Loopcomm 1t1r Manuale utente
Wireless 11n Smart Repeater AP
User Manual
Wireless 11n Smart RepeaterAP
(1T1R)
© 2014
V1.1.1
Wireless 11n Smart Repeater AP
User Manual
Table of Contents
1. Introduction ...................................................................................................................................3
1.1 Package contents ................................................................................................................ 3
1.2 Product Features................................................................................................................. 3
1.3 Front Panel Description...................................................................................................... 4
1.4 Rear Panel Description....................................................................................................... 5
2. Installation.....................................................................................................................................6
2.1 Hardware Installation ......................................................................................................... 6
2.2 Software Installation........................................................................................................... 6
3. Management and configuration on the Wireless AP Router..........................................................9
3.1 Smart Setup Wizard............................................................................................................ 9
3.1.1 Scan for Network................................................................................................... 10
3.1.2 Setup Security (if necessary)................................................................................. 11
3.1.3 Repeater Settings................................................................................................... 12
3.2 Wireless Settings .............................................................................................................. 13
3.2.1 Home Network Settings ........................................................................................ 13
3.2.2 Extended Network Settings................................................................................... 14
3.2.3 Security.................................................................................................................. 15
3.2.4 Wi-Fi Protected Setup (WPS)................................................................................ 16
3.2.5 Advanced Setting................................................................................................... 17
3.3 Smart Features.................................................................................................................. 17
3.3.1 Access Schedule .................................................................................................... 17
3.3.2 User Access Control.............................................................................................. 18
3.3.3 Wireless Coverage Controls.................................................................................. 19
3.4 IP Settings......................................................................................................................... 20
3.4.1 Extended Network IP Settings (LAN)................................................................... 20
3.5 Management..................................................................................................................... 21
3.5.1 Smart Repeater Status............................................................................................ 21
3.5.2 Network Statistics.................................................................................................. 22
3.5.3 System Clock......................................................................................................... 22
3.5.4 System Logs.......................................................................................................... 23
3.5.5 Upgrade Firmware................................................................................................. 23
3.6.6 Save/Reload Settings............................................................................................. 24
3.5.7 Password................................................................................................................ 24
V1.1.1
Wireless 11n Smart Repeater AP
User Manual
1. Introduction
The Wireless AP is IEEE 802.11b/g/n solution; setting SOHO and enterprise standard for high performance, secure,
manageable and reliable wireless networks.
1.1 Package contents
The package of the wireless smart repeater AP includes the following items
Smart Repeater AP
DC 12V Power Adapter
CD : User Manual
QIG
External 5dBi Omni Antenna x1
RJ-45 Cable
Stand
1.2 Product Features
Support advanced 1x1 Technology with up to 150Mbps for wireless transmission
Complies with 2.4GHz IEEE802.11n and IEEE802.11b/g standards
Support 20MHz and 40MHz bandwidth
Easy quick setup wizard with web-based utility
One 5dBi antennas
Increased Wireless Coverage
Add additional Ethernet connections
Smart Wizard for configuration and security
The repeater works with 802.11 b/g/n Wi-Fi networks
V1.1.1
Wireless 11n Smart Repeater AP
User Manual
1.3 Front Panel Description
LED Indicator State Description
POWER on The Wireless AP Router is power on.
off The Wireless AP Router is power off
WLAN Flashing Data is transmitting or receiving on the antenna.
off No data is transmitting or receiving on the antenna.
LAN 1~5
Flashing Data is transmitting or receiving on the LAN interface.
on Port linked.
off No link.
WPS
Flashing 1sec flash light /1sec light dark / attempt to communicate
with wireless client
On When user press WPS button
off Default No link
V1.1.1
Wireless 11n Smart Repeater AP
User Manual
1.4 Rear Panel Description
Interfaces Description
SMA The Wireless LAN Antenna.
Reset Push continually the reset button 5 ~ 10 seconds to reset the
configuration parameters to factory defaults.
WPS Push the WPS button implementation to reduce the network
configuration steps, and also easy to implement network security.
LAN The RJ-45 sockets allow LAN connection through Category 5 cables.
Support auto-sensing on 10/100M speed and half/ full duplex; comply
with IEEE 802.3/ 802.3u respectively.
DC PWR The power jack allows an external DC power supply connection.
The external DC adaptor provide adaptive power requirement to the
WLAN Broadband Router.
V1.1.1
Wireless 11n Smart Repeater AP
User Manual
2. Installation
2.1 Hardware Installation
Hardware Installation
Step 1: Place the Wireless Access Point to the optimum transmission location. The best transmission location for your
Wireless Access Point is usually at the geographic center of your wireless network, with line of sign to all of your
mobile stations.
Step 2: Connect the Wireless Access Point to your wired network. Connect the Ethernet LAN interface of Wireless
Access Point by category 5 Ethernet cable to your switch/ hub/ xDSL modem or cable modem. A straight-through
Ethernet cable with appropriate cable length is needed.
Step 3: Supply DC power to the Wireless Access Point. Use only the AC/DC power adapter supplied with the
Wireless Access Point; it may occur to damage by using a different type of power adapter.
The hardware installation is finished.
2.2 Software Installation
There is no software drivers, patches or utilities installation needed, but only the configuration setting..
Notice: It will take about 1 minute to complete the boot up sequence after powered on the Wireless Access Point;
Power LED will be active, and after that the WLAN Activity LED will be flashing to show the WLAN interface is
enabled and working now.
V1.1.1
Wireless 11n Smart Repeater AP
User Manual
2.3 Browser to Access the Setup Wizard
1. into local area connection status
V1.1.1
Wireless 11n Smart Repeater AP
User Manual
2. Setting Internet Protocol (TPC/IP)
3. Choosing IP and DNS to automatically address.
4. Open your web browser and enter setup.loopcomm.com on the URL field to log in.
Note. Default IP address: 192.168.1.250
Default Web domain name: http://setup.loopcomm.com
V1.1.1
Wireless 11n Smart Repeater AP
User Manual
3. Management and configuration on the Wireless AP Router
3.1 Smart Setup Wizard
Welcome to the smart setup wizard. When the web menu appears, click next to continue to the next page.
V1.1.1
Wireless 11n Smart Repeater AP
User Manual
3.1.1 Scan for Network
1. Click SCAN to begin searching for available wireless networks to repeat.
2. Select your network and click “Next” to continue.
3. If you fail to find any wireless networks, the Smart Repeater may be placed too far from the wireless network
that you are trying to repeat.
4. Move your Smart Repeater closer to the wireless network that you are trying to repeat and click SCAN again.
5. The Scan results page will display information regarding the name of the network (SSID), the channel which
the wireless network is operating on and the type of network that it is.
6. AP stands for Access Point and is the standard type of wireless network.
7. The results page will also display whether or not your network has security and what the signal strength is
coming from each specific network detected.
V1.1.1
Indice
Altri manuali Loopcomm Ripetitore
