Longvast GVP-201 Manuale utente

Granvista Plus Series

H.264 2-Megapixel Network Camera

GVP-201 / GVP-201W

User’s Manual

Version: 1.21

Revised July, 2011

Contents

Notices .................................................................................................................................................2

Introduction..........................................................................................................................................3

Installation............................................................................................................................................4

Using the Web UI.................................................................................................................................9

1. Live View............................................................................................................................... 11

2. Video ......................................................................................................................................13

General...............................................................................................................................13

Advanced ...........................................................................................................................14

3. Camera ...................................................................................................................................18

General...............................................................................................................................18

Advanced ...........................................................................................................................20

4. Event ......................................................................................................................................21

Event Server.......................................................................................................................22

Motion Detection ...............................................................................................................24

Event Configuration...........................................................................................................25

5. Schedule.................................................................................................................................29

General...............................................................................................................................29

Storage ...............................................................................................................................29

6. Network..................................................................................................................................34

General...............................................................................................................................34

Advanced ...........................................................................................................................35

SMTP (E-Mail) ..................................................................................................................37

DDNS.................................................................................................................................38

Wireless (GVP-201W) .......................................................................................................43

7. System....................................................................................................................................45

Information.........................................................................................................................45

User ....................................................................................................................................46

Date & Time.......................................................................................................................47

Server Maintenance............................................................................................................47

Log Service ........................................................................................................................49

8. Customize ..............................................................................................................................49

9. FAQ........................................................................................................................................51

Appendix I: An example of how to set up users’ own FTP servers ...........................................56

Appendix II: How to install the VLC program..........................................................................65

Appendix III: How to replay the recorded video clips with VLC program...............................67

Notices

This user manual is intended for administrators and users of the GVP-201/GVP-201W Network Camera,

including instructions for using and managing the camera on your network. The use of surveillance devices

may be prohibited by law in your country. It is the user’s responsibility to ensure that the operation of such

devices is legal before installing this unit for its intended use.

Before the Network Camera is installed, all the safety and operating instructions should be carefully read and

followed to avoid damage due to faulty assembly and installation. This also ensures the product is used

properly as intended.

Heed all warnings

¾Do not drop or strike this equipment

Sensitive electronics inside the camera are vulnerable to excessive strike.

¾Do not install the equipment near any flames or heat sources

Excessive heat could damage this equipment.

¾Do not cover cloth or to install this equipment in poorly ventilated places.

Overheating could damage this equipment.

¾Do not expose this equipment to rain or moisture. Do not touch the power connection with

wet hands

Risk of short circuit, electric shock or fire

¾Do not damage the power cord or leave it under pressure

Risk of fire or shock circuit

¾To reduce the risk of electric shock, do not remove the Cover (or Back).

No user-serviceable parts inside. Misusage, improper, and negligence could damage this

equipment. Need to refer servicing to qualified

service personnel.

¾Do not continue to operate if it appears to be

faulted.

If the unit ceases functioning, contact qualified

service personnel for help.

¾Any works related to detailed service or repair of

this product should be made by qualified

personnel only.

¾We strongly recommend to use the metal

mounting stand, and to screw the

bracket/spacer tight for optimal heat

dissipation.

Introduction

Both GVP-201 and GVP-201W are of compact and high resolution (1600x1200) Network Cameras

featured with superior H.264-AVC performance and multiple functions. They are perfect for indoor

applications such as factories, retailer stores, residence, restaurants, hotels, schools and pre-schools,

caring centers, etc.

GVP-201’s H.264-AVC video compression has significantly lowered down the requirements for bandwidth

and storage size without compromising image quality. Motion JPEG and multiple independent video

streaming are also supported for even better flexibility.

The camera offers wired Ethernet connection to the network and optional wireless connectivity

(IEEE802.11b/g) for flexible installations. It includes 7 IR LEDs for illuminating the scene automatically or

when requested by the user. Further functions include two-way audio with integrated high-sensitivity

microphone and audio output, Micro SD card support and digital PTZ (4X) to focus any location you would

like to highlight in the image.

Installation

1. Hardware Connection

2. Software Installation

The following software is necessary for the proper display and use of the camera from the Web site. The

software will be taken from the Software Package CD.

IP Installer

The IP Installer is used to locate and configure Network Cameras and video servers on the LAN. This

utility is useful for conveniently configuring the network settings of the device, or for finding a device

once the network settings have been modified.

To install the IP Installer, from the Software Package CD UI, select IPInstaller, and then follow the on

screen instructions.

VLC

Though not necessary, this can be used for viewing the streaming without a Web browser. Besides, the

VLC may be helpful in reviewing the recorded video files in the Micro SD card. Please refer to the

appendix II & III for more details on how to install and use the VLC program.

Network Configuration

IPInstaller is a utility that provides an easier, more efficient way to configure the IP address and network

settings of the devices. It even provides a convenient way to set the network settings for multiple

devices simultaneously using the batch setting function. Moreover, IP Installer can save the network

settings for all devices as a backup and restore them when necessary. IPInstaller is able to help

non-professional users to quickly setup their network cameras to work in a professional manner.

Preparation before IP Assignment

1. Always consult your network administrator before assigning an IP address to your server in order to

avoid using a previously assigned IP address.

2. Ensure the device is powered on and correctly connected to the network. This network can be simply a

hub, PC and the network camera; and the network camera may directly connect to the PC too.

3. MAC Address: Each device has a unique Ethernet address (MAC address) shown on the label of the

device as the serial number (S/N) with 12 digits (e.g. 000429-XXXXXX).

4. Although the IPInstaller is able to find and configure any Network Cameras in the LAN except those that

are behind a router, it is a good idea to set the host PC to the same subnet. In order to connect to the

Web-based user interface of the camera, the host PC must be in the same subnet. For more information

*0004290000

about subnets, please consult your network administrator.

Using IPInstaller to Assign an IP Address to GVP-201 / GVP-201W

1. Once IP Installer has been successfully installed on the PC, double click the IPInstaller icon on the

desktop, or select it from Start > Programs > IP Installer > Launch IP Installer.

2. Click the “Device Search” tool bar and search the device in the LAN.

Please note that he firewalls of your Windows or Anti-virus software might block IPInstaller from

searching the cameras. In this case you would need to unblock IPInstaller software from the firewalls, or

to manually make this IPInstaller software an exception to the firewalls.

3. From the list, select the device with the MAC Address that corresponds to the device which is to be

configured. The MAC Address is identical to the unit’s S/N (Serial Number).

4. Select the “Single Device Setting” item to open the Property Page for the selected device.

5. After filling in the properties, click [Set] button to complete the configuration settings in the remote

device.

Example about how to know the user’s PC and network information from command prompt. Simply type in

“ipconfig” in the Command Prompt screen, press Enter, and you will see the related information which

shows you the PC’s IP, Subnet Mask, Default Gateway, etc.

The first three digits of the network camera’s IP must be same as the first three digits of the PC’s IP

address. In the above example the PC’s IP address is 192.168.1.6., and we have set the camera’s IP to be

192.168.1.188..

Open the Web-based UI of the Selected camera

1. To access the Web-based user interface of the selected unit by selecting “Open web” from the slide-bar.

2. If the device has been configured correctly, the default Web browser, the Internet Explorer, will open to

the home page of the selected device.

3. If you find your browser is opened and automatically connected to the camera Home Page, it means

you’ve assigned an IP Address to the unit successfully. Now you can close the IP Installer and start to

use your camera.

4. Usually the users no longer need to run the IPInstaller software again after configuring the cameras

correctly.

Verify and Complete the Installation from Your Browser

If not able to get the ActiveX downloaded properly, user must temporarily lower the security settings to

perform a one-time-only installation of the ActiveX component onto the workstation, as described below:

- From the Tools menu, select [Internet Options] -> [Security] -> [Custom Level]

- Set the security level to Low and click [OK].

- Depends on different versions of browser software used, the users may have to set the individual ActiveX

settings from “Disable” to “Prompt” or “Enable” if necessary for completing the ActiveX program

downloads.

- Restore the security level after the ActiveX installation.

Using the Web UI

Start your Web browser and enter the URL or IP address in the Address field. The Home page of the

camera is now displayed.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Longvast Telecamera di sicurezza

Longvast

Longvast Granvista Plus GVP-221 Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente