guard by removing the screws. Remove the fan propeller by holding the

fastening nut with the pliers and rotating propeller.

Remove the fan

3. To reassemble the components follow the above steps in reverse order.

2. Remove the fan drive by bending the locking tab. Then turn counter-clockwise

and pull the fan drive toward you. Disconnect the fan drive wiring harness.

8

Temperature sensor

1. Remove the rear wall according to relevant instructions in the manual. Remove

the screw securing the temperature sensor. Remove the temperature sensor em-

bedded in the socket. Disconnect the temperature sensor wiring harness.

Remove the temperature probe

2. To reassemble the components follow the above steps in reverse order.

9

Heating elements

1. Remove the rear wall according to relevant instructions in the manual. Discon-

nect the wiring harness of the top heater. Remove the nuts securing the heater to

the oven chamber. After unscrewing, remove the heater from the oven chamber.

Remove the top heating element

2. To reassemble the components follow the above steps in reverse order.

10

Heating elements

1. Remove the rear wall and the fan guard according to relevant instructions in the

manual. Disconnect the wiring harness from the convection fan heater. Using a

socket head wrench undo and remove the nut securing the heater assembly.

Remove the convection heater

3. To reassemble the components follow the above steps in reverse order.

2. Inside the oven chamber, remove the screw securing the heater and pull the

heater toward yourself.

Questo manuale è adatto per i seguenti modelli

3

Indice

Altri manuali Logik Forno

Manuali Forno popolari di altre marche

Bosch

Bosch HVA531NS0 Manuale utente

Electrolux

Electrolux EOF6P46X Manuale utente

NEFF

NEFF B44S32 5GB Series Manuale utente

Combi

Combi BLODGETT BC142GDS Manuale utente

AEG

AEG COMPETENCE 311704300 Manuale utente

Falcon

Falcon DOMINATOR PLUS G3106 Series Guida utente

Rational

Rational SCC WE 61G Manuale utente

Smeg

Smeg DOSPA38X Manuale di installazione e funzionamento

Electrolux

Electrolux air-o-convect 20 GN 2/1 Manuale utente

Miele

Miele HR 1954-2 Manuale utente

KHIND

KHIND OT50 Manuale utente

Henny Penny

Henny Penny Smoker Box Manuale utente

Lang

Lang ECOD-AP Manuale utente

AEG

AEG BEK455310M Manuale utente

Frigidaire

Frigidaire FNGE90JGR Manuale utente

Hotpoint

Hotpoint FE9 S831 JSH IX Manuale utente

GE

GE Advantium SCB2000 Manuale utente

AEG

AEG DE401301DM Manuale utente