Logik L4SCAN11 Manuale utente

Portable A4 Scanner

Instruction Manual

L4SCAN11

Contents

Unpacking...........................................................................................................3

System Requirements ........................................................................................4

Product Overview...............................................................................................5

Indicator Signaling.............................................................................................6

Stand Along (for scanning)................................................................................................6

USB Connect (for recharge battery only or read/copy le)............................................6

Installing and Charging Battery........................................................................7

Battery Status.........................................................................................................................7

Operation ............................................................................................................9

Select the Scan File Format ............................................................................................10

Scan an Original ..................................................................................................................11

Power o the Scanner.......................................................................................................12

Connecting to a Computer.............................................................................. 13

Connect the scanner to a computer............................................................................13

Disconnect the scanner from a computer.................................................................14

Arcsoft BizScanner .......................................................................................... 15

Install BizScanner................................................................................................................15

Run BizScanner....................................................................................................................17

Start to Use BizScanner.....................................................................................................18

Maintenance .................................................................................................... 24

Calibrating the scanner ....................................................................................................24

Cleaning the Sensor Glass ...............................................................................................25

Hints and Tips .................................................................................................. 26

Specications................................................................................................... 27

Safety Warnings............................................................................................... 28

Unpacking

Remove all packaging from the unit. Retain the packaging. If you dispose it

please do so according to local regulations.

The following items are included:

Thank you for purchasing your new Logik Portable A4 Scanner.

These operating instructions will help you use it properly and safely.

We recommend that you spend some time reading this instruction manual

in order that you fully understand all the operational features it oers. You

will also nd some hints and tips to help you resolve any issues.

Read all the safety instructions carefully before use and keep this

instruction manual for future reference.

Software Disc

P.N.: 2D1-PS003-D0161A

CIS Cleaning Swab

P.N.: 2AX-PS003-00001

Mains Adapter

P.N.: 060-CAP00-50513

Calibration Card

P.N.: 2P8-PS003-0001

USB Cable

P.N.: 052-USB0A-X0800

Lithium Battery

P.N.: 060-3450A-AGX10

Pouch

P.N.: 2P6-PS003-D0161

If items are missing, or damaged please contact Partmaster (UK

only). Tel: 0844 800 3456 for assistance.

Scanner

System Requirements

• Windows® XP / Vista™ / Windows® 7

Support Windows OS only.

• Pentium® IV 2.4 GHz or equivalent AMD Athlon®

• 512 MB DDR RAM or above

• 500MB free hard disk space

• 32-bit color display at 800x600 with DirectX 3D support

• DirectX 9.0c or above

Product Overview

1. Power Button

2. Custom Button

3. Battery Indicator

4. Function Indicator

5. Feeding Slot

6. SD Slot

7. USB Slot

8. PC Connection Port

9. Battery Cover

10. Roller Releaser

Indicator Signaling

Stand Along (for scanning)

Indicator Power LED 1

Battery

LED 2

Function Status

O O O Power O

On O Green Blink Power On Initial

On Green Orange Battery full and ready

for scan. The le format

is JPEG.

On Green Orange Blink Scanning

On Orange Green Battery is medium and

the le format is PDF.

On Red Red Blink Battery low and no SD

card (or lock) / ash disk

or paper jam.

USB Connect (for recharge battery only or read/copy le)

Indicator Power LED 1

Battery

LED 2

Function Status

O Red O Charging battery

O O O Battery fully charged

On Green Orange Battery full and can read

or copy le from PC or

Mac.

On Green Orange Blink Connecting with PC

The battery recharge only when the power is o only.

Use only the mains adapter provided for the base unit.

Installing and Charging Battery

1. Slide open the battery compartment cover.

2. Place the lithium battery as indicated. Follow the polarity indicated on the

scanner.

3. Slide the battery compartment cover back on.

4. Plug the mains adaptor to the scanner.

5. Plug the mains adaptor into the mains socket. Charge the scanner for 14

hours the rst time you charge it.

Battery Status

All the battery status will emit in the Battery Indicator.

Battery power indicator

When the scanner power is on:

• Greenlightindicate: Thebatteryisoffullcapacity

• Orangelightindicate: Thebatteryisofmediumcapacity.

• Redlightindicate: Thebatteryisoflowcapacity.

Charging Battery

When the battery power indicator is light red that mean the battery power

almost empty and need to recharge it.

1. Power o the scanner.

2. Connect scanner to PC USB ports or adaptor and the Battery Indicator

show the charge status as below :

• Redlightindicate: Chargingbattery.

• Blanklightindicate: Thebatteryhasfullycharged.

• The adaptor is for recharge only.

• Fully charged it before to use the scanner.

• Please don’t turn on or scan while battery is charging.

Handling the Batteries

• Improper or incorrect use of batteries may cause corrosion or battery

leakage, which could cause personal injury or damage to property.

• Install the batteries correctly by following the polarity (+ and -) indications

in the battery compartment.

• Use only the types of the batteries which are indicated in this manual.

• Do not install new batteries with used ones and do not mix dierent types

of batteries.

• Do not dispose of the used batteries as domestic waste. Dispose of them in

accordance with local regulations.

The SD card is the high

priority when you insert

the SD card and ash disk

together.

USB

TO PC

USB

TO PC

CARD

Operation

2. Press and hold the button for

about 0.5 seconds. The Function

Indicator green light blinks.

3. Wait until the Function Indicator

stops blinking then change to

orange and stays on to indicate

the scanner is ready.

1. Insert a memory card into the

memory card slot or a ash disk

into the ash disk slot.

Function Indicator

Select the Scan File Format

This scanner support JPG and PDF (B &W) scanned le formats.

1. The default format is JPG and the Function Indicator light orange.

2. Press the button and change the le format to PDF format. The Function

Indicator emit as green.

3. Press the button again and the le format change to JPG and the

indicator emit orange.

The Function Indicator emits patterns represent function status as follows:

Light Function Status

Green Blinks The scanner is power on and initiating.

Orange Steadily on The scanner is ready for use and the le format is JPG.

Green Steadily on The scanner is ready for use and the le format is PDF.

Orange /

Green Blinks

Continuously

• Initializing system and memory card. Please wait

until the initialization process is complete before

using the scanner.

• Busy scanning and storing image les. Please wait

until the process is complete before scanning

another original.

• Sensor cleaning in progress. Please wait until

the process is complete before performing any

operations.

Red Blinks • Paper jam. Press the Custom button for about 0.5

seconds; the scanner will back out the original so

you can remove it from the input slot.

• Memory card error. Remove the memory card to

clear this error status.

• Calibration failed. Error indication only.

No light The scanner is powered o.

Indice

Altri manuali Logik Scanner

Logik

Logik LSCAN11 Manuale utente

Manuali Scanner popolari di altre marche

Plustek

Plustek Scanner Manuale utente

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manuale utente

Renkforce

Renkforce DS100-5M Manuale utente

Image Access

Image Access WideTEK A2 Manuale utente

Canon

Canon imageFORMULA CR-120N Manuale utente

Fujitsu

Fujitsu FI-4860C2 Manuale utente

GeoSlam

GeoSlam ZEB Horizon Istruzioni per l'installazione

Kodak

Kodak i5800 Scanner Manuale utente

Kodak

Kodak i7300 Manuale utente

Revopoint

Revopoint POP Manuale utente

Fujitsu

Fujitsu fi-4860C Manuale utente

Eddyfi Technologies

Eddyfi Technologies Floormap X Manuale utente

Faselase

Faselase F6 Manuale utente

Fujitsu

Fujitsu CardMinder Manuale utente

Uniden

Uniden BC340CRS Manuale utente

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manuale utente

Mustek

Mustek PageExpress 4800 Pro Manuale utente

Optex

Optex 750830 Manuale utente