Longman F1 Manuale utente
www.Longmanlight.com 1/8
F1
System No. :P64-36-3-RGB
Document No. WI-YW-68 Version Date A0 2011-04-01
Edited by Lawrence Checked by Becken Approved by Soga
www.Longmanlight.com 2/8
First: General information
Thank you for purchasing our products. Please read this manual
carefully and completely then keep it well so that you can refer to it when
necessary.
This F1 projecting light is covered by high strength die-casting
aluminum which is able to endure high temperature, designed in a fashion
of hydrodynamic form. It takes uses high power led R, G, B and
characters of long life, low consumption, high brightness and excellent
color. It uses power switch, performs low weight and consumption, stable
capability and long life. The built-in program includes dimmer, strobe.
gradual change, fading, sound activation so much and so on. International
standard DMX 512 signal is requested.
Second: Safety Instructions
1) Pay special attention on the power source and make sure the voltage
used is the same as the one required;
2) Please do some professional enquiry from qualified people before
repair.
3) Disconnect from the power supply when install, repair and transfer the
product.
4) Protect your eyes from looking at the light source.
5) Check the earth wire is well before you use the 110 or 220V AC. In
case of safety, please choose the qualified power outlet and socket, or
you can cut it and directly connect the switch. Yellow –green wire is
earthed safely; keep the working fixture from shaking.
www.Longmanlight.com 3/8
6) On the first time use, please check the packing and confirm if there is
any damage caused by shipping.
Third: Technical Data
1) High brightness LED, digital DMX address display, easy operation
2) Voltage input: AC 100-240V/50-60HZ
3) Rated Power: 120w
4) Lamp Type: LED
5) LED Specification: 3 watt LED, Red/Green/Blue, each color 12 PCS
6) LED Life Span: 50 000 –100 000 hours.
7) Power Contradict: 1.5kv
8) Resistance: ＞２MΩ
9) DMX 512 signal
10)Control Mode: DMX mode, Master / Slave mode, Sound Control,
Auto Running
11)Channels: 6 CH
12)BeamAngel: 45 degree ( 15 and 25 degree available )
13)Size: 22*22*34 CM
14)Net Weight: 2.5kg
www.Longmanlight.com 4/8
Fourth: Display Operation
MENU
UP
DOWN
ENTER
Fifth Operation Instruction
1. MENU is a key designed to choose the next order. Pressing
MENU, you will enter the previous menu items. You can press UP
/ DOWN to choose; look at the following details:
Addr：DMX mode（A001-A512）
SOU1: Sound activated, 7 colors jumping change + strobe
SOU2: Sound activated, 7 colors jumping change, no strobe
SP: adjust the speed of programm built-in (SP00-SP15，SP00 the
DMX IN DMX OUT
MENU UP DOWN
ENTER
www.Longmanlight.com 5/8
fastest)
Pr- -：program built -in（Pr00-Pr15 16 programs in all）
ASC-：7 colors jumping change （AS00-AS15 to adjust the
speed）
FAdE：Fading in-out mode 1 （FA00-FA15 to adjust the speed）
FLAS：white strobe（FL00-FL15 to adjust the speed）
rL- -：to adjust the brightness of blue（b000- b255, b255 the
most bright）
gL- -：to adjust the brightness of green（g000- g255, g255 the
most bright）
bL- -：to adjust the brightness of red（r000- r255, r255 the most
bright）
2. Press ENTER to access the further menu setting. This process can
be saved automatically; that means you will enter the process
saved previously when you activate the light next time. For
example, if you want to choose DMX mode A001, operate as the
follows:
Press MENU to go back to the initial setting
Press UP / DOWN untill Addr appears
Press ENTER to choose, the display will shine at this moment
Press UP / DOWN to change the address code
Press ENTER to confirm; DMX mode will be saved, display stop
www.Longmanlight.com 6/8
shinning.
3. Details of program built inside（Pr- -）
Pr00: red；Pr01: green；Pr02:blue；
Pr03: yellow；Pr04: cyan；Pr05: purple；
Pr06: white；Pr07 : programm 1；Pr08: programm 2；
Pr09: programm 3；Pr10: programm 4；Pr11: programm 5；
Pr12: programm 6；Pr13: programm 7；Pr14 mixing 1-7；
Pr15: 7 colors jumping change；
Note: Pr07- Pr15 can be used to change the content of SP –and adjust the
speed of jumping. Sp00 means the fastest while Sp15 the slowest.
www.Longmanlight.com 7/8
Sixth: DMX CH List
Seventh Master / Slave Mode
Master: the master fixture can be set in any other modes except for DMX
mode. Master fixture projects order from the signal output. Only one
fixture in the line can be set as master, the rest all work as slavers.
Channel DMX value function Remark Priority
1 0-255 General Dimmer0—
—100% Must function
2 0-255 red diming 0——
100%
3 0-255 green diming 0——
100%
4 0-255 blue dimming 0——
100%
1
0-14 Speed adjust
515-255 strobe
0-255When the 6 channel is 32-223,
the channel functions as speed
adjust 2
0-31 Non-function
32-63 Dark-bright
64-95 Bright-dark
96-127 dark-bright-dark
must function CH1、2、3、4，
otherwise there will be no light, the
5 channel function as speed adjust
128-159 RGB gradual change
160-191 3 color jump change
192-223 7 color jump change
6
224-255 dark-bright-dark,
autorun
3
www.Longmanlight.com 8/8
Slaver: Set the slaver lights in DMX mode, and address code as A001. An
amplifier is required if the cable between DMX controller and light or
one light and another one is more than 60m.
Eighth: Convertion
Between XLR 3-pin and XLR 5-pin,please look at the following drawing
as reference ( standard 3-pin and 5-pin converting)
DMX512 signal cable ：Pin 1=screen Pin 2= signal- Pin
3= signal+
Nine：Contact
www.longmanlight.com
TEL: +86-20-26272917
FAX: +86-20-26271441
sales@longmanlight.com
All rights reserved for any Update of this Manual.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Longman Attrezzatura di illuminazione
