FCC RF Radiation Exposure Statement
This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the
radiator and your body.
FCC Compliance Statement
15.21
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
15.105(b)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•
•Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received,
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this
manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our
comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two-year warranty. StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the
products may be returned for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages
arising from misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
Verify the software installation
To verify that the software was installed correctly on a computer
running a version of Windows, complete the following:
1. Depending on the version of software that you’re running, do one
of the following to open the Device Manager:
•Click Start > Control Panel > System and Security > Device
Manager.
•Click the Start icon in the taskbar and type device manager in
the Search Device Manager.
choice.
2. Expand Network adapters.
3. Right-click Realtek 8821AE Wireless LAN 802.11ac PCI-E NIC and
click Properties.
4. On the General tab, review the Device status and make sure that
the device is working properly.
Connect to a Wi-Fi network
Connecting to a wireless network is done through either the
utility. To connect to a wireless network, you need to know the name
of the wireless network (SSID), the type of security it’s using (if any),
and the associated password. For more information, consult the
documentation for your wireless access point (AP) or contact your
network administrator.
1. To display a list of the available networks, depending on the
version of Windows OS that you’re running, do one of the
following:
•Navigate to the Network Settings screen.
•In the system tray, click the network adapter icon.
2. Click Connect next to the SSID for the Wi-Fi network that you
want to connect to.
3. If necessary, enter the password for the network.
About the LED indicator
The LP-8014 includes a green activity LED located next to the antenna
connectors. The LED blinks when there is activity on a 2.4 or 5 GHz
connection.
