LogTag Recorders UTRED30-WiFi Manuale utente
8. Setting upper / lower alarms: Specify the upper temperature
and/or the lower temperature alarms if you would like the Logger to
trigger an alarm when the specified temperature is met or exceeded.
(Optional) Audible Alarm: When you enable this option, the logger will
sound an audible alarm, if an alarm is triggered.
9. WiFi Settings: Click this tab to configure your Logger to your desired
WiFi network. Under “Select SSID”, select the name of your WiFi
network. Then provide the WiFi password to the network selected.
You can now click “Configure” to complete the configuration of your
UTRED30-WiFi.
1. SETUP AND CONFIGURATION
Install AAA batteries into the battery compartment on the back of the
Logger by unscrewing the rear battery cover. Insert the batteries, as
shown by the symbols in the battery compartment, then, screw the rear
cover on.
Connect the Logger via USB cable to your computer. Please note
that the wider part of the Logger’s USB socket is oriented towards the
bottom. Download and install LogTag Analyzer from our website:
www.logtagrecorders.com/software
Start LogTag Analyzer. In order to start using your Logger, you need to
configure it via the ‘LogTag Wizard’. This can be accessed by pressing
‘F2’ on your keyboard or by clicking the ‘Wizard’ icon.
Quick Start Guide
UTRED30-WiFi
Copyright © 2018, LogTag Recorders Ltd.
1. Description: Enter details to identify your Logger.
E.g. Clinic Refrigerator. Also the status of your battery is indicated
here.
2. Password: If you select this option, any user wishing to configure the
Logger and/or download recorded data in the future must provide
this password. Note; when you select “Download requires a
password”, this will disable the generation of data files for your
UTRED30-WiFi Logger.
3. Push button start or date/time start: When the ‘Push button start’
option is selected, the Logger will start recording when the START
button has been pressed. When the ‘Date/Time start’ option is
selected, the Logger will automatically start recording at a specified
date and time.
4. Enable pre-start logging: With this option, the logger starts taking
readings as soon as the configuration data have been uploaded. If
you forget to press the START button, the data for the trip will still be
available. This insures no critical data is lost.
5. Record readings so that...: If this is selected, the Logger stops
logging after a predetermined number of readings.
6. Record a reading every...: This determines how frequently the
Logger records.
7. Begin recording after a delay of: Enter the time that passes after a
user has pressed the START button on the Logger until the start of the
recording. This prevents the Logger falsely triggering an alert whilst
the Logger is still acclimatizing to the new environment temperature.
5. ADDITIONAL INFORMATION
Stopping the Logger
If enabled, you can stop the Logger; press and hold the ‘START/
CLEAR/STOP’ button. Continue to hold while ‘STOPPED’ is shown on
the display; release the button when the ‘REC’ symbol disappears.
The Logger will no longer take any readings, however you can still
review the day statistics and download the logged results to a PC with
LogTag Analyzer.
The option to stop the Logger can be disabled during configuration, see
advanced options in LogTag Analyzer.
4. DOWNLOAD / RESULTS
1. Open LogTag Online
2. Go to your location, click on “Inspect” to see your readings since you
have configured your Logger.
3. You can download your data by clicking on the download button next
to the month and all your data will be displayed in a temperature
log (PDF).
You can also access your Logger’s data via LogTag Analyzer.
Continue to hold while ‘STARTING’ is shown.
Release the button when ‘READY’ disappears.
‘STARTING’ will also disappear, and the ‘REC’
symbol will be shown. The UTRED30-WiFi will now
record temperature data.
If the Logger has been configured with a start
delay, the word ‘STARTING DELAY’ is shown
instead of the ‘REC’ symbol. The delay time is
shown in hours and minutes. It will start recording
when it reaches 0:00
Paused function:
If enabled, any button activity will suspend recording and the Logger
will display ‘PAUSED’. This allows the user to review the statistics or
clear an alarm without causing an invalid recording, alarm or statistic.
Ensure your Logger is always connected via the USB cable to a power
source and connect an external probe to the Logger.
If the Logger has been configured with a
Date/Time start, it will start automatically at the
configured time. For the push-button start, when
the display shows ‘READY’, press and hold the
‘START/CLEAR/STOP’ button.
3. STARTING THE LOGGER
2. CONNECTING TO LOGTAG ONLINE
Before you start your Logger, you need to register it to an account
at www.logtagonline.com. Please ensure you have closed LogTag
Analyzer and proceed to LogTag Online and either create a new
account or sign in with an existing account.
Once you are signed into LogTag Online please click “Register Device”.
Here you can register your UTRED30-WiFi. Enter a description and the
Logger’s serial number (the number after S/N).
After you have registered your device, you can now click on “Locations”
and create a new Location.
A location represents the static site you wish to monitor such as a
refrigerator or freezer. If you require additional information on creating a
Location, please refer to the LogTag Online User Guide.
Altri manuali per UTRED30-WiFi
2
Indice
Altri manuali LogTag Recorders Regolatori di temperatura
