LogTag UTRED30-WiFi Manuale utente
Version D - February 2020
www.logtagrecorders.com
Quick Start Guide
What's Included 3
Battery Installation 4
Downloading LogTag Analyzer 5
Running the Connection Wizard 6
Connecting to your WiFi Network 9
Configuring your UTRED30-WiFi 12
LogTag Online 13
Installing the Wall Mount 15
Starting your UTRED30-WiFi 16
Quick Start Guide Contents
Page 3
What's Included
Please check you have each of the items shown below
before continuing with setting up your UTRED30-WiFi.
UTRED30-WiFi USB Cable
2x AAA Battery
(Not included)
Wall mount
(Not included)
External Probe
(Not included)
Page 4
Battery Installation
1. You will need a small Phillips (cross-shaped)
screwdriver to remove the cover on the back of the
UTRED30-WiFi case.
2. Once you have removed the battery cover, install
the two AAA batteries. Take note of the direction
each battery must be installed.
3. Once both batteries are securely installed, replace
the battery cover and secure via the screw provided.
AAA batteries are another backup power source to
ensure your device continues to record in the event
of a power outage or is unplugged.
The USB cable is the main power method to power
the UTRED30-WiFi unit permanently via the USB
socket.
Page 5
Downloading LogTag
Analyzer
To download the latest LogTag Analyzer, open your
browser and navigate to:
https://logtagrecorders.com/software/LTA3/
1. Fill in the form with your details, then click ‘Go to
downloads page’.
2. Click ‘Download Now’ to start the download.
3. Click ‘Run’ or ‘Save File’ then double-click the
downloaded file to open the LogTag Analyzer Setup
Wizard.
4. Follow the on-screen prompts to install LogTag
Analyzer.
5. Click ‘Finish’ to exit the Setup Wizard.
Warning: Please ensure no other LogTag software is
currently running on your computer before running the
Analyzer software.
Note: If you already have the LogTag Analyzer installed,
please see whether you need to update to the latest version
by clicking ‘Check Internet for updates’ from the ‘Help’
menu.
Page 6
Running the Connection
Wizard
The first page of the Wizard will be displayed.
When you’re ready to begin, click “Start”.
Please ensure there is internet connection on your
computer prior to starting this process.
Pl
ease ensure t
h
ere
i
s
i
nternet connect
i
on on
y
our
computer pr
i
or to start
i
n
g
t
hi
s process
.
You will be asked to sign in to your LogTag Online
account. If you do not have an account, click the link
Open LogTag Analyzer and select ‘Connection Wizard’
from the ‘LogTag Online’ menu.
Page 7
Running the Connection
Wizard continued...
below or alternatively, open your browser, type the
following link into the address bar and follow the
on-screen instructions.
https://logtagonline.com/signup
or click Create a LogTag Online Account link.
Note: If you ‘Skip’ this step, you will need to manually
register the device on LogTag Online or repeat the
LogTag Online Connection Wizard.
Click ‘Sign In’ after you have entered your login details
to continue setting up WiFi on your UTRED30-WiFi.
Page 8
The Wizard will now
scan for any connected
LogTag devices.
If the scan doesn't find
any devices, double-
check the device is
plugged in to your
computer with the USB
cable provided and click
“Scan Again”.
As soon as a device
has been identified, it
will appear in the table
(left) and automatically
register that device to
your LogTag Online
account.
Running the Connection
Wizard continued...
You have now created your account and is now
ready to set up connection of your UTRED30-WiFi to
the WiFi network.
Y
ou
h
ave now create
d
y
our account an
d
i
s now
read
y
to set u
p
connection o
f
y
our UTRED30-WiFi to
the
WiFi
n
et
w
o
r
k.
Page 9
The Status will turn green
with the text “Registered”
once complete.
1. Network settings are automatically populated
from PC settings by default, if it can be discovered.
Alternatively, click the Network Name arrow to see
Connecting to your WiFi
Network
If one or more device(s) are identified and registered,
the screen automatically switches to the next screen
If one or more device(s) are identified and re
g
istered,
t
h
e screen automat
i
ca
lly
sw
i
tc
h
es to t
h
e next scree
n
Page 10
nearby Wireless Networks options and select your WiFi
Network from the list and type the password for the
network. Remember that passwords are
case-sensitive.
Note: If you need to make any Advanced Network
setting changes, select the ‘Advanced Settings’ box.
2. Once you have provided the chosen network and
password, or Advanced Network settings, click “Next”.
Note: Some WiFi Networks won’t appear in this list for
security purposes. If you are aware that your network
is one of these, you can manually type the name of
your network (SSID) in the Network Name field instead
of clicking the menu arrow.
Altri manuali per UTRED30-WiFi
5
Indice
