LOKMAT ATTACK 3 Manuale utente
1.English
2.中文
3.Português
4.Русский
5.Melayu
6.español
7.Français
8.Deutsche
9.한국인
10.ไทย
1-5
6-9
10-14
15-19
20-24
25-29
30-34
35-39
40-44
45-49
When opening the box, check for the following items:
1. smartwatches *1
2. magnetic suction charging cable *1
3 Operation guidance *1
Start using
Welcome to the ATTACK 3, product to accompany you throughout the day and monitor your personal
health.
Set the watch
ATTACK 3 is compatible with most brands of smartphones on the market. Android supports systems
above 4.4 and systems above iOS 8.0. Use the following QR code to download and install FZG Fit App.
IOS Android
1
Watch charging:
1) Please charge the watch for 1-2 hours before using this product.
2) connects the Pogo cable to the power adapter and then charges the watch.
3) strictly connecting Pogo charging cables to metal products or may cause fire.
Methods to solve the charging fault:
1）If the connection between the charging cable and the charger is unstable, reconnect the data cable
and the charger.
2) fails to open it on or charge it, use a charger of 5V / 2A or higher to charge the device for more than
20 minutes to activate the battery.
Button definition
Up key: ① Long 3S switch machine; ② Press the main interface, short press to lock the
screen/bright screen; ③ Other function interface, short press to return to the main interface;
Down key: ① Main interface, short press to enter the function list; ② When the screen is off, short
press to brighten the screen;
Touch operation
2
1) Slide down: The shortcut menu interface.2) Slide left: main menu interface.3) Slide to the right:
Motion mode interface.
Switch watch face
1）The main interface often presses the screen for 3-5 seconds, and then slides to the left to switch
the dial.
Features introduction
Dial pad: Enter the number on the dial interface of the watch or mobile phone, and the watch and
mobile phone will be synchronized in real time.
Call log: View the recent call log of the Bluetooth connected device.
Contact: After connecting with Bluetooth to the phone, the phone book contact can synchronize to
the watch.
Message notification: After Bluetooth and the watch, the phone will be pushed to the watch.
Sports: walking, running, climbing, cycling, basketball, badminton, table tennis, football, etc.
Step ometer: View the number of steps, calories and distance.
Sleep: Automatically enter sleep monitoring to detect your deep sleep/light sleep time;
Heart rate: enter the menu, click start, the heart rate value will be automatically measured.
Blood pressure: Enter the menu, click start, the heart pressure value will be automatically measured.
Remote control photo: The watch and the mobile phone are successfully paired with Bluetooth. You
can tap on the side of the watch to take a remote photo successfully, and the photo will be saved on
3
the phone.
Remote control music: After the watch is connected to the phone’s Bluetooth, enter the music menu
to control the phone’s playback
Find the phone: enter the function, click on, the phone will ring.
Sedentary reminder: Click to enter the sedentary reminder menu to set the time period. When the
time is up, the watch will ring and vibrate to remind you.
Alarm clock: Custom setting of alarm time, ringing times, ringing bell, and reminder type.
stopwatch: start and pause in the lower left corner, continuous timing in the lower right corner.
Calculator: enter the calculator, click the soft keyboard for data input and calculation.
Calendar: View the current date, click the rose red circular button to view the current calendar, and
slide the screen up and down to switch the month.
Subject: Enter this feature to select a variety of theme display styles.
Bluetooth call: search for mobile phone Bluetooth, connection can make Bluetooth call after pairing.
Settings: power saving mode, dial switch, information screen on, gesture ringtone, volume, display,
multi-language environment, restore factory settings, etc.
Common troubleshooting
Any problems occur during use, refer to the following terms, and if the problem persists, contact the
dealer or specify a maintenance person.
1. watch cannot turn on?
Press the boot button for too short. Please press for more than 3 seconds. The battery power is too
low. Please connect the charger for charge.
2. watch automatically turns off?
Battery low please connect the charger for charge.
3. watch takes a very short time using it?
The battery is not full, make sure there is enough charge time (minimum 2 hours).
4. watch does not charge properly? 4
If the charger charging is normal, try to replace the charger.If the charge and electromagnetic suction
line is well connected, it can be tried again.
5. did not show the caller's name on a call?
When ① Bluetooth connection, check the upload address book, disconnect again; the address book
is not synchronized, please pair and reconnect again.
The sound quality of 6. calls is not very good?
① smartwatch is too far from the phone, close; where the phone signal is weak, change a call location
Exemption clause
1）Heart rate data and blood pressure obtained through the ATTACK 3 smartwatch are only a
reference and are not used as a medical and diagnostic basis;
2）Self-diagnosis and treatment is very dangerous, only professional doctors can diagnose and treat
related diseases such as hypertension and heart, it is recommended to contact a doctor for more
professional diagnostic advice;
3）Due to factors such as environmental signals, wearing posture, changes in climate environment,
and the physical condition of people, the heart rate, blood pressure provided by the ATTACK 3
smartwatch may not be completely accurate;
4) shall not make medication and treatment adjustments according to the monitoring data provided
by ATTACK 3, and should follow the advice for medication and treatment; we are not responsible for
inaccuracy of monitoring data and consequences of misuse of monitoring data and information.
5
打开箱子时请检查是否有下列物品：
1. 智能手表 *1
2. 磁吸充电线 *1
3. 操作指引 *1
开始使用
欢迎使用 ATTACK 3,本款产品能够全天陪伴您，时时监测您的个人健康。
设置手表
ATTACK 3 通过蓝牙链接可以兼容市场大部分品牌智能手机匹配使用，安卓系统支持 4.4 或以上系统，iOS 8.0
或以上系统. 通过以下二维码，可以先下载 ZG Fit App 并安装，手机会提示您输入个人身份信息，比如出生日
期，身高，体重和性别等信息，以计算步长，并估计距离，基础代谢率和卡路里燃烧。
IOS Android
手表充电：
6
1）使用本产品前，请先为手表充电 1-2 小时。
2）将 Pogo 数据线连接到电源适配器，然后为手表充电。
3）严禁将 Pogo 充电线连接到金属产品上，否则可能会引起火灾。
解决充电故障的方法：
1）如果充电线和充电器之间的连接不稳定，请重新连接数据线和充电器。
2）如果无法打开设备或对其充电，请使用 5V / 2A 或更高的充电器为设备充电 20 分钟以上，以激活电池。
基本操作
按键定义
上按键：①长按 3S 开关机；②主界面下，短按锁屏/亮屏；③其他功能界面，短按返回主界面；
下按键：①主界面，短按进入功能列表；②熄屏状态，短按亮屏；③其他功能界面，短按返回主界面；
触摸操作
1）向下滑动：快捷菜单界面。2）向左滑动：主菜单界面。3）向右滑动：运动模式界面。
切换表盘
1）主界面常按屏幕 3-5 秒，然后向左滑动切换表盘。
7
功能介绍
拨号盘：分别在手表或手机端拨号界面输入号码进入拨号，手表与手机会即时同步。
通话记录：查看连接蓝牙的设备近期通话记录。
联系人：与手机连接蓝牙后，电话簿联系人即可同步到手表。
消息通知：手机蓝牙与手表连接后，手机来信息会推送到手表。
运动：健走、跑步、登山、骑行、篮球、羽毛球、乒乓球、足球多种运动模式。
计步器：查看运动的步数、卡路里及距离。
睡眠：手表佩戴手上睡觉自动进入睡眠监测模式，自动检测您整晚深睡/浅睡时长；
心率：进入心率菜单，点击开始，手表会自动测量出心率数值。
血压：进入血压菜单，点击开始，手表会自动测量出血压数值。
遥控拍照：手表与手机蓝牙配对成功，在手机解锁亮屏且分动 apk 拍照功能打开的情况下，手表端点击远程拍
照即可成功拍照，照片保存在手机端。
遥控音乐：手表与手机蓝牙连接成功后，进入音乐菜单，点击播放即可成功播放手机内的音乐，从而操控音乐
播放器，点击减少音量，点击增加音量，点击暂停或续播，点击播放上一首，点击播放下首。
找手机：进入该功能，点击开机，手机会响铃。
闹钟：自定义设置闹铃时间，响铃次数，铃声，以及提醒类型。
秒表：点击左下角按钮开始计时，在该界面点击右下角按钮可连续计时、点击左下角按钮可暂停计时，上下滑
动屏幕可查看历史数据；秒表暂停时，再点击右下角按钮数据清空。
计算器：进入计算器，点击软键盘进行数据输入并进行计算。
8
Indice
Lingue:
